24V 10M IP67 3528 WHITE OUTDOOR LED STRIP - 60 LEDS/M - 10M (STRIP ONLY)

Name: 24V 10M IP67 3528 WHITE OUTDOOR LED STRIP - 60 LEDS/M - 10M (STRIP ONLY)
Brand: LED MONTREAL
SKU: 352824606710-4000
Price: 102.97 CAD
Availability: InStock

SKU: 352824606710-4000

Brand: LED MONTREAL

Bring clean, even light exactly where you want it with the 24V 10M IP67 3528 White Outdoor LED Strip - 60 LEDs/m - 10m (Strip only), SKU 352824606710-4000 from LED MONTREAL. Whether you call it an LED strip light, LED tape, ribbon light or simply LED strip lighting, this is the flexible, weather-ready roll people reach for when they want a continuous line of light instead of a row of hot spots. It slips under a gazebo beam, along an awning, into a soffit, around a covered terrace, under a handrail, behind a garden feature or above an outdoor sign, and it disappears into the architecture while the light does the talking. Note that it is not intended for pool lighting.

Built on an Epistar 3528 SMD chip with a 2-ounce circuit board, the strip packs 60 LEDs per meter — 600 LEDs across its full 10 meters — for a smooth, dotted-free look. It draws 4.8W per meter and delivers a typical 400 lumens per meter at 4000K Natural White, with a CRI of 80+ and a wide 120° beam that spreads light instead of pinching it. The 24V DC design is what lets you run a full 10-meter length with consistent brightness end to end. It measures 10 mm wide by 5 mm high, carries an IP67 rating, is cULus certified for Canada and the USA (E498952), and is rated for 50,000+ hours. It is dimmable with a low-voltage dimmer/remote combo or with a dimmable power supply paired with a 120V AC dimmer, and it can be cut every 6 LEDs (100 mm).

This roll is at home on backyard patios, covered decks, pergolas, garages, restaurant terrasses, storefront signage, retail displays and cove details — anywhere in Canada where the fixture sees humidity, splashing or protected outdoor exposure, with an operating range of 40C to -10C. The 3M self-adhesive backing makes the run fast, and the included connections — a female DC plug (17 cm) on one end and two wires (17 cm) on the other — make wiring straightforward. Remember this is the strip only: plan a power supply sized at the recommended 6W per meter. Roll it out and light your project the easy way.

Sold separately
To complete the installation, add:
Power supply: 24V10AETLPSU, 24V1AETLPSU, 24V2AETLPSU, 24V3AETLPSU, 24V4AETLPSU, 24V6AETLPSU, 24V8AETLPSU, 3X96W

Construction you can trust outdoors
This outdoor LED strip is built for real conditions, not just showroom shelves. The flexible circuit board uses 2 ounces of copper, which helps the strip handle current and heat more gracefully over long runs, and the whole assembly is sealed to an IP67 rating so humidity, dust and splashing are not a problem. It is rated for dry and humid environments, indoor and protected outdoor use, with an operating temperature range of 40C to -10C — useful when a covered terrace or soffit run has to survive a Canadian shoulder season. Heat dissipation hardware is not necessary, unless the strip is used in a commercial environment.

Light quality
Density is what separates a good LED tape light from a disappointing one. With 60 LEDs per meter on Epistar 3528 SMD chips, the light reads as a continuous line rather than a string of dots, especially when it is tucked into a cove or channel. Typical output is 400 lumens per meter, the colour temperature is 4000K Natural White — a crisp, neutral tone that flatters wood, stone and painted surfaces without going blue — and the CRI of 80+ keeps colours honest. The 120° lighting angle washes surfaces broadly, which is exactly what you want for grazing a wall, lighting a ceiling cove or backlighting signage.

Technical specifications
SKU: 352824606710-4000
Brand: LED MONTREAL
Model: MTL-FP8AEIWM-60AXX
Certification: cULus for Canada and USA E498952
Chip: Epistar 3528 SMD
Circuit board: 2 Ounces
Chip density: 60 LEDs per meter
Can be cut: All 6 LEDs (100mm)
Length: 10 meters
Width: 10mm
Height: 5mm
Voltage: 24V DC
Power consumption: 4.8W/m
Recommended power supply: 6W/m
Typical luminous flux: 400 Lumens/m
Colour temperature: 4000K Natural White
CRI: 80+
Lighting angle: 120°
Lifespan: 50 000+ Hours
Self-adhesive: 3M
IP rating: IP67
Dimmable: Yes

Electrical and installation details
The 24V DC platform is the reason you can run the full 10 meters in one continuous line while keeping brightness even from the first LED to the last. Size your driver from the recommended 6W per meter, not from the 4.8W/m consumption, so the supply is never working at its ceiling. One end of the strip comes with a female DC plug (17 cm) and the other with two wires (17 cm), so you can plug into a matching supply or hard-wire as the job requires. Cuts are made every 6 LEDs (100 mm) at the marked points, and the 3M self-adhesive back holds on clean, dry, degreased surfaces — for rough wood, brick or overhead runs, add mechanical clips. For dimming, use a low-voltage dimmer/remote combo on the DC side, or a dimmable power supply controlled by a 120V AC dimmer on the line side.

Applications and documentation
Think gazebo rafters, pergola beams, awning valances, covered patios, soffit and cove details, stair nosings, garden walls, bar fronts, retail shelving and illuminated storefront signage — residential and commercial projects alike. At 10 mm wide and 5 mm high, the strip hides inside slim aluminum channels or behind a simple trim board. It is not suggested for pool lighting or any submerged application. The full technical spec sheet for this model is available in the Documentation tab of this page, so you can confirm dimensions, load and certification before you order your power supply and accessories.

Technical Files