Built for LED tape, not borrowed from something else
Plenty of failed strip light installs trace back to one thing: the wrong power source. This 12V 5A (60W) power supply was designed specifically to feed LED strips, delivering steady low-voltage current instead of the noisy, fluctuating output that causes flicker, buzzing and premature LED failure. The housing is a compact rectangular transformer box with an attached lead for the strip connection and a separate power cable for the wall, keeping the whole assembly tidy behind a cabinet or above a ceiling cove. Because it is a plug-in unit, installation is genuinely DIY-friendly — position the box where air can circulate, run your low-voltage wire to the strip, and you're lit.
Technical specifications
SKU: PWR12V5A
Brand: CDNLUX
Certification: cULus for Canada and USA
Input: 120V AC power cable
Output: 12V 5A 60W
Dimmable: No
Transformer box length: 11.5 cm
Transformer box width: 5 cm
Transformer box height: 3.2 cm
Package includes: 5A (60W) power supply, power cable
Electrical and installation details
The input side is a standard 120V AC power cable, so the supply connects directly to a common household or office receptacle — no hard-wiring required, which is why it is such a popular answer for renovators who don't want to open walls. The output side provides 12V 5A (60W). Match that output to your strip's voltage and to the total draw of the run you plan to power: add up the consumption of the tape length you intend to connect and keep it comfortably under the supply's capacity. Overloading the unit will damage it, and an undersized supply is the number one cause of dim ends and uneven colour. Mount the box somewhere ventilated and accessible — inside a cabinet, in a valance, above a drop ceiling — rather than sealed inside insulation, and keep it in a dry indoor location.
Compatibility and dimming
This power supply for LED strips works with the single colour and RGB LED strips offered by LED MONTREAL that share the same voltage rating. The unit itself is not dimmable, and that's by design: with low-voltage tape, dimming and colour control belong downstream. Install a compatible controller between the power supply and the strip — a simple dimmer module for single colour tape, or an RGB controller when you want colour changes, scenes and fades. That approach keeps the electrical side clean and lets you upgrade the control layer later without replacing the transformer. Before finalizing your layout, read the maximum circuit length stated in your strip's product description; running past it reduces brightness and destabilizes colour, no matter how large the power supply is.
Where it earns its keep, and documentation
Think under-cabinet and toe-kick kitchen strip lighting, crown-moulding cove lighting in a living room, backlit bathroom mirrors and niches, stair and hallway accents, closet and pantry shelves, bar fronts and back-bar bottle displays, retail shelving and display cases, salon stations, office reception logos, workshop benches and basement rec rooms. It suits both residential and commercial projects across Canada, and its cULus certification for Canada and the USA gives contractors and small business owners the paperwork confidence they need. Full details are available in the technical PDF found in the Documentation tab of this page — worth a quick read before you size your run, so your tape, your controller and your power supply all work together from day one.
