AST TRACK - MINI JOINER - H TYPE - 1 CIRCUIT - BLACK

Name: AST TRACK - MINI JOINER - H TYPE - 1 CIRCUIT - BLACK
Brand: TUROLIGHT
SKU: AST-TRK-H-MJ-BK
Price: 10.97 CAD
Availability: InStock

SKU: AST-TRK-H-MJ-BK

Brand: TUROLIGHT

Joining two sections of track shouldn't be the hard part of your lighting project — and with this mini joiner, it isn't. The AST TRACK mini joiner (SKU AST-TRK-H-MJ-BK) from TUROLIGHT is the small, low-profile connector that links two runs of ASTELLA H-type single-circuit track end to end, in a straight line, with almost nothing showing between them. People look for it under all kinds of names — track lighting connector, straight connector, track joiner, inline coupler, mini splice or simply the piece that joins two track rails together — but the job is always the same: turn two shorter sections into one continuous, powered run that carries your track light heads wherever you need them. In black, it disappears against black track and dark ceilings, which is exactly what you want when the light should be the star and the hardware should stay quiet.

This joiner belongs to the ASTELLA Track System, H-type, single circuit, rated 120V, 60Hz, 20A, Class I, IP20 for indoor use. It is a 1-circuit (P + N + PE) system, so the joiner carries line, neutral and ground through the splice and keeps the polarity line of the track continuous from one section to the next. Installation follows the same logic as the rest of the family: loosen the set screws before sliding the connector into the open end of the track, select the correct grounding tab so circuit polarity and grounding are maintained, then tighten the set screws before turning the power back on. Because it is a mini joiner, the gap between the two track sections stays tight and the run reads as one clean line instead of a patched-together assembly.

Use it anywhere a single length of track won't reach: a long kitchen island and dining area in a renovated home, a retail wall that needs 10 or 12 feet of continuous accent lighting, a gallery, a café, a salon, a showroom or an office reception. It is made for the ASTELLA H-type 1-circuit track, so it works directly with AST Track 2 ft H type black, AST Track 4 ft H type black and AST Track 6 ft H type black, and it will join white sections such as AST Track 8 ft H type white just as well. Plan your run, add the joiners you need, and build the track layout your space actually calls for.

Compatible with
Works with:
Channel / profile: AST-TRK-H-02-BK, AST-TRK-H-04-BK, AST-TRK-H-06-BK, AST-TRK-H-08-BK, AST-TRK-H-12-BK

10.97$

Supplier availability: In stock (+500)

Learn more
Documentation

Built for a clean, continuous run
The mini joiner is the straight, inline connector of the TUROLIGHT ASTELLA family. Its purpose is simple and mechanical: two track sections slide onto it, the set screws lock them in place, and the electrical path continues without interruption. Because it is a mini format, it keeps the two rails nose to nose so a 4 ft plus 4 ft run looks like a single 8 ft line on the ceiling rather than two pieces stuck together. The black finish matches black track rails and blends into dark ceilings, exposed structures and matte-black hardware, while the same joiner can be used on white track when you simply need the mechanical and electrical link and the connection point isn't in a sight line.

Electrical and installation details
This is an H-type, single-circuit component for a 120V, 60Hz, 20A system, Class I, rated IP20 for dry indoor locations, with a 1-way (P + N + PE) configuration. The installation sequence from the instruction sheet is straightforward: shut the power off at the main panel before installing any track or accessory; mount the track sections first, using toggle bolts in drywall or plaster (5/8 mounting holes) or standard #10 wood screws on wood surfaces; then prepare the connector. Select the correct grounding tab — the tabs must be prepared before sliding the connector onto the NON-GROUND conductor side tab of the track section you are joining, and if the wrong tab has been removed, do not use the connector, because grounding will not be maintained. Loosen the set screws on the connector before sliding it into the open end of the track, align the polarity lines, then tighten the set screws. Finish by sliding dead-end caps into ALL remaining open ends of the track and tightening their set screws before energizing. Local installation requirements must be respected, and to reduce the risk of fire and electric shock, use only fixture assemblies marked for use with TUROLIGHT track.

Technical specifications
SKU: AST-TRK-H-MJ-BK
Brand: TUROLIGHT
System: ASTELLA Track System, H-type, single circuit
Type: Mini joiner (straight inline connector)
Voltage: 120V, 60Hz, 20A
Circuit: 1 way (P + N + PE)
Class: Class I
Ingress protection: IP20
Finish: Black

Compatibility and how to plan your run
The joiner is part of a full accessory range built around the AST-TRK track: live-end and end feeds, X, L, T and straight connectors, floating connectors and dead ends all share the same H-type single-circuit profile. For the track itself, this connector joins the black sections — AST Track 2 ft H type black, AST Track 4 ft H type black, AST Track 6 ft H type black — and the white sections such as AST Track 12 ft H type white. A good rule when you spec: measure the total run you want, choose the fewest track lengths that add up to it, and order one mini joiner for every junction between two sections. Track heads and lampholders install on the rail afterwards by aligning the polarity lines, pushing the adapter into the slot and turning 90°; if the adapter doesn't turn easily, don't force it — turn the other way.

Where it earns its keep
Retail is the classic case: a long merchandising wall or a row of display tables needs an uninterrupted line of track light heads, and a single stock length rarely covers it. At home, it's the kitchen-to-dining run, a hallway with artwork, a finished basement or a loft with exposed beams. In commercial spaces — cafés, salons, clinics, showrooms, offices and small galleries across Canada — joined runs let you re-aim and add fixtures later without touching the ceiling again, which is a real advantage when a layout changes with the seasons. The installation instruction sheet for the ASTELLA H-type single-circuit system (applicable to AST-TRK models) is available as a PDF in the Documentation tab of this page, in English and in French. Add the mini joiners to your order with your track and build the continuous track lighting layout your project deserves.

Technical Files