AST TRACK - 2 FT - H TYPE - 1 CIRCUIT - 120V - BLACK

Name: AST TRACK - 2 FT - H TYPE - 1 CIRCUIT - 120V - BLACK
Brand: TUROLIGHT
SKU: AST-TRK-H-02-BK
Price: 36.97 CAD
Availability: InStock

SKU: AST-TRK-H-02-BK

Brand: TUROLIGHT

Give your lights the freedom to move. The AST TRACK - 2 FT - H TYPE - 1 CIRCUIT - 120V - BLACK from TUROLIGHT is a short section of H-type track rail — what most people call a track lighting rail, a lighting track bar or simply a 2 ft track — finished in a clean matte-look black that disappears against dark ceilings and stands out beautifully on white ones. It belongs to the ASTELLA track system, a single-circuit platform built so you can clip on, slide and aim your track heads exactly where the light is needed, then change your mind next season without touching the ceiling again. This 2-foot length is the one you reach for when you need a compact run over a kitchen island, a short stretch above a retail display, a gallery wall, or an extra segment to complete a longer layout. Because it's H-type, it accepts H-type (single-circuit) lampholders and adapters, so your track light heads and accessories simply twist into place.

This is a single-circuit track system rated 120V, 60Hz, 20A, wired as a 1-way circuit (P + N + PE) and built to Class I, IP20 for indoor, dry-location use. The 20 A rating leaves you real headroom to load several LED heads on one run, and the polarity line moulded along the rail keeps every connector and every lampholder oriented the same way, so the ground path stays intact from end to end. Mounting is straightforward: drill the fixing holes, use the supplied toggle bolts in drywall or plaster (5/8 holes), or standard #10 wood screws into solid wood. Feed, end caps and joiners slide into the open end of the rail and lock with set screws, and dead-end caps close every open end before the power goes back on. The SKU to quote is AST-TRK-H-02-BK.

Black track is a favourite in Canadian homes and small businesses: kitchens and open-concept lofts, basement rec rooms, home offices, boutiques, cafés, barbershops, galleries and showrooms where the ceiling is dark and the merchandise should be the star. Need a longer run? Mix and match with the AST Track 4 ft H type black, the AST Track 6 ft H type black or the AST Track 8 ft H type black; a white 2 ft version is available for light ceilings. Plan your run, add your heads, and take control of your lighting.

Sold separately
To complete the installation, add:
Connector: AST-TRK-H-LEC-BK
End cap: AST-TRK-H-EC-BK

36.97$

Supplier availability: In stock (+50)

Learn more
Documentation

A track system built to be reconfigured
The ASTELLA track by TUROLIGHT is an H-type, single-circuit track designed around one idea: light should follow the room, not the other way around. The 2-foot black section gives you a compact, discreet run where a full-length rail would be overkill — above a peninsula, over a reading nook, along a narrow corridor of display shelving. The underside of the rail is smooth and the flat face mounts against the ceiling or wall, while the open, elongated side of the track face receives the lampholders. Adapters twist in with a 90° turn and release with a lever, so swapping a head, adding one or re-aiming the whole run takes minutes and no rewiring.

Technical specifications
SKU: AST-TRK-H-02-BK
Brand: TUROLIGHT
System: ASTELLA Track System
Type: H-type, single circuit
Circuit: 1-way (P + N + PE)
Voltage: 120V, 60Hz
Current rating: 20A
Class / protection: Class I, IP20
Length: 2 ft
Finish: Black

Electrical and installation details
Start by shutting off the power at the main panel (fuse or breaker box) before installing the rail or any accessory. Position the track over the outlet box and mark the rail mounting holes on the ceiling or wall. In drywall or plaster, drill 5/8 fixing holes and secure the track with the supplied toggle bolts; on solid wood surfaces, use standard #10 wood screws (not supplied). Strip the supply conductors 3/8" and land them on the screw terminals of the live feed connector — no need to wrap the wire around the screw. Every connector must be slid into the open end of the rail with its set screws loosened first, then tightened. Because the track carries a polarity line, align it with the polarity line of the lampholder or connector so the ground is maintained through every joint; if the wrong grounding tab has been removed from a connector, do not use it. Finally, slide a dead-end cap into every open end and tighten the set screws before restoring power. Local installation requirements must always be respected, and only fixture assemblies marked for use with TUROLIGHT track should be installed on this rail.

Compatibility and accessories
This rail is part of the AST-TRK family, which includes the connectors and feeds you need to shape a run: live end feed, end connector, X (four-way) connector, L connector, T connector, straight connector, floating/flex connector and the mounting joiner — AST-TRK-H-LEC, AST-TRK-H-EC, AST-TRK-H-XC, AST-TRK-H-LC, AST-TRK-H-TC, AST-TRK-H-SC, AST-TRK-H-FC and AST-TRK-H-MJ. Sections join end to end, so you can start with this 2 ft piece and extend later with the 4 ft black track, the 6 ft black track, the 8 ft black track, or match a white ceiling with the 12 ft white track. Only H-type single-circuit track heads and adapters belong on this system.

Where it earns its keep, and documentation
Homeowners use short black track runs over kitchen islands, dining tables, stairwell art and basement bars; contractors like them for condo renovations where there's one existing outlet box and no appetite for cutting a dozen ceiling holes; retailers, cafés, salons and small galleries use them to wash a feature wall or spotlight a product table, then re-aim the heads when the display changes. With 120V, 60Hz, 20A on a single circuit, one short run can carry several low-draw LED heads while keeping the ceiling clean. The technical PDF (AST-TRK-H-02-BK Spec Sheet), including the full bilingual installation instructions, is available in the Documentation tab of this page — read it before you start, and keep it with the job file.

Technical Files