24V 5M IP65+ RGB+W CCT 5050 LED STRIP - 60 LEDS/M (STRIP ONLY)

Name: 24V 5M IP65+ RGB+W CCT 5050 LED STRIP - 60 LEDS/M (STRIP ONLY)
Brand: LED MONTREAL
SKU: RGBWCCT65
Price: 89.97 CAD
Availability: InStock

SKU: RGBWCCT65

Brand: LED MONTREAL

Finally, one LED strip that does colour AND real white. If you've ever installed LED strip lights and been stuck with a bluish, slightly purple "white" from mixing red, green and blue, this is the fix. The 24V 5M IP65+ RGB+W CCT 5050 LED Strip from LED MONTREAL (SKU RGBWCCT65) is a 5-in-1 LED light strip — also called LED tape, LED ribbon or strip lighting — where every 5050 chip packs five separate emitters: Red, Green, Blue, 2400K warm white and 6500K cool white. Set a party scene in deep blue or magenta at night, then switch to a clean, tunable white for cooking, reading or working the next morning. It's the strip people look for when they search led strip lighting, indoor led lighting or LED ceiling lights strip and want one product that handles both colour and everyday white light.

The numbers back up the mood. Each 5 metre roll carries 60 LEDs per meter (300 LEDs in total) on a 2 ounce copper circuit board for better heat handling and long-term colour stability. It runs on 24V DC, draws 14.4W per meter with a recommended power supply of 18W/m, and delivers a typical luminous flux of 400 lumens per meter, with a CRI of 80+ and a wide 120° beam for smooth, even light instead of dotty hot spots. Colour spans the full RGB spectrum plus adjustable white from 2400K to 6500K. The strip measures 14.5mm wide and 4.25mm high, is cuttable every 6 LEDs (50mm), comes with 3M self-adhesive backing and 6 wires (17cm) on each end for easy runs and connections. It's rated iP65+, good for dry and humid spaces, indoor and protected outdoor use, operates from 40C to -10C, is cULus Listed for Canada and USA (E498952) and is rated for 50 000+ hours. Dimmable with a low voltage controller/remote combo.

Put it under kitchen cabinets, in a cove or tray ceiling, behind a TV wall, along a staircase, in a basement bar, a home theatre, a retail display or a restaurant façade under a protected soffit — anywhere in your Canadian home or business that deserves both colour and comfortable white. This listing is the strip only, so plan on a 24V power supply sized to the length you install, a low voltage RGB+CCT controller with remote, and an aluminum channel: heat dissipation is mandatory, so mount it on a heat dissipating surface or in an appropriate aluminum profile. Roll it out, dial in your colour, and light the room your way.

Sold separately
To complete the installation, add:
Power supply: PWR24V05A, PWR24V1A, PWR24V36W, PWR24V2A, PWR24V3A, PWR24V4A, PWR24V5A

Five LEDs in one chip
The heart of this LED strip light is the Epistar 5050 RGB+W CCT SMD 5 in 1 chip. Instead of forcing three colour channels to fake a white, each package holds Red, Green, Blue, a 2400K warm white and a 6500K cool white emitter. That means saturated colours when you want drama, and a genuine, tunable white when you want function — anywhere between a candle-like 2400K and a crisp 6500K. Those five channels sit on a 2 ounce copper circuit board, a heavier base than thin economy tapes, which helps pull heat away from the diodes and keeps brightness and colour consistent over a long run.

Light quality and output
With 60 LEDs per meter and a 120° lighting angle, the light blends quickly, so you get a continuous line rather than visible dots — especially behind a frosted diffuser. Typical luminous flux is 400 lumens per meter (it will vary slightly depending on the Kelvin degrees chosen), and the CRI of 80+ keeps wood grain, paint, skin tones and food looking natural. Rated for 50 000+ hours, this LED tape is built to stay in the cove long after the renovation dust has settled.

Technical specifications
SKU: RGBWCCT65
Chip: Epistar 5050 RGB+W CCT SMD 5 in 1
Circuit board: 2 Ounces
Chip density: 60 LEDs per meter
Length: 5 meters
Width: 14.5mm
Height: 4.25mm
Can be cut: All 6 LEDs (50mm)
Voltage: 24V DC
Power consumption: 14.4W/m
Recommended power supply: 18W/m
Typical luminous flux: 400 Lumens/m
Colour: RGB + Adjustable White (2400K to 6500K)
CRI: 80+
Lighting angle: 120°
iP rating: iP65+
Operating temperature: 40C to -10C
Lifespan: 50 000+ Hours
Certification: cULus for Canada and USA E498952

Wiring, dimming and installation
This is a low voltage 24V DC product, so it needs a driver: size your power supply on the recommended 18W/m and on the exact length you are running. The strip ships with 6 wires (17cm) on one end and 6 wires (17cm) on the other end — five channels plus common — which makes it easy to feed from either side or to jump to a second section. Dimming and colour changing are done with a low voltage controller/remote combo built for RGB+CCT (5 channel) strips; a standard wall dimmer on the line side is not how this one is controlled. Cut only on the marked points, every 6 LEDs (50mm), and remember the 3M self-adhesive backing is a positioning aid, not a heat sink: the strip must be installed on a heat dissipating surface or in an appropriate aluminum channel. With an iP65+ rating it is suitable for dry and humid environment, indoor and protected outdoor use, and it operates from 40C to -10C — useful on a covered Canadian porch or in a damp basement.

Where it works and what's included
Think under-cabinet kitchen LED strip lighting, cove and tray ceilings, toe-kicks, floating shelves, closets, home theatres, basement bars, gaming rooms and bedrooms for kids who want a different colour every week. On the commercial side: retail shelving and display cases, reception desks, restaurant bars, salons, gyms and hotel corridors where staff can warm the whites in the evening and cool them during the day. Note that this listing is the strip only — no driver, controller or profile included. The technical PDF spec sheet for the 24V 5M IP65 RGB+W CCT 5050 LED Strip is available in the Documentation tab of this page for your electrician, your designer or your permit file.

Technical Files