24V 10M IP20 3528 WHITE LED STRIP - 60 LEDS/M (STRIP ONLY)

Name: 24V 10M IP20 3528 WHITE LED STRIP - 60 LEDS/M (STRIP ONLY)
Brand: LED MONTREAL
SKU: 352860IP2010M-2700
Price: 79.97 CAD
Availability: InStock

SKU: 352860IP2010M-2700

Brand: LED MONTREAL

Soft, even light exactly where you want it — that's what a good LED strip does, and this 10-metre roll makes it easy. Known as LED strip lights, LED light strips, LED tape or ribbon lighting, this LED MONTREAL 24V 3528 white LED strip (SKU 352860IP2010M-2700) is the classic choice for accent and ambient lighting: crown moulding and cove lighting, under-cabinet lighting in the kitchen, bookshelves and display cases, toe-kicks, closets, stair nosings, headboards and hallway coves. It ships as strip only, so you can pair it with the power supply, connectors and aluminum profile that suit your project.

Built around Epistar 3528 SMD chips at 60 LEDs per meter, the strip runs on 24V DC, draws 4.8W per meter and delivers a typical 400 lumens per meter in a warm 2700K warm white with a CRI of 80+, so wood, paint and fabrics keep their true colour. The 120° beam angle spreads light smoothly instead of showing hot spots, and the 2-ounce circuit board is rated for 50 000+ hours. It measures 10 meters long, only 8mm wide and 2mm thick, and can be cut every 6 LEDs (100mm) to fit a run exactly. Rated iP20 for indoor use only, it is cULus certified for Canada and the USA (E498952), comes with genuine 3M self-adhesive backing, a female DC plug (17cm) on one end and two wires (17cm) on the other, and it is dimmable.

From a Montréal condo kitchen to a boutique display wall, a basement ceiling cove or a restaurant bar back, this indoor LED strip lighting adds that finished, designer glow without a big renovation. Plan on a power supply sized at 6W per meter (recommended), stick the strip on a clean, non-glossy metal surface for best adhesion, and use an aluminum channel on wood or painted surfaces. For dimming, use a low-voltage dimmer/remote combo or a dimmable power supply with a 120V AC dimmer. Ready to light up your project? Add this 10m LED strip to your cart and finish the room the way you pictured it.

Sold separately
To complete the installation, add:
Power supply: 24V10AETLPSU, 24V1AETLPSU, 24V2AETLPSU, 24V3AETLPSU, 24V4AETLPSU, 24V6AETLPSU, 24V8AETLPSU, 3X96W

Construction and light quality
This is a straightforward, well-built white LED strip made for everyday accent work. It uses Epistar 3528 SMD chips mounted at 60 LEDs per meter on a 2-ounce copper circuit board, a heavier board that helps carry current cleanly along the run. The 120° lighting angle spreads a wide, soft wash rather than a narrow beam, which is exactly what you want when the strip is hidden in a cove, under a cabinet or behind a valance. With a typical output of 400 lumens per meter in 2700K warm white and a CRI of 80+, the light stays flattering on wood, stone and warm paint colours — cozy, not clinical. Rated life is 50 000+ hours.

Technical specifications
SKU: 352860IP2010M-2700
Model: MTL-FP8AEIDJ-60AXX
Chip: Epistar 3528 SMD
Chip density: 60 LEDs per meter
Length: 10 meters
Width: 8mm
Height: 2mm
Voltage: 24V DC
Power consumption: 4.8W/m
Recommended power supply: 6W/m
Luminous flux: 400 lumens/m
Colour temperature: 2700K warm white
CRI: 80+
Beam angle: 120°
Cut points: every 6 LEDs (100mm)
Circuit board: 2 ounces
iP rating: iP20, indoor use only
Operating temperature: 40C to -10C
Lifespan: 50 000+ hours
Certification: cULus for Canada and USA E498952

Electrical and installation details
The strip operates on 24V DC and consumes 4.8W per meter; size your driver using the recommended 6W per meter so it isn't running at its limit. Connections are already made for you: a female DC plug (17cm) on one end and two bare wires (17cm) on the other, so you can plug into a matching power supply or hard-wire into a junction box. The roll can be shortened at every cut mark — all 6 LEDs, or every 100mm — and the back carries genuine 3M adhesive. That adhesive is meant for a clean, non-glossy metallic surface; on varnished or glossy wood, mounting clips or an aluminum profile will hold far better over time. Heat dissipation is not necessary in most residential installs, but an aluminum channel is recommended in commercial environments.

Dimming and compatibility
This strip is dimmable two ways: with a low-voltage dimmer/remote combo installed after the power supply, or with a dimmable power supply controlled by a 120V AC dimmer on the line side. Because it is a single-colour 2700K strip, no RGB controller is needed — just steady warm white you can turn down for the evening. Any 24V DC power supply, connector or aluminum profile intended for 8mm-wide LED strip will work with it; just confirm the channel's inner width before ordering.

Applications and documentation
Concrete examples: a continuous cove above kitchen cabinets, under-counter task light in a bar or café, shelf lighting in a retail display, a soft glow along a basement stairwell, backlighting for a bathroom mirror niche or a reception desk in a small office. With iP20 protection it must stay dry and indoors — no bathrooms showers, exterior soffits or unheated garages exposed to moisture. The technical spec sheet (PDF) for this 24V 10M IP20 3528 white LED strip is in the Documentation tab; download it for the full specification table, cut points and connection details before you order your power supply.

Technical Files