ENDCAP (1X) #85 FINISHING (STANDARD) – (WITH HOLE) WHITE

Name: ENDCAP (1X) #85 FINISHING (STANDARD) – (WITH HOLE) WHITE
Brand: LEDCO
SKU: LCENDCAP-STAND-85-H-WH
Price: 3.97 CAD
Availability: InStock

SKU: LCENDCAP-STAND-85-H-WH

Brand: LEDCO

Every clean LED channel installation ends the same way: with a tidy cap instead of a raw aluminum edge. This is the finishing endcap #85 in white, with hole, SKU LCENDCAP-STAND-85-H-WH, sold as a single piece. People look for it as an LED channel end cap, an LED strip light end cap, an extrusion end plug or simply a closing piece for aluminum profile — same part, same job. The pre-made hole is the whole point: your supply wire, driver lead or connector slips through and exits discreetly instead of hanging out of an open profile. Cap one end with this hole version, close the opposite end with a solid cap, and your LED tape run looks finished from both sides.

This is a #85 profile-specific cap, so it is shaped to close the #85 channel family and nothing else — matching the cap to the extrusion is what gives you that flush, factory-made look. The white finish blends easily with painted drywall, white millwork, cabinetry and ceilings, so the end of the run simply disappears into the surface instead of drawing the eye. The moulded body holds its shape through handling, trimming and day-to-day use, and it presses on firmly so it stays put once seated. Because endcaps are sold individually, you can buy exactly the quantity your job needs: one per open end, two per channel, or a handful of spares for the truck.

It is the small part that makes under-cabinet lighting, cove and ceiling details, stair and toe-kick lighting, shelving, display cases and interior signage look professionally done — in homes, offices and retail spaces across Canada. Renovators use it to finish kitchen valances and bathroom mirror coves; contractors keep a stock on hand because a cut channel without caps always looks unfinished; small businesses rely on it for display and counter lighting. Installing a different profile? Have a look at the Finishing end cap #11 (with hole) or the solid Finishing end cap #11 (no hole). Add the right number of caps to your order and finish your LED channel run the way it deserves.

Compatible with
Works with:
Channel / profile: LCPROF-85-16FT-WH, LCPROF-85-16FT-WH-LENS-OPAQ, LCPROF-85-8FT-WH, LCPROF-85-8FT-WH-LENS-OPAQ

What this endcap is
This is the closing piece for an aluminum channel used with LED tape, in the #85 standard finishing style, white, with a hole. It is sold as a single unit, which means you order exactly what the job calls for rather than a fixed kit. One cap closes one end of the extrusion; the version with the hole is the one you place at the feed end, where the low-voltage wire, driver lead or strip-to-wire connector has to leave the profile. Paired with a solid cap at the opposite end, it completes the profile from both sides and turns a cut length of aluminum into a finished linear fixture.

Technical specifications
SKU: LCENDCAP-STAND-85-H-WH
Type: Finishing endcap, standard
Profile family: #85
Wire exit: with hole
Colour / finish: white
Quantity: 1 piece (1X)
Category: End Caps, Lenses & Acc.

Compatibility — read this before ordering
Endcaps are profile-specific. This one is made for the #85 channel family, so measure or identify your extrusion before you choose; a cap from another family will not seat flush and will not clip securely. If you are working with a different profile, the accessory range covers several sizes and styles for standard and deeper extrusions, including the Finishing end cap #11 (with hole) and the matching Finishing end cap #11 (no hole). For flexible neon-style LED rope, the endcaps are different again — see the Flex neon endcap 3x6 (with hole) or the Flex neon endcap 6x6 (with hole) for those profiles.

Installation tips that save callbacks
Cut your channel to length first and clean the cut edge so the cap can seat properly — a quick deburr makes all the difference. Feed the wire through the hole before you press the cap onto the profile, never after. Push until the cap sits flush with the profile edge. If the channel is mounted overhead, in a stairwell or anywhere with traffic and vibration, a small drop of adhesive keeps the cap from working loose over time. Leave a short service loop of wire inside the channel so the cap can be pulled off later for maintenance without straining the connection, and dress the wire away from the LED tape so it does not shadow the diffuser.

Where it earns its keep
Think of every place a light line has to end cleanly: under-cabinet lighting in a kitchen, cove and ceiling details in a living room or hotel corridor, stair nosing and toe-kick lighting, backlit shelving, jewellery and retail display cases, reception desks and interior signage. In homes, offices and commercial fit-ups, an open channel end collects dust and shows the raw strip; capped, the run reads as a proper architectural detail. The white version is the easy choice on white ceilings, painted bulkheads and white lacquered millwork. Note that no separate spec sheet, IES file or video is offered for this accessory — the Documentation tab is empty, so rely on your channel's profile number to confirm the match.