FINISHING END CAP #86 (BLACK - NO HOLE) – 1 UNIT

Name: FINISHING END CAP #86 (BLACK - NO HOLE) – 1 UNIT
Brand: LEDCO
SKU: LCENDCAP-STAND-86-BK
Price: 3.97 CAD
Availability: InStock

SKU: LCENDCAP-STAND-86-BK

Brand: LEDCO

Every clean LED channel run ends the same way: with a cap that hides the wiring, the tape and the raw aluminum edge. The FINISHING END CAP #86 (BLACK - NO HOLE) is that finishing piece, sold as 1 unit, made to close the open end of an aluminum LED channel. People search for it as an LED channel end cap, an LED strip light end cap, an extrusion end plug or simply a profile cap — same little part, and the one detail that separates a professional-looking cove from an unfinished one. This is the solid version: no cable opening, so it belongs at the terminating end of a run where no wire needs to pass through, leaving a smooth, sealed edge with nothing visible inside.

The finish here is black, which is exactly why it gets picked so often. A blackened cap blends into dark trim, disappears against a shadow line and keeps the colour continuous along the whole installation instead of breaking it with a bright metal dot. Keep in mind that end caps are profile-specific: this one is the #86 standard shape, so it is meant to match the #86 extrusion family. Match the cap to the extrusion shape you are installing and the edge line stays consistent from one end of the run to the other. The SKU to quote when you order is LCENDCAP-STAND-86-BK, and since it ships as a single unit, you order exactly the quantity your job needs — two per closed run, one per run that feeds power at the opposite end.

Where does it shine? Under-cabinet lighting in a kitchen renovation, cove and ceiling details, shelving, display cases and architectural accent runs in homes, offices and retail spaces. Canadian contractors and homeowners doing a basement, a boutique counter or a hallway cove all hit the same moment — the tape is glued, the diffuser is cut, and the ends look unfinished. That is where this black end cap earns its keep. Working with a different profile family? See the Finishing end cap #11 (no hole) or the version with a cable opening, the Finishing end cap #11 (with hole). Add a pair to your next channel order and finish the job right.

Compatible with
Works with:
Channel / profile: LCPROF-86-16FT-BK, LCPROF-86-16FT-BK-LENS-OPAQ, LCPROF-86-16FT-BK-LENS-OPAQ-BK, LCPROF-86-8FT-BK, LCPROF-86-8FT-BK-LENS-OPAQ, LCPROF-86-8FT-BK-LENS-OPAQ-BK

What this part is
This is a single finishing end cap in the #86 standard shape, in a black finish, without a hole. Its only job — and it does it well — is to close the open end of an aluminum LED profile once the LED tape and the diffuser are in place. Because there is no cable opening, it creates a fully closed, smooth edge: no exposed tape, no visible solder joint, no dust catching inside the extrusion. Use it at the terminating end of a run, the end where no wire has to pass through, and use a hole version at the end where the power lead enters.

Fit and finish
End caps are profile-specific, which is the single most important thing to know before you order. The cap must match the extrusion family and the cross-section shape you are installing, so confirm you are working with the #86 standard profile before adding this one to your list. Several profile styles and finishes exist across a channel system, and choosing the matching cap is what keeps the colour and the edge line consistent along the entire installation. The black finish is a deliberate design choice: it melts into dark cabinetry, black trim, matte black ceiling details and shadow-line reveals, where a bright cap would read as a visual interruption.

Installation tips that actually save time
Dry-fit the cap before you mount the channel. That one step lets you confirm the diffuser has been cut short enough to leave room for the cap — a diffuser cut flush to the channel is the most common reason a cap will not seat. A light press is usually enough to hold it in place; if the fit is snug, a small dab of adhesive at the seam locks it permanently. One more field trick: keep the cap off the run until the LED strip is powered up and tested. Verify colour, brightness and connections first, then close the end. Reopening a glued cap after the fact is no one's idea of a good time.

Real-world applications
Think of every place a linear run has to look intentional: under-cabinet lighting above a backsplash, cove and ceiling details in a living room or a lobby, shelving and closet lighting, retail display cases, and architectural accent runs in homes, offices and commercial interiors. On a kitchen island with three separate channel segments, you may need up to six caps; on a continuous perimeter cove fed from one corner, you may need one solid cap at each termination. Ordering per unit means no leftovers and no shortages mid-installation.

Related caps in the same family
If your project mixes profile types, the same finishing logic applies to the rest of the family. For standard aluminum channels there is the Finishing end cap #11 (no hole) and the Finishing end cap #11 (with hole) for the powered end. For flexible neon-style LED runs, look at the Flex neon end cap 3x6 (without hole) and the Flex neon end cap 6x6 (without hole), each also offered in a with-hole version for the feed side. Order SKU LCENDCAP-STAND-86-BK by the unit and match every run in the project.