ENDCAP (1X) #84 FINISHING (STANDARD) – (WITHOUT HOLE)

Name: ENDCAP (1X) #84 FINISHING (STANDARD) – (WITHOUT HOLE)
Brand: LEDCO
SKU: LCENDCAP-STAND-84
Price: 3.97 CAD
Availability: InStock

SKU: LCENDCAP-STAND-84

Brand: LEDCO

Finish your LED channel run the right way with the finishing end cap #84 (SKU LCENDCAP-STAND-84), the small piece that turns a length of extrusion, a diffuser and a strip of tape light into one clean, finished fixture. Shoppers look for it under many names — LED channel end caps, LED strip light end caps, aluminum profile caps, plugs or closures — and they all describe the same job: closing off the open end of the channel so nothing is left exposed. This is the solid version, sold as one unit, without hole, meant for the spots where no wire needs to exit: the far end of a lighting run, or both ends of a standalone section such as a single shelf, a mirror surround or a short cove detail.

Because there is no cable opening, the cap sits flush and solid against the extrusion walls. It is shaped to match the standard profile it is designed for, so the fit is snug and consistent instead of loose and rattly, and it holds the lens exactly where it belongs. That matters more than people expect: a diffuser that stays seated keeps the light diffusion even right to the very end of the run, with no bright hot spot or dark gap in the last few centimetres. The closed face also protects the end of the channel from impact, knocks and dust — a real advantage in a busy kitchen, a workshop or a retail aisle where carts and boxes brush past the millwork. Pair it with the matching hole version at the feed end and you get a complete, professional-looking aluminum LED channel assembly from one end to the other.

This little accessory shows up everywhere: under-cabinet lighting, cove and ceiling details, stair and hallway accents, display shelving, reception desks, closets and other light-commercial millwork. It suits a Canadian home renovation just as well as a small retail or office fit-out, where crisp edges are what separate a tidy installation from an amateur one. Working with a different profile shape? Have a look at the finishing end cap #11 (no hole) or the finishing end cap #11 (with hole), and for flexible neon runs the flex neon endcap 3x6 (without hole). Order a few extras with your profile — they are the last detail, and the first one people notice.

Compatible with
Works with:
Channel / profile: LCPROF-84-16FT, LCPROF-84-16FT-LENS-OPAQ, LCPROF-84-8FT, LCPROF-84-8FT-LENS-OPAQ

What this end cap is
The finishing end cap #84 is the closure piece for the standard aluminum profile it was shaped for. Sold as a single unit (1X) in the standard, no-hole configuration, it caps the open extremity of an LED aluminum channel and finishes the assembly of profile, lens and tape light. Installers also call these pieces plugs, closures, caps or LED strip light end caps; whatever the name, the function is the same — close the opening, protect the components inside and give the fixture a deliberate, finished edge instead of a raw cut.

Build and fit
The cap is made to match the standard profile shape it is designed for, so it seats snugly against the extrusion walls rather than floating loosely on the end. That tight fit does two useful things. First, it holds the diffuser in position, which keeps the light output even all the way to the end of the run and prevents the lens from creeping out over time as the channel heats and cools. Second, it shields the end of the channel from impact and from dust migrating inside — the kind of everyday abuse a profile takes under a cabinet, along a stair nosing or inside a display case. The solid face, with no hole, is also the cleaner look when the cap is visible at eye level.

Technical specifications
SKU: LCENDCAP-STAND-84
Type: finishing end cap, standard
Profile match: standard profile #84
Cable opening: none (without hole)
Quantity: 1 unit (1X)
Category: End Caps, Lenses & Accessories

Installation and where to use it
Plan the ends before you cut. Trim the channel square so the seam between the extrusion and the cap stays tight and invisible from normal viewing distance; a ragged cut is the number one reason a cap looks crooked. Dry-fit the diffuser and the end cap together before final mounting, check that the lens slides fully home, then fix the profile to the surface. If the installation will see vibration or frequent handling — a drawer front, a movable display, a shop counter — a small dab of adhesive on the inside faces keeps the cap firmly in place. Use the no-hole cap at the far end of the run and at both ends of a standalone section; use a version with a hole wherever the power lead or connector has to pass through. Typical projects include under-cabinet lighting, cove and ceiling details, stair and hallway accents, display shelving, reception desks, closet lighting and other light-commercial millwork, in residential renovations as easily as in small retail or office fit-outs.

Compatibility and related parts
Choose the cap that matches your extrusion: this one is for the standard #84 shape. For other profiles in the same family, see the finishing end cap #11 (no hole) and the finishing end cap #11 (with hole). If your project also uses flexible neon, the matching closures are the flex neon endcap 3x6 (without hole) and the flex neon endcap 6x6 (without hole). No spec sheet, IES file or video is provided for this accessory; selection is made by profile shape, so measure your extrusion or match it to the profile you ordered, and keep a couple of spare caps on hand for job-site breakage.