Built to last under the cabinetThe LEDBAR CCT is built around a durable extruded aluminum frame with a frosted smooth lens, a combination that does two jobs at once: the aluminum pulls heat away from the integrated LED strip, and the frosted lens hides the diodes so you see a smooth line of light instead of dots on your backsplash. The profile stays slim at 1-5/16" (33 mm) wide and 1" (25 mm) high, with an overall length of 34 7/16" (874 mm), so it tucks behind the front rail of most upper cabinets. It is approved for dry location applications only, and it complies with NFPA 70, NEC section 410.16 (A)(1) for use in closets — just keep a minimum of 6" clearance to combustible materials at all times.
Light quality and colour selectionThis is a 14W fixture producing 850 lumens at 2700 K, 1175 lumens at 3000 K, 1120 lumens at 3500 K, 1175 lumens at 4000 K and 1175 lumens at 5000 K, with the series reaching up to 96 lm/W. The 5-position
CCT select switch on the body means five selectable colour temperatures — 2700 K, 3000 K, 3500 K, 4000 K and 5000 K — chosen after installation, so you can match the bar to warm white pot lights in a kitchen or push to a cooler tone in a laundry room or workbench. With
90+ CRI, colours stay honest: fresh produce, stained oak, quartz veining and fabric samples all read correctly. The lens spreads a 125° beam angle for even coverage from counter edge to backsplash, and lumen maintenance is 70% at 60,000 hours.
Electrical, dimming and installationEach fixture includes a built-in silent, non-flicker electronic LED driver running on 120V, 50/60Hz, with a power factor greater than 0.95 and THD under 15 — clean, quiet operation with no buzz behind the cabinet door. The bar is 100~0%
dimmable using industry standard TRIAC and ELV dimmers, and an ON/OFF switch on the body lets each fixture be controlled individually. Mounting hardware is provided for standard horizontal surfaces or vertical wall surfaces. The connection type is 3-wire, and with a joiner these no-shadow linking fixtures can be linked up to 2500 mA / 300 W on one run. Minimum start temperature is -18°C and the operating range is -18°C~40°C (0°F~104°F), which matters in an unheated Canadian garage, cottage or basement shop.
Technical specificationsSKU: LCFIX-LEDBAR-34IN-CCT
Length: 34 7/16" (874 mm)
Profile: 1-5/16" (33 mm) x 1" (25 mm)
Wattage: 14
CCT: 2700 K / 3000 K / 3500 K / 4000 K / 5000 K
CRI: 90+
Beam angle: 125°
Voltage: 120V, 50/60Hz
Dimming: Yes — TRIAC / ELV, 100~0%
Connection type: 3-Wire
Power factor: >0.95
THD: <15
Rated life: 36,000 hrs
Lumen maintenance: 70% @ 60,000 hrs
Approved location: Dry
Certification: cULus
Warranty: 3 Years
Applications, compatibility and documentsThink kitchen counters and island millwork, a pantry or walk-in closet, cove lighting above cabinetry, a home office credenza, retail shelving and display cases, salon stations, bar backs and reception desks. Because the series shares the same 3-wire system, you can mix lengths on one continuous run: the shorter
LEDBAR14-CCT and
LEDBAR23-CCT fill short cabinet bays, while the
46 3/16" LEDBAR CCT and
58" LEDBAR CCT cover long walls. To jump over a sink, a corner or a stile, use the flexible 3-wire connectors:
FBT6100-WH-3 (12"),
FBT6124-WH-3 (24") or
FBT6136-WH-3 (36"). Accessories are sold separately and a power feed is required — power cords, 90° connector cords, hardwire boxes, magnetic clips and 90° mounting clips are all offered for the series. For full details, the technical PDF spec sheet (LCFIX-LEDBAR-34IN-CCT Spec Sheet) is available in the Documentation tab of this page.