Built to disappear under the cabinetThis 1-foot bar is part of the DeltaLum Shelf & Cabinet Lights range, offered in 1', 2', 3' and 4' lengths so a run can follow a whole cabinet bank. The body is
white post-painted steel, slim enough at 0.91" wide and 1.18" high to hide behind a cabinet lip, and 12.32" long for short uppers, bookcases and narrow display cases. The smooth extruded
frosted lens diffuses the diodes into one continuous line with a 120-degree beam angle — no dotted reflections on a glossy quartz or laminate counter. Efficient thermal management protects the diodes and keeps output stable over the long haul.
Light quality and field-selectable outputTwo controls sit on the side of the luminaire. The
selectable dual wattage switch sets the fixture to 5W or 3W, delivering 525 or 315 lumens, so you can dial brightness to the depth of the counter instead of over-lighting a small nook. The
selectable 3CCT switch offers three colour temperatures (30-40-50K), chosen right on the job with no need to reorder a different version — warm tones flatter wood and stone, cooler tones sharpen detail for task and display lighting. With a
CRI of ≥80, produce, baked goods, fabrics, paint and packaged merchandise keep their real colours.
Electrical, mounting and linkingThe integral driver runs on
120V, 50/60Hz and the fixture is
dimmable with compatible dimmers for softer evening ambiance. Every unit is supplied with two "L" mounting clips, two "U" mounting clips, two drywall screws, two anchors, one end cap, one 11.42" linking cord and one 61" white power cord with a moulded 2-prong plug, which allows surface or side mount installation. Luminaires may be joined together for
linkable runs using the jumper cable and end cap; the total power of all linked fixtures should not exceed 180W. For clean wire management, a separate hardwire box with on/off switching (DL-SCL/WB) is offered in the same family. Installation tip: mount the bar toward the front edge of the cabinet bottom rather than against the back wall — the light lands on the working surface instead of the backsplash, glare off glossy counters drops, and the source stays hidden from anyone standing in the room.
Technical specificationsSKU: LCFIX-CAB-120V-3CCT-1FT
Model: DL-SCL/1F/MW/MK/120V
Input wattage: 5-3W selectable
Delivered lumens: 525-315 lm
CCT: 3CCT selectable (30-40-50K)
CRI: ≥80
Voltage: 120V, 50/60Hz
Rated life: 50,000 hours
Ingress protection: IP20
Location: damp location rated
Operating temperature: -25 ˚C ~ +45 ˚C
Beam angle: 120 degrees
Dimensions (L × W × H): 12.32" × 0.91" × 1.18"
Housing: white post-painted steel
Warranty: 5 years
Applications, matching sizes and documentationRetail, residential and malls are the natural homes for this bar: under kitchen uppers, above a bar or coffee station, inside glass display cabinets, along shelving in a boutique, pharmacy or bakery, under a reception desk, or over a garage workbench. When one length is not enough, stay in the same family so the colour and look match end to end — the
LED under-shelf / cabinet light 2FS, the
LED under-shelf / cabinet light 3 ft and the
LED under-shelf / cabinet light 4F cover longer cabinet banks with the same selectable wattage and selectable CCT controls. The full technical PDF (LCFIX-CAB-120V-3CCT-1FT Spec Sheet) is in the Documentation tab, with the dimensional drawing, polar candela curve, ordering information and the complete list of supplied accessories.