LED LINEAR WORKSHOP FIXTURE 36W 46''

LED LINEAR WORKSHOP FIXTURE 36W 46''

SKU: LCFIX-PSHOP2-WH-B

Brand: LEDCO

Bright, honest light over the workbench changes everything — and that is exactly what this LED linear workshop fixture was built to deliver. Often called a shop light, a garage light or simply a linear LED lighting bar, it is a ready-to-hang integrated LED fixture that comes complete with hanging chain, power cord and pull switch, so you go from box to bright in a few minutes. It is the go-to answer for garages, basements, storage rooms, utility corners, laundry areas, sheds and small workshops where an old fluorescent strip used to hum and flicker. No tubes to replace, no ballast to fail — just a clean white bar of light that turns on the second you pull the chain.

This model (SKU LCFIX-PSHOP2-WH-B) runs on 36W at 120V and puts out 3200 lumens of crisp 5000K daylight-white light, the colour temperature most people want over tools, workbenches and parts bins because it keeps colours and details easy to read. The integrated LED source is rated for 50,000 hours of life, so it keeps working long after a fluorescent tube would have dimmed out. An angle diffuser spreads the output evenly instead of dropping one harsh hot spot on the floor, and the white metal structure with white diffuser keeps the whole thing discreet against a ceiling. It measures 46 ¾ in. (119 cm) long, 3 ¾ in. (9.5 cm) wide and 1 ⅝ in. (4 cm) high, with a 16 in. (40.6 cm) hanging chain included. Easy On/Off pull chain; this fixture is not dimmable. Compliant with CAN ICES-005 (B) / NMB-005 (B).

Hang it over a workbench, a car bay, a woodworking table, a furnace room or a cold storage shelf, and it earns its keep every single day. Contractors use these 4 ft shop lights in rows to light a whole garage or a small commercial back room; homeowners hang one over the laundry machines or the basement stairs landing. Because it ships with its own cord and chain, it is perfect for rental units, seasonal spaces and Canadian garages where you want light now without calling in an electrician for a hardwired run. Pair it with under-cabinet bars like the LED linear cabinet light 3CCT 4FT for finished work areas. Order yours and light up the shop properly.

56.97$


Built to hang and take a beating
The body of this LED shop light is white metal with a white diffuser, a simple combination that reflects light back down and blends into a garage or basement ceiling instead of standing out. The integrated LED means there are no tubes, no sockets and no ballast: the light engine, the driver and the housing are one sealed assembly, which is why these linear LED fixtures keep performing in dusty, cold or busy spaces where fluorescent strips degrade fast. The included 16 in. hanging chain and power cord let you suspend it at the height you actually need over a bench, and the pull switch puts control right where your hand is.

Light quality that shows the work
With 3200 lumens at 5000K, this fixture gives a bright daylight-white output that makes grain lines, wire colours, fasteners and paint finishes easy to read. The angle diffuser is the detail that matters most here: instead of firing a narrow beam straight down, it spreads the output across the work surface, softening shadows over a bench or a car hood. At 36W, you get that output while drawing a fraction of what an old halogen or multi-tube fluorescent setup pulled — integrated LED lighting commonly cuts consumption dramatically compared to legacy sources, and the 50,000 hour rated lifespan means very few trips up the ladder.

Technical specifications
SKU: LCFIX-PSHOP2-WH-B
Light source: Integrated LED
Power: 36W
Voltage: 120V
Brightness: 3200 lumens
Colour temperature: 5000K
Lifespan: 50,000 hrs
Structure: White metal
Diffuser: White
Length: 46 ¾ in. / 119 cm
Width: 3 ¾ in. / 9.5 cm
Height: 1 ⅝ in. / 4 cm
Hanging chain: 16 in. / 40.6 cm
Dimming: Not dimmable
Control: On/Off pull chain
Compliance: CAN ICES-005 (B) / NMB-005 (B)

Installation and compatibility
Installation is about as simple as lighting gets: anchor a hook into a joist or ceiling, hang the fixture on its 16 in. chain, plug the power cord into a nearby 120V outlet and pull the chain. No driver to mount, no remote transformer, no dimmer to match — and since the fixture is not dimmable, do not wire it to a dimmer switch or put it on a dimming circuit. For continuous coverage in a two-car garage or a long basement, plan your fixtures in a row spaced evenly over the work zones rather than one central unit, and keep each one within reach of an outlet or a properly rated extension setup. For task areas that need a finished, tucked-away look — under cabinets, over a counter, inside a closet — the slim bars of the same family are the natural companions: the LED linear cabinet light 3CCT 1FT, the LED linear cabinet light 3CCT 3FT and the LEDBAR CCT 34 in..

Where it works and what is documented
Homeowners hang these over a workbench, a laundry pair, a utility sink or a basement storage aisle. Contractors and small businesses use them in mechanical rooms, back shops, stockrooms, warehouse mezzanines and job trailers, where a plug-in 4 ft shop light gets a space usable immediately. In Canadian garages and unheated sheds, the integrated LED starts instantly at low temperatures — no warm-up flicker like a cold fluorescent tube. Full details, dimensions and performance values are in the technical PDF (LCFIX-PSHOP2-WH-B Spec Sheet) available in the Documentation tab of this page; download it before you plan your layout or quote a multi-fixture job.
Top