FINISHING END CAP #13 – 1 UNIT

Name: FINISHING END CAP #13 – 1 UNIT
Brand: LEDCO
SKU: LCENDCAP-STAND-13
Price: 3.97 CAD
Availability: InStock

SKU: LCENDCAP-STAND-13

Brand: LEDCO

Nothing gives away a rushed job faster than an open, raw-cut aluminum profile at the end of a beautiful strip light run. That is exactly what this finishing end cap is here to fix. Sold as 1 unit, it is the small closure accessory — what people search for as LED channel end caps, LED strip light end caps, extrusion caps or profile end plugs — that snaps onto the open end of an aluminum LED channel once your tape light is cut to length and seated in the extrusion. Instead of a cut-off piece of metal staring back at you, the profile reads as one clean, continuous, deliberate line. It is the finishing touch on under-cabinet lighting, closet and pantry runs, shelving, display cases, cove lighting, stair nosings and millwork details.

This cap is designed to sit flush with the channel so the transition from profile to cap is smooth to the eye and to the hand. It holds its shape over time and stands up to the everyday knocks that come with cabinetry, millwork and retail display installations, which is why it is a favourite of cabinetmakers and finishing carpenters. It also does a second job that most people only discover later: it keeps the diffuser lens from creeping or sliding out of its track once the run is mounted, so your light line stays tight and even. Remember that end caps are profile-specific — match the cap to the shape and size of the extrusion you are actually using, and plan on two caps per run (or one solid and one pre-drilled when a power lead has to exit one side).

Order SKU LCENDCAP-STAND-13 for kitchens, bathrooms, home offices, basements, boutiques, bars, reception desks and display fixtures — anywhere a Canadian renovation or commercial build calls for a tidy, professional light line. This cap is made for the standard aluminum LED channel family; if you are finishing flexible neon runs instead, look at the Flex neon endcap 3x6 (without hole) or the Flex neon endcap 6x6 (with hole), and for a different standard profile see the Finishing end cap #11 (no hole). Add a few spares to your order and finish every run right the first time.

Compatible with
Works with:
Channel / profile: LCPROF-13-8FT

What this end cap actually does
An aluminum LED channel is only as good as the way it ends. This finishing end cap is a closure accessory that covers the exposed opening of the extrusion after the profile has been cut and the LED strip has been seated inside. Sold individually (1 unit), it lets you buy exactly the quantity your project needs — most installers plan two per run, and keep a handful of spares in the truck for the inevitable recut. Beyond looks, the cap performs a mechanical role: it caps the channel cavity, protects the cut edge, and helps keep the diffuser lens seated in its track so the lens cannot slide out once the run is mounted overhead or under a cabinet.

Fit and compatibility
End caps are profile-specific, so the cap must match the cross-section of the extrusion you are using. Across a channel system there are several profile styles and sizes, and caps are typically offered in both solid and pre-drilled versions: the pre-drilled one lets the power lead exit cleanly on one side while the solid cap fully closes the opposite end. That pairing is the standard way to wire a run without a visible gap or a wire pinched against bare aluminum. If your project uses flexible neon rope instead of a rigid profile, the neon family is a separate fit — see the Flex neon endcap side view (without hole) and the Flex neon endcap top view (without hole). For another standard profile size, the Finishing end cap #11 (with hole) covers the drilled version of its shape.

Installation, step by step
Dry-fit everything before you commit: slide the channel, the lens and both caps together on the bench to confirm the assembly reads flush. Cut the extrusion square — a mitre saw with a fine-tooth blade works well — then lightly deburr the cut edge with a file if the fit feels very snug, since a burr is almost always the reason a cap refuses to seat. Press the cap on with steady, even pressure rather than hammering it. For high-traffic areas, overhead coves or anywhere a ladder is needed for service, a small dab of adhesive on the inside face of the cap keeps it permanently secure. Where the power lead exits, pass the wire through the drilled cap before final mounting so you are not fighting the connection inside a finished cabinet.

Technical specifications
SKU: LCENDCAP-STAND-13
Type: Finishing end cap for aluminum LED channel
Quantity: 1 unit
Style: Standard profile #13
Function: Closes the exposed end of the extrusion and helps retain the diffuser lens
Category: End Caps, Lenses & Accessories

Where it earns its keep
Think kitchen under-cabinet lighting where the run stops at the edge of an island, closet and pantry shelving, cove and ceiling perimeter details, display cases and retail shelving, bar fronts, reception desks, stair and hallway accent lines, and garage or workshop task lighting. In renovation work across Canada, these little caps are what separate a strip glued under a shelf from a finished architectural light line — and they are just as important on commercial installs, where a client's eye always lands on the end of the run. No spec sheet, IES file or installation video is listed for this accessory; refer to the specifications of the aluminum channel and LED strip you are pairing it with, and match the cap to that profile before ordering.