FINISHING END CAP #94 (ALUMINUM) – 1 UNIT

Name: FINISHING END CAP #94 (ALUMINUM) – 1 UNIT
Brand: LEDCO
SKU: LCENDCAP-STAND-94
Price: 18.97 CAD
Availability: InStock

SKU: LCENDCAP-STAND-94

Brand: LEDCO

Give your LED channel a clean, finished edge instead of a raw open end. The FINISHING END CAP #94 (ALUMINUM) is the small part that makes a big visual difference on any aluminum channel for LED strip lighting — also searched as an aluminum extrusion end cap, profile end cap or channel cap. It closes off the opening at the end of your extruded aluminum profile so the tape light inside stays protected from dust, lint and insects, and so the finished run looks like a factory-made fixture rather than a cut piece of metal. Sold as 1 unit, it's the finishing touch for under-cabinet lighting, cove and ceiling details, stair nosings, closet and pantry strips, shelf lighting, baseboard details and display cases.

Machined from durable aluminum rather than plastic, this cap resists knocks and keeps its shape over time — exactly what you want in a busy kitchen, a garage workbench, a shop counter or a workshop where things get bumped. It also shields the LED strip and any soldered connections sitting near the cut end of the profile, which is usually the most fragile spot of a custom-length run. End caps are profile-specific: this one is the #94 style, so pair it with the matching #94 extrusion for a flush, gap-free fit with no daylight showing through the seam. SKU LCENDCAP-STAND-94.

Caps are normally used in pairs: one fully closed at the far end of the run, and one with an opening at the wiring end so the power lead passes through neatly, keeping the cable concealed and strain-free instead of leaving an exposed connection on display. If you're working with a different profile family, the matching caps are here too — the Finishing end cap #11 (no hole) and the Finishing end cap #11 (with hole) for the #11 extrusion, and the Flex neon endcap 6X6 (without hole) for flexible neon rope. Add a couple to every channel order and finish your job right the first time.

Compatible with
Works with:
Channel / profile: LCPROF-94-16FT, LCPROF-94-8FT

Why an end cap matters
An aluminum channel left open at the ends simply looks unfinished. Worse, that opening is an invitation: dust, lint, sawdust and insects work their way inside and settle right on the LED strip, dulling the light output and creating shadows you can see through the diffuser. This finishing end cap seals the opening, giving your aluminum profile a tidy, factory-finished edge while protecting the tape light and any soldered connections near the cut. On custom-length runs — and almost every run is custom — the cut end is where the strip is most vulnerable, so capping it is cheap insurance for the whole installation.

Aluminum construction
This cap is machined from durable aluminum rather than moulded plastic. That means it resists knocks, doesn't go brittle or yellow, and holds its shape over the years — a real advantage in busy kitchens, retail counters, shops and workshops where cabinet doors, tools and carts find every exposed corner. Because it's the same material family as the extrusion itself, the visual transition between profile and cap reads as one continuous piece rather than an add-on, which is exactly the look designers and cabinetmakers are after on under-cabinet lighting and open shelving.

Technical specifications
SKU: LCENDCAP-STAND-94
Type: Finishing end cap for LED aluminum channel
Profile style: #94
Material: Aluminum
Quantity: 1 unit
Category: End Caps, Lenses & Acc.

Compatibility and pairing
End caps are profile-specific, so always match the cap to the extrusion you are using. Several profile styles exist in the catalogue and choosing the matching cap is what guarantees a flush, gap-free fit; this unit is made for the #94 aluminum extrusion. Caps are generally used in pairs — one fully closed at the far end, and one with an opening at the wiring end so the power lead can pass through neatly, keeping the cable concealed and strain-free and avoiding an unsightly exposed connection. Since this cap is sold individually, order the quantity your layout actually needs: two per continuous run, or more when a long installation is broken into several segments around corners and appliance gaps. For other systems, see the Finishing end cap #11 (no hole), the Finishing end cap #11 (with hole), and for flexible neon, the Flex neon endcap 3X6 (with hole) or the Flex neon endcap side view (without hole).

Installation tip and applications
Dry-fit the cap before mounting the channel. Press it firmly into the extrusion; if you want a permanent hold, add a small dab of adhesive inside the cap rather than on the profile face, so the finish stays clean and the cap can still be removed later for service. Plan the wiring end first — decide which side the driver sits on, run the lead through the opened cap, then close the far end. In the field, that translates into kitchen valances and toe-kicks, bathroom vanity lighting, closet and pantry shelves, stair and hallway cove details, garage and workshop benches, office reception desks, restaurant bars and retail display cases across Canada. No spec sheet is listed for this accessory: the fit is determined by the profile style, so confirm you're ordering the #94 version before you cut your channel.