FINISHING END CAP #94 (WHITE) – 1 UNIT

Name: FINISHING END CAP #94 (WHITE) – 1 UNIT
Brand: LEDCO
SKU: LCENDCAP-STAND-94-WH
Price: 14.97 CAD
Availability: InStock

SKU: LCENDCAP-STAND-94-WH

Brand: LEDCO

Every clean LED strip installation ends the same way: with a tidy, finished edge. That's exactly what the FINISHING END CAP #94 (WHITE) does. Sold as 1 unit, this small white accessory closes off the open end of an aluminum LED channel so your profile looks like a real, factory-finished luminaire instead of a cut-off piece of extrusion. People search for it under many names — LED channel end caps, LED strip light end caps, profile caps, aluminum extrusion caps, even neon end caps — but the job is always the same: cover the raw cut, hide the strip and the lens edge, and keep dust, fingers and curious little hands out of the channel. It's the finishing touch on under-cabinet lighting, cove and ceiling coves, closet shelving, staircase nosings, display cases, retail shelving, garage workbenches and every other place where a LED strip runs inside a profile.

This is the #94 profile-specific cap in a white finish, designed to match the end shape of its corresponding aluminum channel so it seats flush and stays put. Because each channel family has its own cross-section, end caps are not interchangeable from one number to another — the #94 cap pairs with the #94 channel, just as the #11, #12, #13, #14 and #15 caps pair with theirs. Ordered individually, so you buy exactly what your job needs: one per open end, two for a channel finished on both sides, or a handful extra in the toolbox for the next call-back. The white colour blends into white ceilings, white millwork, white shelving and painted drywall returns, which keeps the eye on the light and not on the hardware. SKU: LCENDCAP-STAND-94-WH.

Homeowners renovating a kitchen, cabinetmakers wrapping up a millwork package, electricians finishing a commercial cove, retailers lighting a display wall — everyone needs these little pieces, and running out of them is what stalls a job on a Friday afternoon. Across Canada, from basement renos to storefronts, a proper end cap is also what keeps sawdust and drywall dust from settling on the strip inside the channel. Working with other profiles on the same site? You'll also find the matching finishing end caps for other channel numbers, such as the Finishing end cap #13 and the Finishing end cap #15. Add the #94 caps to your order and finish the run right the first time.

Compatible with
Works with:
Channel / profile: LCPROF-94-16FT-WH, LCPROF-94-8FT-WH

What this accessory is
The FINISHING END CAP #94 (WHITE) is a replacement or completion part for aluminum LED channel systems. It slips onto the cut end of the extrusion and closes the opening left by the strip cavity and the diffuser lens. Sold as a single unit (1 unit), it lets you order the exact count your layout calls for instead of being stuck with a fixed kit quantity. On a typical run you'll use two caps per continuous length — one at each open end — while a run that dies into a wall, a cabinet gable or another profile may only need one.

Why the number matters
End caps are profile-specific. The #94 designation identifies the channel cross-section this cap was shaped for, so it follows the exact outline of that extrusion and sits flush against the aluminum. A cap from a different family — #11, #12, #13, #14 or #15 — will not seat correctly on a #94 profile, and vice versa. If you're ordering for several profiles on the same jobsite, note each channel number before you order, and check whether you need a solid cap or a version with a hole for the power lead. On the #94, plan your wire exit at the end where the driver or connector lands, or bring the low-voltage feed out through the back or side of the profile before capping the end.

Technical specifications
SKU: LCENDCAP-STAND-94-WH
Product: Finishing end cap #94
Colour / finish: White
Quantity: 1 unit
Compatibility: #94 aluminum LED channel profile
Category: End caps, lenses and accessories

Installation tips
Cut your profile to length first, deburr the cut with a file or fine sandpaper so the cap seats square, then dry-fit the cap before the strip goes in. Install the LED strip, run and test your low-voltage connections, snap the diffuser lens in place, and finish with the caps last so the lens edge is captured. On ceilings and under-cabinet work, a small dab of clear silicone or adhesive inside the cap keeps it from working loose over time with vibration or when the lens is removed for service — but leave at least one end friction-fit only if you expect to service the strip later. A white cap against white melamine, painted MDF or a white ceiling reads almost invisible, which is exactly the look most clients are after.

Where it gets used, and what goes with it
Kitchen under-cabinet and toe-kick lighting, bathroom vanity and mirror surrounds, cove lighting in living rooms and condo hallways, closet and pantry shelving, stair and corridor accent runs, plus commercial work: retail display cases, reception desks, bar fronts, office cove details and shop workbenches. Canadian renovation projects often mix several profile shapes in one home — recessed channels in the ceiling, surface channels under cabinets, corner channels on shelving — so keep the right caps on hand for each. For the other profiles in the same family, see the Finishing end cap #11 (no hole), the Finishing end cap #12 (with hole) and the Finishing end cap #14 (no hole). No spec sheet is published for this accessory; if you're unsure which number matches your extrusion, compare the profile shape before ordering.