Built to disappear into the ceilingThe LUNA Designer Series was evolved to be a flexible, low-glare and aesthetically pleasing luminaire, and RA35-12RG-90BK shows it. The housing is a durable
airtight aluminum body with an adjustable regressed gimbal, and an anodized blue heat sink provides maximum airflow for the LED light source — the kind of thermal design that protects lumen output over the long haul. The black trim finish reads as a clean dark aperture in a white ceiling, which is exactly why designers specify it over shiny reflectors. The fixture measures 4 3/8" (111 mm) and 3 3/8" (85 mm) across the visible profile, with a 4 3/16" (106 mm) / 3 1/16" (78 mm) body and a 15/16" (34 mm) depth detail, for a
recessed downlight that stays discreet.
Light quality you can seeThis general application light fixture features an LED module that maintains uniform intensity producing
up to 1160 lumens, with a typical
CRI of 95+. The on-fixture colour selectable switch — a 5CCT system, meaning five selectable colour temperatures — moves between
2700 K, 3000 K, 3500 K, 4000 K and 5000 K, so you can warm up a den or cool down a workspace without reordering. At 12W the output reads 1040 lm at 2700 K, 1090 lm at 3000 K, 1135 lm at 3500 K, 1160 lm at 4000 K and 1145 lm at 5000 K. The lens delivers a
38° beam spread and the gimbal tilts up to 40°, ideal for accenting rather than flooding.
Technical specificationsSKU: RA35-12RG-90BK
Brand: LITELINE
Application: Ceiling Recess Mount
Approved location: Wet / Insulated Ceilings
Wattage: 12W
Lumens: Up to 1160
Lumens per watt: Up to 102
CCT: 2700 K / 3000 K / 3500 K / 4000 K / 5000 K (colour selectable)
CRI: 95+
Beam angle: 38°
Tilt: 40°
Input: 100-135V AC, 50/60Hz
Dimming: Yes, 100%-10%, forward/reverse-phase TRIAC/ELV
Power factor: >0.90
Hole cut: Ø 3 5/8" (92 mm)
Operating temperature: -20°C ~ 40°C (-4°F ~ 104°F)
Projected life: 70% @ 50,000 hrs
Certification: cETLus, Energy Star, Class II
Warranty: Lifetime
Wiring and installationThe fixture ships with an extruded aluminum hardwire box housing a
12 watt (300mA) dimmable Class II electronic LED driver with 100-135V AC input, plus an 18" (457 mm) FT6 rated cable with DC 2.1 connector between driver and fixture, approved for use in plenums and suspended ceilings. Three
quick connect push-in terminals make wiring fast on site, and two spring-loaded clips attach the fixture to any ceiling material — no housing or can required. Cut a Ø 3 5/8" (92 mm) hole, push in, twist the gimbal into position and you are done. Dimming runs 100% to 10% on industry standard forward-phase / reverse-phase and TRIAC/ELV dimmers; contact the factory for the list of compatible dimmers.
Where it works and what pairs with itUse it over kitchen counters and islands, along hallways, in bedrooms and ensuites, on covered porches and soffits thanks to the wet location rating, and in retail, café, clinic and office ceilings where a low-glare
gimbal recessed light keeps the focus on the merchandise or the millwork. The airtight build and insulation-contact approval suit insulated Canadian ceilings and air barrier requirements. Within the same family you can mix apertures and finishes: the
brushed nickel version, the
white version, the dim-to-warm
RA35-12RG-DTW90BK, or the fixed
3.5" LUNA LED round recessed fixture in black for general ambient zones. Accessories such as pre-mounting plates, new construction plates, vapour barrier extenders and reducer rings for 3 1/2" LUNA fixtures are sold separately. The full
technical spec sheet is available in the Documentation tab for dimensions, ordering codes and installation details.