5W DIMMABLE GU10 MR16 E27 SMD LED LIGHT BULBS

Name: 5W DIMMABLE GU10 MR16 E27 SMD LED LIGHT BULBS
Brand: LED MONTREAL
SKU: 5WLEDSMD
Price: 9.97 CAD
Availability: InStock

SKU: 5WLEDSMD

Brand: LED MONTREAL

Swap a hot, power-hungry halogen for something brighter to live with: the 5W Dimmable GU10 MR16 E27 SMD LED Light Bulbs from LED MONTREAL. People look for these under a lot of names — GU10 LED, gu 10 led bulbs, MR16 12V spot, E27 screw-in bulb, dimmable LED downlight bulb or simply "ampoule LED" — and they all point to the same idea: a compact SMD LED lamp that drops straight into the fixtures you already own. Choose the socket that matches your setup (GU10 twist-lock, MR16 with two pins on 12V, or E27 medium screw base), and you have a direct, no-drama replacement for a standard 40–50W halogen. Their small body slips into most standard open retrofit fixtures and track lights, which makes them a favourite for recessed pot lights, accent spots, display heads and pendants that need a real light source, not a compromise.

Each bulb draws only 5W and is dimmable from 10% to 100%, so you can go from bright working light down to a soft glow on the same circuit. Warm White at 3000K delivers 280 lumens for that cozy, halogen-like feel, while Cool White at 6000K delivers 330 lumens for a crisp, energetic look. The 120° beam angle spreads light wide and flood-like instead of punching a hard spot on the floor, and the aluminum casing with Epistar LED chips keeps things cool and steady over a 35,000-hour lifetime. Input voltage is 110-120V for the E27 and GU10 versions, and 12V for the MR16. Working temperature runs from -20 to 40°, with storage from -20 to 90°. They are rated for residential and commercial use, indoors, in a dry environment. SKU: 5WLEDSMD.

These bulbs earn their keep in kitchens, hallways, bedrooms, basements and home offices, and just as easily in boutiques, cafés, salons, clinics and small offices where track heads light up a display wall or a counter. In Canadian homes, where a ceiling can hold a dozen halogen pot lights running all evening, going to 5W each changes both the heat and the hydro bill — up to 80% less energy than halogen. Because the advertised configuration is for one bulb, it is easy to re-lamp a whole room at your own pace or keep a few on hand as spares. Pick your socket, pick your colour temperature, and get the light you actually want tonight.

Built to last, built to fit
The 5W SMD LED bulb is built around an aluminum casing that pulls heat away from the diodes — the single biggest factor in how long an LED lamp really lasts. Inside, the light comes from Epistar LED chips, a well-known SMD chip source, rated for a 35,000-hour lifetime. The compact format was designed to behave like the halogen it replaces, so it fits most standard open retrofit fixtures and track lights without the awkward overhang or the bulb that will not seat properly. Refer to the technical drawings in the spec sheet for the exact dimensions of each socket version before you order.

Light quality and dimming
Two colour temperatures are offered: Warm White 3000K at 280 lumens, the closest feel to the incandescent and halogen light most people grew up with, and Cool White 6000K at 330 lumens, a bright daylight-leaning white that keeps work areas and retail displays looking sharp. The 120° beam angle is the detail that surprises people the most: instead of a narrow cone, you get wide, flood-like coverage, which means fewer dark gaps between fixtures and softer shadows on a countertop or a display shelf. Dimming runs from 10% to 100%, so the same bulb handles supper prep and a quiet evening.

Technical specifications
SKU: 5WLEDSMD
Brand: LED MONTREAL
Housing: aluminum casing
Available sockets: E27, GU10, MR16
LED chip brand: Epistar
LED consumption: 5W
Good replacement for: 40-50W halogen
Dimmable: yes (10%-100%)
Input voltage: E27, GU10: 110-120V — MR16: 12V
Beam angle: 120°
CCT: Warm White 3000K, Cool White 6000K
Lumens: Warm White 280lm, Cool White 330lm
Working temperature: -20~40°
Storage temperature: -20~90°
Lifetime: 35,000 hours
Use: residential and commercial, indoor, dry environment
Dimensions: see technical drawings

Electrical and installation notes
Start by identifying your socket. GU10 has two thick pins you push in and twist a quarter-turn, and runs on line voltage 110-120V. E27 is the medium screw base, also 110-120V, common in pendants, table lamps and some ceiling fixtures. MR16 has two thin pins and runs on 12V, which means it needs a low-voltage transformer or driver upstream — never wire an MR16 lamp directly to line voltage. For dimming, put the bulbs on a dimmer rated for LED loads and keep in mind that a single 5W lamp is a very small load; grouping several bulbs on the same dimmer usually gives the smoothest result. Because these lamps are rated for indoor, dry locations, keep them out of unprotected outdoor fixtures, open soffits and shower enclosures.

Where they work best, and what to read
Think kitchen pot lights over an island, a hallway line of recessed spots, track heads aimed at artwork in a living room, bedside pendants with E27 sockets, or 12V MR16 heads in a display case or a millwork valance. On the commercial side, they suit boutiques, cafés, hair salons, waiting rooms and small offices where the fixtures are already installed and only the lamps need to be modernized. Mixing 3000K in lounge areas with 6000K over work surfaces is a simple trick that makes a space feel designed rather than just lit. Full details, including the technical drawings for each socket version, are in the technical PDF available in the Documentation tab of this page — worth a look before you choose between GU10, MR16 and E27.

Technical Files