4 FEET 45 DEGREE ALUMINUM PROFILE FOR LED STRIP (LUX2200)

Name: 4 FEET 45 DEGREE ALUMINUM PROFILE FOR LED STRIP (LUX2200)
Brand: LED MONTREAL
SKU: 4LUX2200
Price: 34.97 CAD
Availability: InStock

SKU: 4LUX2200

Brand: LED MONTREAL

Give your LED strip lights the clean, built-in look they deserve with the 4 FEET 45 DEGREE ALUMINUM PROFILE FOR LED STRIP (LUX2200) from LED MONTREAL. Also called an aluminum extrusion, LED channel, extruded aluminum track or simply a profile for LED strip lighting, this corner-style housing is designed to be mounted at a 45-degree angle so the light is thrown exactly where you want it: down a wall, across a countertop, along a staircase or under a cabinet. Instead of a bare strip stuck to a surface with visible diodes, wires and adhesive, you get a crisp, finished line of light that looks like it was planned from day one. It is the piece that turns a good strip light project into a professional one.

This is a surface-mount 45° profile measuring 4 feet (1.22 m) in length, 19 mm wide and 19 mm high, machined from aluminum so it stays straight, rigid and easy to cut to size on site. Its corner geometry does two important jobs: the 45 degree angle spreads the LED light over a broader radius for smoother, more even coverage, and the aluminum body pulls heat away from the tape, which is exactly what your diodes need to keep their brightness and colour stable over time. The channel accepts IP20, IP65 or IP67 strips, so you can use the same look indoors or outdoors. Model 4LUX2200 can be held in place with optional aluminum clips or with our sturdy double-sided tape, and matching end caps finish each run neatly. Caps and clips are multiplied by the number of bars ordered — choose 2 closed caps with 5 bars and you receive 10 closed caps.

Canadian homeowners and contractors reach for this aluminum LED profile for kitchen cabinets and islands, cove and ceiling details, staircases, closets, garages, workshops, bars, retail displays, reception desks and covered patios or soffits where a weatherproof strip is used. It works with LED strips up to the channel's width, and for longer runs you can continue the same look with the 8 feet 45 degree aluminum profile for LED strip (LUX2200). Plan your lengths, add your caps and clips, and give your installation that finished, custom-built touch.

Built to hold a strip straight, for years
The LUX2200 is an extruded aluminum channel shaped as a 45-degree corner profile, made to sit in an inside corner or against an edge and aim the light outward at an angle. Aluminum is the material of choice here for two reasons: it does not sag, twist or yellow the way plastic mounting solutions can, and it acts as a heat sink for the LED strip bonded inside it. Heat is the number one enemy of LED tape — the cooler the strip runs, the longer it holds its output and its colour. A 4-foot bar is also easy to handle, easy to transport and easy to cut down with a mitre saw or hacksaw when a cabinet or a step calls for a custom length.

Technical specifications
Model: 4LUX2200
Type: 45° (Surface)
Length: 4 Feet (1.22 m)
Width: 19 mm
Height: 19 mm
Brand: LED MONTREAL
Use: Interior and exterior
Strips accepted: IP20, IP65 or IP67

Light quality and beam control
Mounting a strip flat against a surface often creates hot spots, glare straight into the eye and a harsh line of visible diodes. The 45-degree geometry of this aluminum extrusion tilts the tape so the light leaves at an angle, covering a broader radius and washing surfaces more evenly. Under a kitchen cabinet, that means light landing on the counter instead of bouncing off a backsplash into your face. In a cove or on a staircase, it means a soft, continuous band of illumination rather than a dotted line. Paired with a diffuser-style installation and a quality strip, the result reads as architectural lighting, not as a temporary add-on.

Installation, mounting and accessories
Installation is straightforward and needs no electrician for the profile itself. Cut the bar to length, clean the mounting surface, then fix the channel with the optional aluminum clips screwed into the substrate or with our sturdy double-sided tape for lighter and quicker jobs. Feed the strip into the channel, keep your solder points and connectors just outside the run, and close the ends with matching end caps — closed caps for a finished end, open caps where the wire exits. Remember that the quantity of caps and clips you select is multiplied by the number of bars ordered, so a 5-bar order with 2 closed caps ships 10 closed caps. Because the LUX2200 is rated for interior and exterior use, the same profile can run from an indoor cabinet out to a covered soffit as long as you choose an IP65 or IP67 strip for the outdoor section.

Applications and documentation
Residential projects love it for kitchens, islands, pantries, bathrooms vanities, closets, home theatres, staircases and basement coves; contractors and small businesses use it for retail shelving, display cases, bar fronts, reception desks, restaurant millwork, workshops and garages. For runs longer than four feet, order multiple bars and butt them end to end, or step up to the 8 feet 45 degree aluminum profile for LED strip (LUX2200) to reduce the number of joints on long walls and ceilings. The technical PDF for the 4 FOOT INTERIOR AND EXTERIOR 45 DEGREE ALUMINUM PROFILE FOR LED STRIP is available in the Documentation tab with the dimensions you need to plan your layout before you cut.

Technical Files