12V IP65+ LED STRIP KIT FOR SHOWER NICHE - 1.2M WITH LUX745 PROFILE

Name: 12V IP65+ LED STRIP KIT FOR SHOWER NICHE - 1.2M WITH LUX745 PROFILE
Brand: LED MONTREAL
SKU: 745KIT-4000
Price: 75.97 CAD
Availability: InStock

SKU: 745KIT-4000

Brand: LED MONTREAL

Turn a plain shower niche into the best-looking corner of the bathroom. This 12V IP65+ LED strip kit for shower niche from LED MONTREAL (SKU 745KIT-4000) bundles everything you need for a clean line of recessed light inside a shampoo nook, a bench alcove or a tiled shelf. If you have been shopping for LED strip lights, led strip lighting or a 4' led strip light that actually survives a wet, steamy room, this is the complete answer: strip, aluminum channel and opal lens, ready to recess into the tile work. It is also a favourite for niches above tubs, powder-room mirrors, display alcoves and any tight spot where a bulky fixture simply will not fit.

The kit assembles up to 1.22 m (4 feet) of continuous recessed LED lighting and runs on safe low-voltage 12V, which is exactly what you want near water. The high-density 120 LED/m strip works with the opaline lens of the LUX745 aluminum profile to spread a smooth, even glow with no hot spots and no dotting along the grout line. It carries an IP65+ rating against splashes and humidity, and the strip can be cut every 3 LEDs so you can size it to the exact width or height of your niche. This SKU is supplied in 4000K-4500K Natural White, the crisp, clean tone that keeps tile, stone and chrome looking true — the same family is also offered in warm white (3000K) and daylight white (5000K). White finish only, made for both residential and commercial projects.

Contractors across Canada reach for this kit on bathroom renovations, condo builds, hotel suites, spas, gyms and clinic washrooms — anywhere a niche deserves a soft wash of light instead of a shadow. It is built around the 8 feet recessed aluminum U shape profile for LED strip (LUX745), so extra profile lengths for longer runs or additional niches are easy to add to the same job. Plan your niche depth before tiling, run the low-voltage cable to a dry location, and you are set. Give your shower the detail everyone notices — order the shower niche LED kit today.

Built for the tile, built for the steam
This kit exists because a shower niche is a tough place to light. Everything sits behind tile, gets splashed daily and lives in humidity. The answer is a low-profile recessed aluminum channel with an opaline lens, holding a high-density strip rated IP65+. The aluminum body of the LUX745 profile tucks into the tile assembly and becomes part of the finish, while the diffuser hides the diodes completely. The result reads as a line of light, not a row of dots — the detail that makes a bathroom look designed rather than decorated.

Light quality without hot spots
The 120 LED/m strip places the diodes close enough together that, combined with the opal lens, the beam blends into one continuous glow. That density matters in a niche: the strip is often only a few centimetres from the shampoo bottles and the tile face, and a low-density strip would throw visible scallops and bright spots. This SKU ships in 4000K-4500K Natural White, a neutral tone that renders white tile as white, keeps grey porcelain from going yellow and flatters chrome and brushed nickel. The same kit family is also produced in warm white (3000K) for a cosier spa feel and daylight white (5000K) for a brighter, crisper look.

Technical specifications
SKU: 745KIT-4000
Brand: LED MONTREAL
Voltage: 12V
Colour temperature: 4000K-4500K Natural White
LED density: 120 LED/m
Maximum length: 1.22 m (4 feet) of continuous recessed lighting
Cutting interval: every 3 LEDs
Protection rating: IP65+
Profile included: LUX745 recessed aluminum U shape profile with opaline lens
Finish: white
Use: residential and commercial projects

Installation and electrical notes
Because the system runs on 12V low voltage, the strip itself carries no line voltage inside the wet area — a real advantage in a shower. Plan the profile location with your tile setter before the membrane and tile go up, leave a channel for the cable, and bring the low-voltage feed back to a dry, accessible spot for the driver. Clean and dry the profile before seating the strip, cut only on the marked points every 3 LEDs, and seal the profile ends and tile joints with a quality silicone so water never migrates behind the channel. Keep the run within the 1.22 m (4 feet) the kit provides; for a longer niche or a second niche, add profile from the same LUX745 family.

Where it works and what goes with it
Shower niches and shampoo shelves are the obvious home, but installers also use this LED strip kit under floating vanities, inside tub surrounds, in steam-room benches, in hotel and condo bathrooms, spa treatment rooms, gym showers and clinic washrooms. The matching channel is the 8 feet recessed aluminum U shape profile for LED strip (LUX745), ideal when you need extra length on the same project or a matching detail elsewhere in the room. The technical PDF for this kit is available in the Documentation tab — download it before you order your tile so the niche framing and profile depth line up on the first try.

Technical Files