STARTER KIT – 5M RGBW LED STRIP (3000K)

Name: STARTER KIT – 5M RGBW LED STRIP (3000K)
Brand: LEDCO
SKU: LCKIT-45W-RGBW-30K-IP22-5M
Price: 106.97 CAD
Availability: InStock

SKU: LCKIT-45W-RGBW-30K-IP22-5M

Brand: LEDCO

Colour when you want the mood, warm white when you need real light — this starter kit with 5M RGBW LED strip (3000K) gives you both on a single flexible tape. Often searched as LED strip lights, LED light strips, LED strip lighting or simply LED tape, this kit combines colour-changing diodes and dedicated warm white diodes on the same circuit board, so one run can go from a saturated blue movie night to a clean, cozy glow for reading, cooking or working. Everything you need is in the box: the strip, the power supply and the controller, so there is no guessing about which parts go together. It is the easy way to add indoor LED lighting under cabinets, along a ceiling cove, behind a TV, under a floating vanity or around a bar, whether you are a homeowner finishing a basement or a contractor dressing up a client's showroom.

The kit is built around a 5 m RGBW LED tape rated at 45 W, with an IP22 rating for indoor use and a warm 3000K white channel alongside the red, green and blue diodes. The strip is dimmable and is controlled entirely through the included controller: colour, brightness and scenes are adjusted without adding a wall dimmer or swapping fixtures, and many controllers let you blend colour with the warm white channel for softer pastel tones. The adhesive backing sticks directly to a clean, dry surface, and the tape cuts only at the marked cut points, so you can trim a run to fit a shelf or a cabinet without wasting the rest. SKU LCKIT-45W-RGBW-30K-IP22-5M.

This 5 m kit is the right length for a kitchen island, a single run of upper cabinets, a bedroom headboard wall, a staircase or a retail display case, and it shines just as well in homes, shops, hotels and offices across Canada. Because it is rated IP22, keep it indoors unless you are using a product specifically rated for damp or wet locations. Need more coverage? The same system is offered in longer versions: Starter kit 10M RGBW LED strip (3000K), Starter kit 15M RGBW LED strip and Starter kit 20M RGBW LED strip. Plan your layout, keep the power supply accessible, and light up your space tonight.

One strip, two jobs
What makes an RGBW LED strip different from a basic colour tape is the fourth diode. Instead of mixing red, green and blue to fake a white, this strip carries dedicated 3000K warm white diodes right beside the colour diodes on the same flexible circuit board. The result: real, usable warm white for task and accent lighting, plus full colour for ambiance and scenes — and, with many controllers, the ability to blend the two channels for softer pastel tones that a plain RGB tape simply cannot produce. That is why RGBW is the go-to choice for living spaces where the lighting has to be pretty on Friday night and practical on Monday morning.

Technical specifications
SKU: LCKIT-45W-RGBW-30K-IP22-5M
Type: RGBW LED strip starter kit
Length: 5 m
Power: 45 W
Colour temperature (white channel): 3000K
Ingress protection: IP22
Dimming: dimmable, through the included controller
Included: LED strip, power supply, controller

Electrical and installation
Because the power supply and controller are included, the kit is ready to run out of the box — no cross-referencing drivers, connectors and receivers. Start by planning the layout before you peel anything: measure the run, decide where the power supply will live (it must stay accessible and ventilated), and confirm the controller will be within reach or within signal range. Clean and dry the mounting surface thoroughly so the adhesive backing grips; dust, grease and fresh paint are the usual reasons a tape lets go months later. Cut only at the marked cut points, never between them, and avoid sharp bends across the circuit board. A few test-fits with painter's tape before committing will save you a second trip to the job site.

Aluminum channels and a cleaner line of light
Running the tape inside an aluminum channel with a diffuser is the single best upgrade you can make. The diffuser hides the individual diodes so you see a smooth line of light instead of dots, the extrusion gives you a clean mounting edge on drywall, millwork or a shelf, and the aluminum acts as a heat sink. Better thermal management helps protect long-term performance and colour consistency, which matters even more on a colour-changing strip where the channels need to stay balanced. Surface-mount, recessed and corner profiles all work well depending on whether you are lighting a cove, a cabinet underside or a stair nosing.

Where it works, and the rest of the family
Think kitchen islands and toe kicks, bedroom headboards, home theatre risers, basement bars, gaming setups, retail display cases, reception desks, hotel corridors and restaurant banquettes. IP22 means indoor use is recommended: keep it out of the rain and away from direct water unless the product you choose is specifically rated for damp or wet locations. If 5 m is not enough for your project, the identical system comes as a 10M RGBW starter kit, a 15M RGBW starter kit or a 20M RGBW starter kit. For a bathroom project, the Shower niche kit with aluminum profile, LED strip and power supply shows how well a strip performs inside a profile. Questions about layout or cut lengths? Our team is happy to help you spec the run before you buy.