STARTER KIT – 15M RGBW LED STRIP (3000K)

Name: STARTER KIT – 15M RGBW LED STRIP (3000K)
Brand: LEDCO
SKU: LCKIT-45W-RGBW-30K-IP22-15M
Price: 254.97 CAD
Availability: InStock

SKU: LCKIT-45W-RGBW-30K-IP22-15M

Brand: LEDCO

Colour when you want it, warm white when you need it — all from one single run of tape. This 15M RGBW starter kit is the easy answer for anyone shopping LED strip lights who doesn't want to choose between fun and function. People call it RGBW LED strip lighting, colour-changing LED tape, or simply LED light strips, and this one combines colour-changing diodes with a dedicated 3000K warm white channel on the same flexible circuit board. Wash a wall in deep blue for a party, then switch to a soft, inviting white for reading, cooking or working — no second run of tape, no second power supply, no compromise. Because it ships as a complete starter kit with the control system included, it's a favourite for under-cabinet lighting, cove and tray ceilings, stair accents, bar fronts, display shelving, home theatres and basement renos.

Everything you need to get glowing comes in the box: 15 m of RGBW LED tape in 3000K warm white, plus the power supply and control system that handle scenes, dimming and smooth colour transitions. The flexible circuit board can be cut at the marked points and bent around corners, coves and curves, and the adhesive backing bonds to clean, dry surfaces. Expect high colour rendering in white mode, so wood grain, fabrics, paint colours and skin tones all look natural instead of washed out — and expect smooth, even illumination down the whole run rather than hot spots. Order the kit as SKU LCKIT-45W-RGBW-30K-IP22-15M when you need a longer continuous layout.

This kit is made for dry indoor locations: kitchens (above the cabinets, not in the splash zone), living rooms, bedrooms, offices, retail displays, restaurant bars, salon mirrors and finished basements. For bathrooms near water, backsplashes exposed to spray or any outdoor project, choose a wet-location rated product instead — a smart move in Canadian conditions where humidity and freeze-thaw are real. Working a smaller or bigger space? The same kit comes in Starter kit – 5m RGBW LED strip, Starter kit – 10m RGBW LED strip and Starter kit – 20m RGBW LED strip. Measure your run, add an aluminum channel with a diffuser, and start your project today.

Two light sources on one tape
What sets this kit apart from basic RGB LED strip products is the dedicated white channel. Standard colour tape creates "white" by mixing red, green and blue, which almost always looks cold, greenish or pinkish on walls and millwork. Here, separate 3000K warm white diodes sit on the same flexible circuit board as the colour diodes, so your everyday light is a genuine warm white and your accent light is full colour. You can run white only, colour only, or layer the two for tinted warm scenes — one run of RGBW LED tape, one power supply, one control system.

Construction and cutting
The tape is built on a flexible circuit board with an adhesive backing, designed to follow real architecture: inside corners of a cove, the curve of a bulkhead, the front edge of a floating shelf. Cut marks along the strip let you shorten a run to fit exactly, and the 15 m length gives you plenty of material for a whole floor of accent lighting or several shorter zones. For the best-looking result, install the strip inside an aluminum channel with a diffuser: the diffuser hides the individual diodes so you see a clean line of light instead of dots, the extrusion protects the tape from knocks and dust, and the aluminum acts as a heat sink — better thermal management helps preserve brightness and colour consistency over the life of the installation.

Technical specifications
SKU: LCKIT-45W-RGBW-30K-IP22-15M
Type: RGBW LED strip starter kit (colour-changing + dedicated white channel)
Length: 15 m
White colour temperature: 3000K warm white
Colour rendering: high CRI in white mode
Included: LED tape, power supply, control system
Control: scenes, dimming and colour transitions
Mounting: adhesive backing, cuttable at marked points
Location: dry indoor locations

Installation and electrical notes
Plan the layout before you peel anything. Measure the run, mark your cut points, and decide where the power supply will live — it needs to stay accessible in a ventilated spot, not buried behind sealed drywall or stuffed into an airtight cavity. Wipe the mounting surface with alcohol and let it dry so the adhesive bonds for the long haul; on rough, dusty or painted-yesterday surfaces, mechanical clips or an aluminum channel are the safer bet. Keep the controller within easy reach for programming, and leave a little slack at connection points so nothing pulls on the solder pads. As always in Canada, follow local electrical code requirements and have a licensed electrician handle any permanent connection to building wiring.

Applications and related kits
Homeowners use this kit for cove and tray ceilings, under-cabinet and toe-kick lighting, staircases, headboards, home bars and theatre rooms. Contractors like it for condo handover packages and basement finishing, while small businesses put it behind reception desks, along retail shelving, under bar counters and around salon mirrors — colour for the brand or the season, warm white for everyday service. Need a different run length? Compare the 5m RGBW starter kit, the 10m RGBW starter kit and the 20m RGBW starter kit. For a damp-area project, look instead at the Shower niche kit with aluminum profile, LED strip and power supply. Any documents published for this kit appear in the Documentation tab of this page.