STARTER KIT - 10M OF RGB-W LED STRIP (3000K)

Name: STARTER KIT - 10M OF RGB-W LED STRIP (3000K)
Brand: LEDCO
SKU: LCKIT-45W-RGBW-30K-IP22-10M
Price: 186.97 CAD
Availability: InStock

SKU: LCKIT-45W-RGBW-30K-IP22-10M

Brand: LEDCO

Colour when you want it, warm white when you need it — this 10M RGBW LED strip starter kit gives you both on a single flexible tape. If you have been shopping for LED light strips, RGB LED strips or indoor LED strip lights and you keep hesitating between a colour-changing tape and a clean white one, this kit settles the question: colour-mixing diodes and a dedicated 3000K warm white channel share the same circuit board, so one run does the work of two. Known as LED tape, LED ribbon or simply light strips, it is the go-to solution for cove lighting, under-cabinet lighting, toe kicks, stair nosings, headboards, display cases and bars — anywhere you want the glow without seeing the fixture.

The kit ships as a complete 10M RGB-W LED tape package with the control gear included, so colour scenes, brightness and transitions are adjusted right out of the box — no guessing about which controller to pair with which tape. Model LCKIT-45W-RGBW-30K-IP22-10M is rated IP22, which makes it an indoor, dry-location product, and the warm 3000K white channel delivers the cozy, living-room-friendly tone most homeowners are after when the party lights go off. The flexible strip is cut to length at the marked points, bends around corners and curves, and sticks to clean, dry surfaces with its adhesive backing. Its low profile tucks neatly into an aluminum channel or behind trim, and mounting it on aluminum or another metal surface helps the diodes run cool and last.

This is the kit Canadian homeowners reach for during basement renovations, bedroom ceiling coves and kitchen island overhangs, and the one contractors specify for retail shelving, restaurant bars, reception desks and salon displays. Ten metres covers a good-sized room perimeter; if your project is shorter or longer, the same tape is offered as a Starter kit – 5m RGBW LED strip (3000K), a Starter kit – 15m RGBW LED strip (3000K) or a Starter kit – 20m RGBW LED strip (3000K). Measure your run, pick your length and give the room a personality it can change on demand.

One tape, two jobs
An RGBW LED strip is not the same thing as a plain colour tape. Here, the red, green and blue colour-mixing diodes sit on the same flexible circuit board as a separate 3000K warm white channel, each driven independently. That matters because colour-mixed "white" from RGB alone always looks a little off — slightly pink, slightly blue, never restful. With a dedicated warm white channel, you get a genuine, comfortable white for reading, cooking and entertaining, then dial in saturated colour for a party, a holiday, a game night or a storefront display. One run, one power feed, two completely different moods, and no second strip to hide in the same cove.

Technical specifications
SKU: LCKIT-45W-RGBW-30K-IP22-10M
Type: RGB-W flexible LED strip starter kit
Length: 10 m
White channel colour temperature: 3000K (warm white)
Ingress protection: IP22 — indoor, dry locations
Control: colour scenes, brightness and transitions adjusted from the included control gear
Mounting: adhesive backing, cuttable at the marked points

Installation done right
Plan the full layout before you peel any adhesive — measure the run, mark where the tape will be cut, and decide where the feed enters. Wipe the mounting surface clean and dry first; dust and grease are the number one reason tape lets go months later. Keep the driver and the controller in an accessible, ventilated spot, never sealed inside a closed soffit you would have to demolish to service. Avoid sharp folds at corners: use corner connectors so the copper traces are not stressed. And always cut only at the marked cut points, otherwise the segment will not light. Mounting the tape on an aluminum profile or another metal surface is strongly recommended — it spreads heat, protects the diodes and gives the light a cleaner, more finished line.

Where it shines
In a home, think basement renovation perimeters, bedroom ceiling coves, kitchen toe kicks and upper-cabinet crowns, stair nosings, floating shelves, home bars and headboards. In light-commercial work, it earns its keep on retail shelving, restaurant and hotel bars, reception desks, salon mirrors and display cases where the merchandise needs colour one week and neutral warm white the next. Because this kit is rated IP22, keep it indoors and dry: for a bathroom splash zone, a covered patio or any exterior run, choose a wet-location rated strip instead of this one.

Choosing your length and companions
Ten metres suits a medium to large room perimeter or a long bar front. Shorter jobs — a single cabinet, a niche, a headboard — are better served by the Starter kit – 5m RGBW LED strip (3000K), while open-concept main floors and commercial runs often call for the Starter kit – 15m RGBW LED strip (3000K) or the Starter kit – 20m RGBW LED strip (3000K). For a damp-area project on the same principle, look at the Shower niche kit: aluminum profile + LED strip + power supply, which pairs a profile, a strip and its power supply in one package. Questions about layout or cut points? Our team is happy to walk through your plan before you order.