LED STRIP 23W/M (RGBW)

Name: LED STRIP 23W/M (RGBW)
Brand: LEDCO
SKU: LCLS24V-23W-RGBW-27K
Price: 123.97 CAD
Availability: InStock

SKU: LCLS24V-23W-RGBW-27K

Brand: LEDCO

Colour and comfort on the same tape: this RGBW LED strip gives you millions of vibrant colours plus a true white channel at 2700K, so one run of tape handles both the party and the everyday. Known as LED strip lighting, LED light strips, LED tape or simply strip lights, it is the flexible solution people reach for when they want cove lighting, under-cabinet lighting, toe-kick accents, backlit headboards, bar fronts, display cases, ceiling coves and colour-changing feature walls. Because the white LEDs are separate from the red, green and blue chips, you get a clean, warm white for reading and cooking — not a washed-out pastel mix — and the full colour range whenever you want it. SKU LCLS24V-23W-RGBW-27K.

This strip runs on 24V DC and draws 23W per metre (±10%), with 96 LEDs per metre for a dense, even line of light and fewer visible dots. The 120º beam angle spreads light smoothly across coves and cabinet interiors, while a CRI of 80+ keeps wood tones, paint colours and food looking natural. It is dimmable, so you can fine-tune the mood from full output down to a soft glow. The PCB measures 12 mm wide with a 3 oz copper build for better heat management over long runs, and the tape can be cut every 62.5 mm at the marked points. Maximum run length is 10 m, the rating is IP22 for indoor use, it is UL listed, and the rated lifespan is 50 000+ hours.

From a Montréal condo kitchen to a Calgary restaurant bar, a basement home theatre, a salon reception desk, retail shelving or a gym feature wall, this RGBW tape light does the heavy lifting where recessed fixtures can't reach. Pair it with a 24V DC driver and an RGBW controller sized to your total wattage, and mount it in an aluminum channel for a finished, heat-friendly installation. Need fixed white instead of colour for another zone of the same project? Look at the LED strip 20W/M 24V 100W IP22 (CCT) or the LED strip 24V 2835 4.8W/M IP22 (30K). Check the spec sheet in the Documentation tab and plan your run today.

Built for long, clean runs
This RGBW LED tape is built on a 12 mm wide flexible PCB with 3 oz copper, a heavier copper weight that helps pull heat away from the diodes and keeps colour and brightness consistent along the run. With 96 LEDs per metre, the red, green, blue and white chips sit close together, which softens the dotting effect you see on sparser tapes — especially useful in shallow coves, under cabinets and in any spot where the strip is seen at an angle. The tape can be cut at the marked points every 62.5 mm, so you can tailor each section to the exact cabinet, stair or ceiling detail without wasting material.

Real white, real colour
The big advantage of RGBW strip lighting over plain RGB is the dedicated white channel. Here it is a warm 2700K, the cozy tone most people want in living rooms, bedrooms, restaurants and hospitality spaces. Run the white alone for everyday functional light, run the colours alone for accent and mood, or mix them for pastel and tinted effects. With a CRI of 80+ on the white channel, finishes, textiles and skin tones stay natural, and the 120º beam angle spreads the output wide enough to wash a wall or fill a cove evenly.

Technical specifications
SKU: LCLS24V-23W-RGBW-27K
Colour: RGBW 2700K
LEDs per metre: 96 pcs
Power: 23W/M ±10%
Voltage: 24V DC
CRI: 80+
Beam angle: 120º
Dimmable: Yes
PCB width: 12 mm
PCB thickness: 3 oz.
Cut size: 62.5 mm
Maximum run length: 10 m
Protection rating: IP22
UL: Yes
Lifespan: 50 000+ hours

Electrical and installation notes
Low-voltage 24V DC operation makes this tape safe and simple to handle on site and lets you run longer lengths than a 12V product before voltage drop becomes an issue. Respect the 10 m maximum run per feed and calculate your power supply from the 23W per metre draw, leaving headroom on the driver. Because this is an RGBW product, you need a four-channel RGBW controller and five-conductor wiring between the controller and the tape; the strip is dimmable through that controller. Clean and dry the surface before applying the adhesive backing, avoid tight bends at the solder pads, and use an aluminum extrusion with a diffuser lens wherever the tape will be visible — it hides the diodes, protects the circuit and acts as a heat sink. The IP22 rating means indoor, dry locations only: coves, cabinets, millwork and ceilings, not exteriors or wet areas.

Where it works and what to pair it with
Think kitchen valances and toe-kicks, bathroom mirror surrounds in a dry zone, staircases, home theatres, basement bars, reception desks, retail display cases, restaurant banquettes, gyms and event venues — anywhere a colour scene at night and a warm white for daily use both make sense. For projects that mix colour zones and static white zones, the LED strip 14.4W/M 24V 72W (RGB) IP22 covers pure colour accents, while the LED strip 17W/M 24V 2440K IP22 (dim to warm) is a great choice for residential living spaces. For damp or outdoor-adjacent locations, the same family offers IP66 versions such as the LED strip 19.2W/M 24V 96W 30K IP66. The full technical PDF is available in the Documentation tab for your wiring layout and submittals.

Technical Files