STARTER KIT – 20M RGBW LED STRIP (3000K)

Name: STARTER KIT – 20M RGBW LED STRIP (3000K)
Brand: LEDCO
SKU: LCKIT-45W-RGBW-30K-IP22-20M
Price: 331.97 CAD
Availability: InStock

SKU: LCKIT-45W-RGBW-30K-IP22-20M

Brand: LEDCO

Ready to light up a whole floor in colour? This 20M RGBW LED strip starter kit gives you a generous run of colour-changing tape plus the components needed to power it and control it, all in one box. If you've been searching for LED strip lights, LED light strips or LED strip lighting and you keep ending up with a cart full of mismatched parts, this kit solves that problem. It's the RGBW format, which means red, green and blue diodes for scenes and accents plus a dedicated warm white channel for everyday light — so the same run can do a soft, usable glow on a Tuesday night and a full colour wash for a party. Think under-cabinet lighting, toe-kicks, cove and ceiling details, shelving, stair nosings and display cases.

The kit is built around the LCKIT-45W-RGBW-30K-IP22-20M, a 20 m length of RGBW LED tape with a warm 3000K white channel, rated IP22 for indoor use. The strip can normally be cut at the marked cutting points, so one long roll can be split into several shorter sections for different cabinets, shelves or coves without wasting material. The white channel renders colours cleanly for tasks and everyday living, while the RGB diodes blend smoothly for accent effects, and the included control system lets you dim the light to match the room and the time of day. Self-adhesive backing means most of the mounting is done by hand, no special tooling, and everything you need to energize the run comes with it — no guessing at drivers or connectors.

Twenty metres goes a long way: a full kitchen perimeter, a finished basement, a media room ceiling cove, a staircase, a reception desk, a retail display wall or a restaurant bar front. It's an indoor kit, so keep it out of the weather and away from wet locations — perfect for renovation projects, condos, offices and hospitality spaces across Canada. Working on a smaller room? The same kit is offered in shorter lengths: Starter kit 5M RGBW LED strip, Starter kit 10M RGBW LED strip and Starter kit 15M RGBW LED strip. Add this kit to your project and get colour, warm white and dimming in one go.

What's in the kit
This is a complete colour-changing bundle rather than a bare roll of tape. You get 20 m of RGBW LED strip lighting together with the components needed to power the run and control it, which is exactly what makes a first strip-lighting project go smoothly. Sourcing a driver, a controller and a length of tape separately is where most installations go wrong — wrong voltage, wrong connector, wrong control protocol. Here the pieces are meant to work together out of the box, so the installer's job is mounting, routing and connecting.

Light quality: four channels, two jobs
RGBW means the strip carries red, green and blue diodes plus a separate warm white channel at 3000K. That dedicated white channel matters: instead of faking white by mixing colours (which always looks a little off), you get a genuine warm, inviting light for daily use, with good colour rendering on that channel. The RGB diodes then layer on top for dynamic scenes, holiday colour, accent washes behind a TV or above a bar. Colour blending is smooth along the run, and the included control system handles dimming so you can drop the level right down for evening ambience or bring it up for task work.

Technical specifications
SKU: LCKIT-45W-RGBW-30K-IP22-20M
Type: RGBW LED strip starter kit
Length: 20 m
White channel colour temperature: 3000K (warm white)
Ingress protection: IP22 (indoor use)
Dimming: yes, through the included control system
Mounting: adhesive backing
Cutting: at the marked cutting points

Installation and electrical notes
Clean and dry the mounting surface before pressing the LED tape into place — dust, sawdust and silicone residue are the number one cause of strips peeling off a few weeks later. Plan the layout so the power connection lands near an available outlet or junction, and keep the run tidy with the adhesive backing pressed firmly along its full length. On long installations, feeding power from both ends helps keep brightness consistent from the first diode to the last, instead of fading out at the far end. Cut only at the marked points, and reconnect sections with the appropriate connectors so all four channels stay aligned. Mounting the tape inside an aluminum profile is strongly recommended: it pulls heat away from the diodes, protects them from knocks and cleaning, and gives the finished edge a built-in look with a diffuser instead of a line of visible dots. Because the kit is rated IP22, keep it to dry indoor locations — no exteriors, no direct contact with water.

Where it shines, and related kits
Residential: kitchen under-cabinet and toe-kick lighting, pantry shelving, basement ceiling coves, home theatre and media room perimeters, staircases, walk-in closets, headboards and bathroom vanity surrounds. Commercial: reception desks, retail display cases, shelving units, restaurant and bar fronts, hotel corridors and hospitality lounges. For smaller rooms or shorter runs, the same kit is available as the Starter kit 5M RGBW LED strip, the Starter kit 10M RGBW LED strip and the Starter kit 15M RGBW LED strip. For a tiled recess, look at the Shower niche kit with aluminum profile, LED strip and power supply.