LED STRIP 24V 2538 19.2W/M 2304LM/M IP22 (30K)

Name: LED STRIP 24V 2538 19.2W/M 2304LM/M IP22 (30K)
Brand: LEDCO
SKU: LCLS24V-96W-30K-IP22
Price: 89.97 CAD
Availability: InStock

SKU: LCLS24V-96W-30K-IP22

Brand: LEDCO

Some rooms only need one thing to go from flat to flattering: a clean, continuous line of light. That is exactly what this LED strip delivers. Known on job sites and in search bars as LED strip lighting, LED tape, strip lights or a light ribbon, this 24V flexible strip hides in a cove, under a cabinet, above a bulkhead or inside an aluminum channel and washes the surface with smooth, warm white light. It is a favourite for kitchen under-cabinet task lighting, ceiling cove and crown moulding accents, stair and hallway guidance, retail display cases, bar backs, reception desks and signage. Because it is sold by the metre and can be cut to length, one roll can cover several zones of the same project with a perfectly matched tone of light.

The numbers behind the glow are serious. Each metre carries 128 Epistar 2835 SMD LEDs for a tight, dot-free line, drawing 19.2W per metre at an efficiency of 120 lm/W — bright enough for real task lighting, not just decoration. The 3000K warm white colour temperature flatters wood, brass, stone and warm paint palettes, while a CRI of 90+ keeps skin tones, fabrics and merchandise looking true. It runs on 24V DC, is dimmable, spreads light at a 120º beam angle, and is UL listed with a rated lifespan of 50,000+ hours. The PCB measures 10 mm wide with a 3 oz. copper build, the cut size is 62.5 mm (8 LEDs) and the maximum run length is 10 m. Protection rating: IP22, made for dry indoor installs.

This is the strip for condo renovations in Toronto, custom kitchens in Montréal, basement rec rooms in Calgary, boutiques, cafés, clinics and offices — anywhere a designer wants light without seeing the source. Order the SKU LCLS24V-96W-30K-IP22 in 3000K, or pick the same strip in another tone: LED strip 24V 19.2W/m IP22 2700K, 3500K, 4000K or 5000K. For damp or outdoor-style locations, the same 19.2W/m engine is offered in an IP66 waterproof 3000K version. Plan your run, add a 24V driver, and light it up.

Built for a clean, dot-free line of light
The heart of this 24V LED strip is a high-density array of 128 Epistar 2835 SMD chips per metre. Packing that many emitters into each metre is what erases the "dots" you see on cheaper, low-density tape, especially when the strip sits close to a wall, a countertop or the inside face of a cove. The flexible circuit board is 10 mm wide, built on a 3 oz. copper PCB that helps pull heat away from the diodes and keeps output stable over long runs. With a 120º lighting angle, the beam opens wide and blends quickly, so a single line of tape can wash an entire ceiling reveal or backsplash evenly.

Light quality you can trust on finishes
At 3000K, this strip sits firmly in the warm white family — the tone most Canadian homeowners choose for living rooms, kitchens, bedrooms and hospitality spaces because it feels relaxed and inviting after dark. Paired with a CRI of 90+, colours stay honest: oak and walnut look rich rather than yellow, whites stay clean, and merchandise or artwork is rendered the way it was meant to be seen. Output is rated at 19.2W per metre with an efficacy of 120 lm/W, which means real, usable brightness for cutting vegetables, reading a menu or lighting a display case — not just a decorative glow.

Technical specifications
Product code: LCLS24V-96W-30K-IP22
Chip: Epistar 2835 SMD
LEDs per metre: 128 pcs
Power: 19.2W/m ±10%
Efficacy: 120 lm/W
Colour temperature: 3000K
CRI: 90+
Beam angle: 120º
Voltage: 24V DC
Dimmable: Yes
PCB width: 10 mm
PCB thickness: 3 oz.
Maximum run length: 10 m
Cut size: 62.5 mm (8 LEDs)
Protection rating: IP22
UL: Yes
Lifespan: 50,000+ hours

Wiring, dimming and installation
Running on 24V DC instead of 12V means less voltage drop over distance and longer continuous runs — here, up to 10 m from a feed. Cut only on the marked points every 62.5 mm (8 LEDs) so each segment stays complete, and calculate your total load before choosing a driver: at 19.2W per metre, a 5 m run draws 96W, so size the power supply with headroom. The strip is dimmable with compatible 24V dimming controls, which lets you drop a kitchen or lounge down to a soft evening level. For feed wires and long home runs, the 24V voltage drop chart included in the Documentation tab tells you exactly how far you can go with each wire gauge before losses become a problem. Mounting inside an aluminum extrusion with a diffuser is strongly recommended for finished work: it protects the tape, spreads the light and gives the installation a factory-made look.

Where it works and what goes with it
Think under-cabinet and toe-kick lighting, ceiling coves and drop bulkheads, floating shelves, closet interiors, stair nosings, headboard niches, bar fronts, retail shelving, reception counters and illuminated signage. With an IP22 rating it belongs in dry indoor locations; for showers, exteriors, soffits and other wet or damp spots, choose the IP66 version of this 19.2W/m strip in 3000K. Matching the tone across a whole home is easy: the same strip exists in 2700K, 4000K and 5000K for offices, garages and workshops. The Documentation tab holds the full technical spec sheet and the 12V–24V voltage drop chart, everything your electrician needs before the drywall goes up.

Technical Files