Built like real track, not a gadgetThe LL Series TK60 family is extruded aluminum track with 20-amp rated flat, solid integral conductors, and the
track rail TK6004-BK is the 4-ft black version of it. The extrusion is 1⁄32" die cast aluminum construction with 3⁄64" PVC insulators holding 12 gauge flat conductor wiring. That rigidity matters: a straight, true rail means your
track light heads slide smoothly, lock firmly and stay aimed where you put them. The low-profile section — ¾" (21mm) tall by 1 3⁄8" (35mm) wide — keeps the hardware discreet so the eye goes to the light, not the rail. The black finish is a favourite in modern kitchens, loft ceilings and retail spaces with exposed structure.
Electrical and installation detailsThis is a 1-circuit track: single circuit track is available for 120V applications, with single hot and neutral conductors rated for 20 Amps per branch circuit. Copper electrical conductors are concealed in an insulating thermoplastic low-profile rack cross-section, and a polarity groove is located on the face of the track to indicate the location of the grounding conductor — so every head you clip in lands with the correct polarity. System electrical rating is 20A, 120V, 60Hz. Track lighting is a single circuit electrical distribution system designed to supply power to lighting units in flexible ways: bring power in with a live-end, a live-end with canopy, a wired-end from a receptacle, or a center feed anywhere along the run, then cap the open end. Suspension from a high or sloped ceiling is possible with the hollow stem rod kits listed as accessories. Have the connection made by a qualified electrician as required by your local code.
Technical specificationsSKU: TK6004-BK
Brand: LITELINE
Series: LL Series, TK60 track sections
Length: 48" (1219mm)
Profile: ¾" (21mm) x 1 3⁄8" (35mm)
Finish: BK — Black
Circuit: 1-circuit
System electrical rating: 20A, 120V, 60Hz
Conductors: 12 gauge flat conductor wiring, copper, concealed
Construction: 1⁄32" die cast aluminum with 3⁄64" PVC insulators
Compatibility and accessoriesThe Liteline track system is compatible with all Liteline track accessories and connectors, and sections can be joined together using any of the compatible track connectors. The accessory family includes the I-connector IC6101 for two sections at 180°, the L-connector LC6102 at 90°, the T-connector TC6103 for three sections, the X-connector XC6104 for four sections, and the flexible connector FC6105 when your ceiling asks for an unusual angle. Power options include the live-end LE6110, the live-end with canopy LE6111, the wired-end WE6110, the center feed CF6108 and the live-end conduit feed CA6106. Finish the run with the TK6000-END end cap, and suspend it with the TDR62 stem rod kit, the RODF62 rod for track fixtures or the RODR62 rod to hang the track from the ceiling. Accessories are sold separately.
Where it works and what's in the Documentation tabUse it over a kitchen island or peninsula, along a hallway of framed art, above a basement bar, in a home office, or in a boutique, café, salon, bakery or small gallery where the display changes often. Other finishes of the same 4-ft section are available —
TK6004-WH white,
TK6004-BN brushed nickel and
TK6004-SL silver — and if you want rail, feed and heads together, look at the
black track kit TK6004-BK-KIT2. The full TK6004-BK spec sheet, with technical drawings, the ordering guide and the accessory list, is available in the Documentation tab of this page.