icon-info 0
No products in the cart.
  • fr
    • Back to Products
    FR
    0
    No products in the cart.
    Menu Search Cart
    FLEXIBLE CONNECTOR - FBT6124-BL-WH-3
    FLEXIBLE CONNECTOR - FBT6124-BL-WH-3

    FLEXIBLE CONNECTOR - FBT6124-BL-WH-3

    SKU: FBT6124-BL-WH-3

    Brand: LITELINE

    Wiring a run of under-cabinet or cove lighting and stuck at the last step — getting power to the first bar? That is exactly what the FBT6124-BL-WH-3 flexible connector is built for. This is a 24" flexible 3-wire power feed with bare leads from LITELINE, the little piece that quietly turns a hardwired supply into a clean, finished lighting run. People look for it as a flexible power feed, a bare lead connector, an LED connector or simply a flexible connector for linkable light bars, and it does one job extremely well: it carries power from your junction box or driver location to your FloroBar™ light bars without awkward bends, exposed splices or improvised wiring. Use it in kitchens, display cases, closets, coves, bookcases, retail shelving — anywhere the fixtures are tucked out of sight and the supply point is not.

    The flexible body measures 24" (610 mm), which gives you real slack to route around cabinet gables, corner blocks, back panels and toe-kicks instead of forcing the light bar to sit where the wire lands. It is a 3-wire connector, designed for 3-wire FloroBar™ systems, with easy pre-spliced bare leads for hardwiring at the supply end — no cutting, no stripping, no guesswork at the connection point, just land the leads and go. The white finish blends into typical cabinet interiors and cove details, so even when a bit of the lead shows, it disappears instead of drawing the eye. Because the feed is flexible rather than rigid, it also absorbs the small alignment differences you always find in real millwork, which makes install faster and tidier. SKU: FBT6124-BL-WH-3.

    This is a cabinet, cove and display accessory, so it earns its place on residential renovations and commercial fit-outs alike: kitchen uppers and islands, bathroom vanities, pantry and closet shelving, reception desks, jewellery and bakery display cases, museum vitrines and retail gondolas. Canadian contractors like that the hardwired bare-lead end keeps everything inside the wall or cabinet cavity, with no visible adapter hanging under a door. It is made to work with 3-wire FloroBar™ light bars and their matching linking hardware; if your run uses the plug-style feed instead of bare leads, look at the Flexible connector FBT6124-WH-3. Add it to your lighting run and finish the job the clean way.

    6.97$

    What this connector actually does
    The FBT6124-BL-WH-3 is a flexible power feed with bare leads and a 3-wire connector, built to bring line power to a 3-wire FloroBar™ light bar system. In a typical installation, the bare-lead end is hardwired at the supply point — a junction box, a switched supply or the output location feeding the run — and the connector end plugs into the first light bar. From there, the rest of the run continues with links or jumpers between bars. It is a small component, but it is the piece that decides whether a job looks professionally finished or improvised, because it replaces field splices and taped joints with a purpose-made flexible power feed.

    Construction and finish
    The feed is flexible along its full 24" (610 mm) length, so it bends around cabinet gables, corner cabinets, back panels, blocking and cove returns without kinking the light bar out of alignment. The leads arrive pre-spliced, which means the installer is not stripping and joining conductors on site — one of the most common sources of callbacks in under-cabinet lighting. The white finish keeps it visually quiet inside white or light-coloured cabinet interiors, cove troughs and display cases, where any dark cable tends to stand out against the illuminated surface.

    Technical specifications
    Model: FBT6124-BL-WH-3
    Brand: LITELINE
    Type: Flexible 3-wire power feed with bare leads
    Length: 24" (610 mm)
    Wiring: Pre-spliced bare leads for hardwiring
    Connector: 3-wire
    Compatibility: 3-wire FloroBar™ systems
    Application: Cabinet, cove and display

    Compatibility and installation notes
    Match the wire count: this is a 3-wire connector for 3-wire FloroBar™ systems, so confirm the light bars in your run use the same three-wire configuration before ordering. Hardwiring must be done by a qualified electrician, following local Canadian electrical code and the fixture's own installation instructions; plan the supply point so the flexible feed reaches the first bar comfortably rather than being pulled tight. Leave a small service loop where the leads enter the cabinet cavity, secure the feed to the millwork so it cannot be pinched by a drawer box or a door hinge, and keep it clear of heat sources such as ovens and cooktops. For additional configurations in this family, the plug-fed version Flexible connector FBT6124-WH-3 covers runs that are not hardwired at the source.

    Where it gets used and what's included in the docs
    Residential projects: kitchen upper cabinets, islands and peninsulas, pantry shelving, walk-in closets, vanity lighting, crown moulding and cove details, stair niches and built-in bookcases. Commercial projects: retail display cases and shelving, bakery and deli counters, jewellery vitrines, reception desks, hotel millwork, office casework and showroom displays — the same cabinet, cove and display family of applications the product was designed for. The technical PDF (FBT6124-BL-WH-3 Spec Sheet) is available in the Documentation tab of this page for your submittals, shop drawings and inspection files. As LITELINE notes, product specifications are subject to change without notice as products are improved, so always check the current spec sheet before finalizing a package.

    Related products

    Top