LED LOW PROFILE SURFACE MOUNT DISCLITE - DL6-15W-WH

LED LOW PROFILE SURFACE MOUNT DISCLITE - DL6-15W-WH

SKU: DL6-15W-WH

Brand: LITELINE

Say goodbye to bulky ceiling fixtures: the LITELINE DISCLITE DL6-15W-WH is a slim LED low profile surface mount disc light that hugs the ceiling and spreads soft, even light across the room. People look for it under many names — disc light, surface mount downlight, ceiling puck, pot light replacement, surface mount LED fixture — and they all point to the same simple idea: a clean round luminaire that mounts directly on the surface, with no deep recess to cut and no housing to bury in the ceiling. It installs onto a standard octagon box or retrofits into an existing recessed housing, which makes it a favourite for hallways, closets, entryways, laundry rooms, stairwells, basements, corridors and small commercial spaces where a low-profile, low-glare light is exactly what the job calls for.

The DISCLITE family is built around a durable airtight aluminum body with a translucent white polycarbonate diffuser lens, so the light comes out smooth and easy on the eyes instead of harsh and dotty. This model wears a crisp white (WH) finish that blends into just about any ceiling, and the wide beam spread keeps the wash of light broad rather than spotty. It is a colour selectable fixture, meaning you choose the white tone you want right at installation with a simple switch — warm and cozy, neutral, or crisp and clean — without ordering a different product for every room. Dimming is supported with industry standard forward/reverse phase and TRIAC dimmers, so you can dial the room down for movie night or evening service.

From a condo renovation in Montréal to a clinic corridor, a hotel hallway, an office break room or a retail back-of-house, this luminaire is a workhorse that suits health-care, hospitality, offices, residential and retail applications alike. Canadian homes with shallow ceiling cavities, concrete slabs or finished basements benefit most: no housing, no big hole, just mount and go. Need the smaller 4-inch version for tighter spots or tighter spacing? Have a look at the LED low profile surface mount Disclite DL4-12W-WH. Check the spec sheet in the Documentation tab, then add DL6-15W-WH to your next lighting plan.

72.97$


Built to last, built to disappear
The DISCLITE line is made from a durable airtight aluminum body topped with a translucent white polycarbonate diffuser lens. That combination does two jobs at once: the aluminum pulls heat away from the LED module so the fixture keeps performing year after year, and the diffuser softens the output for low glare — no hot spots staring back at you from a hallway ceiling. The white finish keeps the fixture visually quiet, which is exactly what you want when you are lining up several discs down a corridor or around the perimeter of a room.

Light quality and colour selection
This is a general application light fixture with a colour selectable switch, so a single SKU covers warm, neutral and cool white needs. Pick the tone on site, room by room: cozier light for bedrooms and lounges, cleaner light for kitchens, laundry rooms, garages and work areas. The wide beam spread of the lens makes the light overlap nicely between fixtures instead of leaving dark gaps between them, which is what gives a hallway or a stairwell that even, finished look.

Electrical, dimming and installation
Dimming is handled by industry standard forward/reverse phase and TRIAC dimmers — contact the factory for a listing of compatible dimmers before you finalize a control package. On the install side, the included mounting hardware covers two scenarios: mounting to a standard 4" octagon box, and retrofitting into an existing 4" recessed housing. That second option is gold on renovations, because you can modernize an older ceiling full of housings without patching drywall. Important detail from the manufacturer: wall mounting is approved only with a 4-inch octagonal box, and retrofit can installations are not approved for wall mounting.

Technical specifications
SKU: DL6-15W-WH
Brand: LITELINE
Application: Surface mount / retrofit
Colour: WH (white)
CCT: colour selectable
Dimming: yes — forward/reverse phase, TRIAC
Mounting hardware included: for 4" octagon box and for 4" recessed housing retrofit
Operating temperature: -30°C~45°C (-22°F~113°F)

Where it earns its keep, and what to read next
Think corridors in a medical clinic, guest hallways and stairwells in a boutique hotel, storage and back-of-house rooms in a shop, an open office with a low ceiling, or a home where a client wants clean ceilings without a full recessed lighting job. Because it is surface mount, it also solves the classic Canadian renovation headache: joists, ducts and insulation in the way. Accessories are sold separately. For a smaller disc to mix into the same project, pair it with the LED low profile surface mount Disclite DL4-12W-WH. The full technical PDF spec sheet is available in the Documentation tab of this page — review it with your electrician before ordering quantities or locking in a dimmer.
Technical Files
Top