AST TRACK LIGHT HEAD - 35W - J TYPE - 5CCT - MF36 - 120~277V - CRI90+ - TRAIC - BLACK - DLC

Name: AST TRACK LIGHT HEAD - 35W - J TYPE - 5CCT - MF36 - 120~277V - CRI90+ - TRAIC - BLACK - DLC
Brand: TUROLIGHT
SKU: AST-TRH-J-35W-MK5-120-D-MF-BK
Price: 155.97 CAD
Availability: InStock

SKU: AST-TRH-J-35W-MK5-120-D-MF-BK

Brand: TUROLIGHT

Point the light exactly where it matters. The TUROLIGHT ASTELLA Series **AST-TRH-J-35W-MK5-120-D-MF-BK** is a 35W LED track light head in a clean black finish — the kind of adjustable track lighting head people search for when they want to wash a feature wall, spotlight merchandise or finally light a kitchen island properly. Also called a track spot, track projector or track fixture head, it snaps onto a single-circuit J-type track and rotates and tilts to aim the beam wherever the display, artwork or work surface happens to be. Because the colour temperature is selectable right on the fixture, one head covers a warm, cozy living room and a crisp, bright retail floor without ordering two different products.

Real numbers, real benefits: 35W of LED output replaces far hungrier halogen track heads and cuts the heat load on your ceiling, while the 5CCT selectable colour temperature switch — five colour temperatures chosen with a small switch on the back of the head — lets you fine-tune the mood on site instead of guessing from a catalogue. CRI90+ means colours stay honest: skin tones, wood grain, paint chips, fabric and food all look like themselves, which matters enormously in boutiques, galleries and salons. The head runs on 120V, is TRIAC dimmable for smooth low-light scenes, carries a DLC listing, and measures 3.54 x 8.51 inches (Ø90 mm, 216 mm), the largest of the three ASTELLA J-type heads. Note that this is an indoor product: track systems must not be installed in damp or wet locations.

This 35W head is the heavy hitter for high ceilings and long throws — retail stores, showrooms, restaurants, cafés, offices, clinics, condo lofts and open-concept renovations across Canada. It mounts on single-circuit J-type track only, and works beautifully mixed with its smaller siblings on the same run: use the AST track light head 10W black for accent work, the AST track light head 20W black for mid-range, and choose the AST track light head 35W white if your ceiling is light-coloured. Plan your layout, count your heads and light the room the way you actually use it.

155.97$

Supplier availability: In stock (+10)

Learn more
Documentation

Built for aiming, built to last
The ASTELLA Series track head is a compact cylinder on a rotating yoke and adapter, so you can swing the head around the track axis and tilt it to land the beam on a shelf, a canvas, a counter or a reception desk. The 35W version is the largest of the family at a Ø90 mm (3.54 in) head and 216 mm (8.5 in) overall dimension, giving the LED and its heat sink room to breathe. The black finish keeps the fixture visually quiet against dark ceilings and exposed structure, while the adapter locks into the track with a spring-loaded locking tab and a simple quarter-turn.

Light quality and colour selection
With CRI90+, this head renders colour far more faithfully than a typical builder-grade spot — a genuine advantage anywhere merchandise, art, food or people are on display. The 5CCT feature gives you five selectable colour temperatures through a small colour-select switch located on the back side of the track head, so you set the ambience after the heads are up and the room is furnished. Combined with TRIAC dimming, you can drop the level for evening service in a restaurant or raise it for a weekend retail rush, all from a standard forward or reverse-phase wall dimmer.

Technical specifications
Model number: AST-TRH-J-35W-MK5-120-D-MF-BK
Ordering code: 5220012
Series: ASTELLA Track Head, J-Type, single circuit
Wattage: 35W
Input voltage: 120V
CCT: 5CCT selectable (switch on back of head)
CRI: 90+
Dimming: TRIAC
Dimension: 3.54 x 8.51 inch (Ø90 mm, 216 mm)
Finish: black
Certification: DLC

Electrical work and installation
Installation follows the printed instruction sheet: cut power at the breaker or remove the fuse — a wall switch alone is not enough — then attach the mount plate to the J-box and connect black to hot, white to neutral and green to ground. Tuck the wires into the box, mark and drill for the toggle bolts, set the track channel onto the mounting plate, tighten the toggle bolts and the two mount plate screws, then install the connection terminal respecting the single-pin and double-pin orientation and slide the canopy cover over the J-box. For the head itself, hold the adapter with your thumb on the locking tab, align the tab directly opposite the polarity line (the arrows on the tab point to it), push the adapter into the track and rotate a quarter turn (90°) counter-clockwise. Safety rules from the manufacturer: indoor only — never damp or wet locations — never less than 5 feet above the floor, never within 6 inches of curtains or combustible material, never more than one branch circuit unless the track is built for it, and nothing but track luminaires on the track. The housing gets hot: wait at least 5 minutes after power off before touching it.

Compatibility, applications and documents
This head is designed for single-circuit J-type track, ceiling mounted only. Mix wattages on one run for a layered scheme — the 10W black head for small accents, the 20W black head for general highlighting, and the 20W white head or 35W white head when the ceiling calls for white hardware. Typical projects: a clothing boutique aiming heads at each rack, a café highlighting the pastry case, an architect's office grazing a brick wall, a home gallery corridor, or a kitchen renovation where one track replaces a row of pot lights. The full spec sheet and installation instructions for AST-TRH-J-35W-MK5-120-D-MF-BK are in the Documentation tab — download them before you order your track lengths and connectors.

Technical Files