Built for real working spaces
The A35 25W E26 LED light bulb is a large-format lamp designed to take over from the big incandescent and halogen lamps that used to light basements, garages and back rooms. Its plastic casing keeps the bulb light in the socket — a real advantage in older porcelain or pendant fixtures — and the familiar A-shape silhouette means it looks at home in a shade, a bare-socket keyless fixture or a utility lampholder. At 200 mm in length and 110 mm in diameter, it's noticeably bigger than a standard household bulb, so a quick measure of your fixture opening before installation avoids surprises.
Light quality you can work under
This bulb delivers 3000 lumens of Natural White 4000K light — the neutral tone most people choose for work areas, laundry rooms and commercial spaces because it reads as clean and bright without going blue. The 220° beam angle is the other half of the story: instead of concentrating light in a narrow cone like a spot, it wraps light around the lamp for broad, even general lighting. That's exactly what you want in a room where a single central fixture has to cover the whole floor, and it's why this bulb works so well as a one-bulb solution in a garage bay or a storage room.
Technical specifications
Product Code: PLYC1484
Housing: Plastic casing
Available Sockets: E26
Dimensions: 200 mm length x 110 mm diameter
LED Consumption: 25W
Good replacement for: 250W halogen
Dimmable: No
Input Voltage: E26, 120V
Beam Angle: 220°
CCT: Natural White 4000K
Lumens: 3000 lm
Working Temperature: -40 to 45 °C
Life: 15 000 hours
Electrical and installation notes
Installation is as simple as it gets: cut the power at the switch or breaker, remove the old lamp, and thread the E26 medium base bulb into the socket on a standard 120V circuit. No driver, no transformer, no rewiring. Because this model is non dimmable, it must be fed from a regular on/off switch — putting a non-dimmable LED on a dimmer circuit can cause buzzing, flicker or premature failure, so if a dimmer is already on that circuit, swap it for a standard switch or choose a dimmable lamp instead. Also keep the lamp in open or well-ventilated fixtures whenever possible; fully enclosed fixtures trap heat around any LED lamp. The wide -40 to 45 °C operating range means it starts instantly in a freezing garage, unlike fluorescent tubes that sputter and stay dim in the cold.
Applications and documentation
Contractors use this lamp to relamp multi-unit basements, stairwells and mechanical rooms in one pass; homeowners put it in the garage, the workshop, the cold room and the shed; small businesses use it in stockrooms, corridors, back offices and service bays. With a 15 000-hour rated life, a fixture burning about four hours a day represents many years before you touch a ladder again — a genuine advantage for high ceilings and hard-to-reach fixtures. Full details, dimensions and performance values are listed in the technical PDF for the A35 25W E26 LED light bulb, available in the Documentation tab of this page, so you can confirm fit and specs before you order.
