7W DIMMABLE GU10 SMD LED LIGHT BULBS - PLYC24332 (PACK OF TWO)

7W DIMMABLE GU10 SMD LED LIGHT BULBS - PLYC24332 (PACK OF TWO)

SKU: PLYC2433-3000

Brand: LED MONTREAL

Say goodbye to hot, power-hungry halogens without changing a single fixture. The 7W Dimmable GU10 SMD LED Light Bulbs - PLYC24332 (Pack of Two) from LED MONTREAL are the straight-swap GU10 LED upgrade people search for every day — gu10 led bulbs, twist-lock spot bulbs, dimmable track and pot light lamps. They screw... actually, they twist right into the same GU10 twist-and-lock socket your existing halogen spots already use, so you can refresh recessed pot lights, track heads, monorail spots, display cases and accent fixtures in an afternoon. Sold in a handy pack of two, they're the easy answer when you want brighter, cooler-running light for a kitchen reno, a retail display or a whole condo's worth of spotlights.

Each bulb draws just 7W and delivers 500 lm, making it a solid replacement for a 50W halogen — same punch of light, a fraction of the energy. The 40° beam angle is a medium spread, ideal for general-purpose lighting rather than a narrow pinpoint, so rooms feel evenly lit. Built around a Luminus LED chip and rated for 25 000 hours of life, these bulbs run on 120V and are dimmable from 10% to 100% for real mood control. Choose your white: Bright White 3000K for a warm, welcoming glow, or Daylight 5000K for a crisp, energizing light. Compact at 50 mm diameter x 53 mm length with pins, they fit standard GU10 housings, and a working temperature range of -40 to 45° means they shrug off cold Canadian garages, entryways and unheated spaces.

These dimmable GU10 LED bulbs shine in kitchens over islands and counters, in hallways and staircases, in living rooms with track lighting, and in bedrooms where you want to dial the light down at night. On the commercial side, they're a favourite for boutiques, cafés, salons, galleries and office reception areas where accent spots run long hours and bulb changes cost time. Because they replace 50W halogens one-for-one, they're perfect for landlords, contractors and renovators upgrading a full floor of recessed spots. Model PLYC2433-3000 is ready to install — grab a few packs and finally stop climbing the ladder to change bulbs.

7.97$


Built to replace halogen, not just imitate it
Halogen GU10 spots are notorious for burning hot, burning out and driving up the hydro bill. These 7W GU10 SMD LED bulbs use surface-mount LED technology on a Luminus LED chip, paired with a body sized at 50 mm diameter x 53 mm length with pins — the standard GU10 format, so nothing about your fixture has to change. The familiar twist-and-lock base drops into your existing pot lights, track heads and spot fixtures, and the pack of two means you can do a pair of fixtures at a time or keep a spare on the shelf.

Light quality and beam control
Each lamp produces 500 lm from only 7W, a genuine stand-in for a 50W halogen. The 40° beam angle is the sweet spot for general lighting: wide enough to wash a counter, a hallway or a seating area evenly, tight enough to keep a bit of accent character on artwork or shelving. Two colour temperatures are offered so you can match the mood of the room — Bright White 3000K for warm, cozy living spaces, or Daylight 5000K for kitchens, workshops, bathrooms and retail displays where you want crisp, clean rendering.

Electrical, dimming and installation
These bulbs run directly on 120V line voltage through the GU10 socket — no transformer, no driver, no rewiring. They are dimmable from 10% to 100%, so you keep full control from a bright working level right down to a soft evening glow; always pair them with a dimmer rated for LED loads and check the dimmer's minimum load when you're only running one or two bulbs on a circuit. Installation is as simple as it gets: cut the power, let the old halogen cool, press and twist the bulb out, insert the pins of the new LED, twist to lock. Handle the LED by its body rather than the lens, and you're done in seconds per fixture.

Technical specifications
SKU: PLYC2433-3000
Brand: LED MONTREAL
Socket: GU10
Dimensions: 50mm diameter X 53mm length with pins
LED chip brand: Luminus
Consumption: 7W
Replaces: 50W halogen
Dimmable: Yes (10%-100%)
Input voltage: 120V
Beam angle: 40°
CCT: Bright White 3000K, Daylight 5000K
Lumens: 500 lm
Working temperature: -40~45°
Life: 25 000 hours
Packaging: pack of two

Where they pay off, and the paperwork
Think of a kitchen with eight recessed spots over the island, a hallway of dimmable LED downlights in a rental unit, a café with track heads over each table, or a boutique lighting a merchandising wall. With 25 000 hours of rated life, a bank of these bulbs can run all day in a store without constant relamping, and the -40 to 45° working temperature range means they also behave in a cold porch ceiling, a three-season room or an unheated garage shop. For contractors quoting a retrofit, the math is simple: same fixtures, same sockets, 7W instead of 50W per point. The full technical PDF for the 7W Dimmable GU10 SMD LED Light Bulbs - PLYC24332 (Pack of Two) is available in the Documentation tab with all dimensions, photometric and electrical data for your submittals.
Top