4W DIMMABLE E26 G16 SMD LED LIGHT BULB - PLF1602

Name: 4W DIMMABLE E26 G16 SMD LED LIGHT BULB - PLF1602
Brand: LED MONTREAL
SKU: PLF1602W
Price: 5.97 CAD
Availability: InStock

SKU: PLF1602W

Brand: LED MONTREAL

Some bulbs are meant to be hidden. This one is meant to be seen. The 4W Dimmable E26 G16 SMD LED Light Bulb from LED MONTREAL is the small round globe bulb people look for when they type dimmable LED bulb, 4W LED bulb or G16 globe bulb — a glass decorative bulb with a standard medium screw base that drops straight into the fixtures you already own. Vanity bars over the bathroom mirror, pendant clusters above a kitchen island, ceiling fan light kits, wall sconces, chandeliers, dressing-room mirrors and café-style fixtures all take this shape, and the SMD LED engine inside gives you soft, even light without the heat and the burnouts of the old glass bulbs.

It draws just 4W and delivers 350 lumens, a good replacement for a 40W halogen bulb while using about 80% less energy. The colour is warm white 2700K, the cozy candle-like tone that flatters wood, skin tones and paint, and the CRI >80 keeps colours looking true in front of a mirror. The 270° beam angle spreads light all around the glass for general-purpose illumination instead of a harsh spot. It runs on 120V, is dimmable from 10% to 100%, uses an E26 socket and measures 55 mm diameter X 80 mm length. The LED chip comes from Luminus, the rated life is 15 000 hours, and the working temperature range of -40~45° means it keeps its cool — and its warmth — in a Canadian entryway or a three-season porch fixture.

This is the bulb for homeowners refreshing a bathroom, landlords standardizing fixtures across units, and small businesses lighting a salon mirror, a boutique fitting room, a bistro or a reception desk where the bulb is part of the décor. Because it uses the common E26 medium base, it fits virtually any lamp, sconce or pendant that took a 40W incandescent globe, and pairing it with a quality LED-compatible dimmer gives you full mood control from soft glow to bright task light. Order SKU PLF1602W in the quantity your project needs, check the technical PDF in the Documentation tab, and give every fixture in the room the same warm, flicker-free light.

Built like a bulb should be
The G16 SMD LED bulb keeps the familiar look of a classic globe: a real glass casing around an SMD LED board, with a standard E26 medium screw base. The compact 55 mm diameter X 80 mm length format slips into tight vanity bars, small pendant shades and multi-arm chandeliers where a larger bulb would stick out or crowd its neighbour. Inside, the LED chip is supplied by Luminus, and the whole assembly is rated for 15 000 hours of use — years of everyday switching in a bathroom or hallway before you think about a ladder again.

Light quality you actually notice
Output is 350 lumens from only 4W, a solid stand-in for a 40W halogen bulb at roughly 80% less energy draw. The single colour temperature is warm white 2700K, the same inviting tone people associate with incandescent lighting, and a CRI greater than 80 renders skin tones and finishes naturally — important in front of a makeup mirror or over a dining table. The 270° beam angle is a wide, medium-sized spread meant for general-purpose lighting, so the glass glows evenly instead of throwing a hot spot on the ceiling.

Electrical and installation details
The bulb runs directly on 120V line voltage — no driver, no transformer, no rewiring. It is dimmable from 10% to 100% when paired with a dimmer rated for LED loads; because a 4W load is very light, a good practice is to check the dimmer's minimum load and, in multi-bulb fixtures, to use identical bulbs on the same circuit so every lamp tracks together through the dimming range. Installation is as simple as it gets: cut the power, screw the bulb into the E26 socket, restore power. The rated working temperature of -40~45° gives it real range for covered porches, unheated entryways and cottage fixtures across Canada.

Technical specifications
SKU: PLF1602W
Brand: LED MONTREAL
Available sockets: E26
Dimensions: 55mm diameter X 80mm length
LED chip brand: Luminus
LED consumption: 4W
Good replacement for: 40W halogen
Dimmable: Yes (10%-100%)
Input voltage: 120V
Beam angle: 270°
CCT: Warm White 2700K
Lumens: 350 lm
Working temperature: -40~45°
Life: 15 000 hours
CRI: >80

Where it works, and what comes with it
Think of every fixture where the bulb shows: a three-light vanity over a bathroom mirror, a row of clear-glass pendants above a kitchen island, a stairwell sconce, a bedside lamp, a ceiling fan light kit, a barber chair mirror, a boutique fitting room or a bistro's front window. Contractors like it for rental turnovers and multi-unit refreshes because one E26 dimmable LED bulb covers most of the decorative sockets in a suite. Full documentation is available on this page: the technical PDF spec sheet for the 4W Dimmable E26 G16 SMD LED Light Bulb - PLF1602 lists every value above and is worth downloading before you finalize a fixture schedule or hand the job off to your electrician.

Technical Files