Built for high output and true colour
The 3014CCTK kit is based on 3014 SMD LEDs mounted on a compact 10 mm wide flexible circuit, a width that slips into most standard aluminum channels and tucks neatly under cabinets, behind valances or into coves. The tunable-white architecture combines warm and cool emitters on the same tape, so a single run covers 2700K warm white, 4500K natural white and 6500K cool white plus every blend along the way. That means one continuous line of light, one power feed, one installation — instead of doubling up strips to chase two different moods.
Light quality that flatters everything it touches
With a CRI greater than 90, this strip renders colour close to natural daylight. In a kitchen, tomatoes look red and cutting boards look like real wood. In a retail display or a bathroom vanity, fabrics, cosmetics and skin tones read correctly instead of turning grey or yellow. Output sits at approximately 1100 lm/m depending on the CCT selected, with a power draw of 16W/m at 24V — enough punch for genuine task lighting under upper cabinets, not just a decorative glow. Remember to budget your power supply according to total metres installed and to add headroom rather than loading a driver to its limit.
Technical specifications
SKU: 3014CCTK
Brand: LED MONTREAL
LED type: 3014 SMD
Strip width: 10mm
Voltage: 24V
Required power: 16W/m at 24V
Luminous flux: approx. 1100 lm/m (depending on CCT)
CRI: >90
Colour temperatures: 2700K warm white to 4500K natural white to 6500K cool white, adjustable
Ingress protection: IP20
Certification: UL Listed for Canada and USA
Installation and heat dissipation — read this first
Low-voltage 24V operation keeps voltage drop manageable over longer runs and makes the system safe and simple to wire in residential and commercial settings. The critical point: like all High Intensity Strips, the UL Listed 3014 strip MUST benefit from proper heat dissipation to ensure performance and durability. Attempting to install it on an improper surface may permanently damage the strip and the surface. Mount it on an aluminum profile or another surface capable of pulling heat away from the tape, avoid enclosing it in wood or plastic without ventilation, and clean the mounting surface before applying. The IP20 rating restricts this kit to dry indoor locations — no exteriors, no showers, no soffits exposed to weather.
Where it works and what's in the documents
Think kitchen under-cabinet and toe-kick lighting, cove and ceiling perimeter lighting, floating shelves, pantries, closets, home theatres, staircases and headboards on the residential side. On the commercial side: retail shelving and display cases, jewellery and cosmetics counters, café and restaurant millwork, salon stations, office reception desks and showroom niches — anywhere staff want bright neutral light during the day and a softer warm tone for evening service. The technical PDF for the 24V IP20 3014 Warm White Cool White Adjustable LED Strip Kit is available in the Documentation tab, with the certification, LED type, width, power draw, luminous flux and CRI values confirmed for this model. Review it alongside your control and power supply choices before cutting or ordering.
