24V 5M IP65+ MULTI ZONE HIGH OUTPUT RGB 5050 LED STRIP KIT - 60 LEDS/M

Name: 24V 5M IP65+ MULTI ZONE HIGH OUTPUT RGB 5050 LED STRIP KIT - 60 LEDS/M
Brand: LED MONTREAL
SKU: UL24RGBMZ300
Price: 144.97 CAD
Availability: InStock

SKU: UL24RGBMZ300

Brand: LED MONTREAL

Ready to paint a room in any colour you can imagine? The 24V 5M IP65+ Multi Zone High Output RGB 5050 LED Strip Kit - 60 LEDs/m from LED MONTREAL (SKU UL24RGBMZ300) is the all-in-one answer for anyone shopping for led strip lights, colour-changing led light strips or a complete RGB strip lighting setup. RGB stands for Red-Green-Blue, and every 5050 chip on this reel packs those three diodes together so you can mix them into an enormous palette of shades — warm sunset tones for movie night, cool blues for a gaming corner, team colours for game day. Because it is a multi zone kit, you can control different runs or different areas independently instead of forcing the whole house to share one mood. Homeowners use it under kitchen cabinets, around bedroom headboards and along stair nosings; it is also everyone's favourite trick for lighting up a basement home bar.

The reel gives you a generous 5 m of high output tape at 60 LEDs per metre, so the dots blend into a smooth line of colour rather than a string of visible points. It runs on safe low-voltage 24V, which means longer runs with less voltage drop than lower-voltage tape, and the 5050 chips throw a wide 120-degree beam that washes walls, ceilings and cabinet interiors evenly. The IP65+ rating means the strip is protected against dust and water splashes, a real advantage in kitchens, bathrooms and covered outdoor areas. The included RF remote lets you call up 250 colours at the press of a button, with no line-of-sight needed — point it from the couch, from another room, it still works. One honest note: an RGB chip does not produce a true white, so if you want both colour and a clean ambient white, an RGBW strip with a dedicated white diode is the better pick.

This kit shines in condos, basements, garages, home theatres, restaurants, salons, retail displays and trade show booths — anywhere a little colour changes the whole feeling of a space. Canadian renovators love it for cove ceilings and toe-kicks where a fixture simply will not fit, and contractors appreciate a residential and commercial ready kit that installs in an afternoon. Plan your runs, keep the power supply accessible, and use aluminum channel wherever the tape is visible for a cleaner, cooler-running finish. Add colour to your project today with this multi zone RGB kit.

Built for smooth, saturated colour
The heart of this kit is a high output RGB 5050 LED strip with 60 LEDs per metre on a 5 m flexible reel. Each 5050 chip houses a red, a green and a blue diode side by side, and the controller mixes their intensity to create an enormous range of colours — from deep saturated tones to soft pastel washes. The higher LED density matters more than people expect: with 60 LEDs per metre the individual points blur together much sooner, which is exactly what you want when the tape is aimed at a wall, tucked into a cove or mounted behind a headboard where hot spots would show. The 120-degree beam angle spreads light wide instead of pin-pointing it, so a single run can wash a surprising amount of surface.

Multi zone control and the RF remote
What sets this kit apart from a basic reel is multi zone control: you can drive separate areas independently, so the kitchen ceiling cove can sit on a calm tone while the bar niche pulses in another colour. The supplied RF remote gives access to 250 colours and, being radio frequency rather than infrared, it does not need a clear line of sight — you can operate the system from across the room, from the sofa, or from behind a cabinet door. Keep in mind the nature of RGB technology: mixing red, green and blue never produces a truly neutral white. If your project also needs a proper ambient white light, an RGBW strip that adds a dedicated white diode inside the chip is the right choice, and RGB is best kept for accent and mood work.

Technical specifications
SKU: UL24RGBMZ300
Brand: LED MONTREAL
Voltage: 24V
Length: 5 m
Density: 60 LEDs/m
Chip: 5050 RGB
Beam angle: 120 degrees
Ingress protection: IP65+
Control: multi zone, RF remote with 250 colours

Wiring, installation and compatibility
An RGB LED strip uses a four-wire connection — one shared line plus one for red, one for green and one for blue — so every connector, extension and controller you add has to be the RGB type; single-colour tape hardware will not carry all the channels. Running on low-voltage 24V makes the system comfortable to handle and allows longer runs with less voltage drop than lower-voltage tape, but the power supply still has to be sized for the total length you install and placed where air can circulate around it. The adhesive back sticks best to a clean, dry, degreased surface; wipe the mounting area with isopropyl alcohol first and press firmly along the whole run. In visible locations, an aluminum channel with a diffuser is the finishing touch — it hides the dots, protects the tape and helps pull heat away from the LEDs. Respect the strip's marked cut points and never coil unused tape on the reel while powered.

Where it earns its keep
Think under-cabinet and toe-kick lighting in a kitchen, a colour-changing halo in a tray ceiling, a home theatre step and riser wash, a gaming desk, a basement bar front, a bedroom headboard, or a display case and shelving in a boutique. Restaurants, salons, arcades and event spaces use the same tape to rebrand a room in seconds, and because the kit is rated IP65+, it also handles the damp reality of kitchens, bathrooms and covered porches far better than an unprotected reel. Sketch your runs before you buy, count your corners, and order enough connectors for each turn — a little planning makes the install fast and the result seamless.