24V 5M TO 10M IP65+ MULTI ZONE HIGH OUTPUT RGB 5050 LED STRIP KIT - 30 LEDS/M

Name: 24V 5M TO 10M IP65+ MULTI ZONE HIGH OUTPUT RGB 5050 LED STRIP KIT - 30 LEDS/M
Brand: LED MONTREAL
SKU: UL24RGBMZ510
Price: 119.97 CAD
Availability: InStock

SKU: UL24RGBMZ510

Brand: LED MONTREAL

Ready to turn a plain room into something people talk about? The 24V 5M TO 10M IP65+ MULTI ZONE HIGH OUTPUT RGB 5050 LED STRIP KIT - 30 LEDS/M from LED MONTREAL is a complete, colour-changing LED strip kit — the kind of product people look for when they type "led strip lights", "led light strips" or "ruban led 5m". You may know this style of product as an LED tape light, RGB strip, colour-changing light strip or simply a light band, and it comes as a multi zone kit so you can run from 5 m up to 10 m of strip and control more than one section of your project. RGB stands for Red-Green-Blue, and that is exactly what makes it fun: each 5050 chip holds a red, a green and a blue diode, mixed at different levels to create up to two million different colours, with 250 colours available directly from the included RF remote.

This is a high output strip built at 30 LEDs per metre and running on 24V, a low-voltage platform that keeps long runs even and easy to work with in a home or a commercial space. The 5050 RGB chips throw a wide 120-degree beam, so the light spreads and blends instead of showing a hard dotted line once it is tucked into a cove or a channel. It carries an IP65+ rating, and the strip uses a 4-wire connection — one common plus the three colour channels — which is the standard wiring for RGB tape. One honest note that will save you a callback: the RGB chip does not produce a true white. If you want colour for the mood and a clean ambient white for everyday use, an RGBW strip with a dedicated white diode inside the chip is the better pick.

Where does it shine? Under kitchen cabinets and around toe kicks, behind a bedroom headboard, along a staircase, under a floating vanity, and especially around a home bar, where the multi zone control lets you set one colour behind the bottles and another under the counter. Retail displays, salons, restaurants, gyms and games rooms love it too, and it is equally at home in basements and cold-weather Canadian garages where a low-voltage RGB LED strip is the easy way to add character without a renovation. Plan your run, pick your zones, and order SKU UL24RGBMZ510 to get the colour going.

A complete kit, not just a roll of tape
This is sold as a multi zone RGB LED strip kit, which means the strip, the controller and the RF remote are matched to work together out of the box — no guessing which controller speaks to which tape. The "5M TO 10M" in the name is the point of the kit: it is designed to cover a project from five metres up to ten metres of strip, split into more than one controllable zone. That is what makes it different from a single-zone starter kit, because a long run around a room, a bar or a media wall rarely wants the same colour everywhere at the same time.

Light quality and the 5050 RGB chip
Each 5050 chip contains three diodes — red, green and blue — and the controller mixes their intensities. Blend them and you reach up to two million colours; from the remote itself you have 250 colours on tap, plus the colour-changing effects RGB is known for. The 120-degree beam angle is what gives the strip its soft, even wash: light leaves the chip wide, so it fills a cove, a shelf or an aluminum channel instead of painting bright dots on the surface above it. Keep in mind that mixing red, green and blue gives you a "white" that reads slightly tinted; for task lighting or a neutral everyday glow, choose an RGBW strip that adds a real white diode inside the chip.

Technical specifications
SKU: UL24RGBMZ510
Brand: LED MONTREAL
Voltage: 24V
Chip type: 5050 RGB
LED density: 30 LEDs/m
Output: High output
Beam angle: 120 degrees
Ingress protection: IP65+
Kit length range: 5 m to 10 m
Control: Multi zone, RF remote (250 colours)
Colours available by mixing: up to two million
Connection: 4-wire (RGB)

Wiring and installation
Because this is a 24V low-voltage system, the strip is powered from a driver rather than wired directly to line voltage, and all connections respect the 4-wire RGB layout: a shared conductor plus one wire per colour channel. Keep polarity and channel order consistent at every joint, solder or use dedicated RGB connectors, and make sure both ends of a long run see clean power so the colours stay matched from the first metre to the last. Mount the tape on a clean, dry, degreased surface, avoid tight bends right at a chip, and let the RF receiver sit where the remote signal can reach it — behind drywall is fine for RF, but avoid burying it in metal. For the sharpest result, drop the tape into an aluminum profile with a diffuser; it hides the diodes, protects the strip and helps it run cooler.

Applications and documentation
Think under-cabinet and toe-kick lighting in a kitchen, a colour wash behind a headboard or a TV wall, staircase and hallway accents, vanity and mirror surrounds, shelving and display cases, plus commercial work: bars, restaurants, barbershops, retail windows, gyms and gaming lounges. With IP65+ protection the tape handles damp and splash-prone spots better than a bare indoor strip, which is why installers reach for it in bathrooms, basements and covered outdoor areas. No spec sheet, IES file or video is currently posted for this kit; if documentation is added, you will find it in the Documentation tab of this page. Questions about how many zones your layout needs, or how to split a 10 m run? Ask before you cut — a two-minute plan saves a lot of tape.