12V LED WORK LIGHT 36W

12V LED WORK LIGHT 36W

SKU: WRK3672

Brand: LED MONTREAL

Light up the trail, the field or the job site with a compact lamp built for abuse, not for shelves. The WRK3672 is a 12V LED work light rated at 36W — a rectangular LED spot light also known as an auxiliary light, off-road light or LED light bar pod — designed as extra lighting for trucks, tractors, ATVs, boats and heavy machinery. Its low, flat profile clears bumpers, roll bars, roof racks and equipment cabs, so it mounts where bigger lamps simply will not fit.

This 36W LED work lamp uses 12 pcs x 3W high-intensity LEDs to deliver 2500 lumens through a 60 degree spot beam, concentrating light where you point it for real distance: the end of a field, a boat ramp or the far corner of a yard. The cool white 6000K-6500K colour is close to daylight, so cables, tools and tracks stand out against dark ground. The rectangular housing measures 6.25 inch and carries an IP65 rating, shrugging off dust, rain, wash-down spray and road slush. A wide 10-30V DC input runs on 12V vehicles and 24V trucks alike, and the rated lifetime reaches 30,000 hours.

From Canadian farms and logging roads to cottages, marinas and snow-clearing routes, it earns its keep through long nights and rough weather. Typical applications include off-road rigs, 4X4 and 4WD trucks, ATVs, UTVs, SUVs, pick-ups, vans, trailers, tractors, excavators, wheel loaders, boats and yachts. Wire it through a switch with a properly sized fuse or relay, aim it slightly down, and let the WRK3672 turn darkness into a working day.

79.97$


Built tough for vehicles and machinery
The WRK3672 is a rectangular LED work light made as auxiliary lighting for vehicles and equipment. Its LED array uses 12 pcs x 3W high-intensity emitters for a total of 36W, a module approach that keeps the lamp low and flat. The housing is rated IP65, so dust, rain, wash-down spray and road slush are part of a normal working day rather than a service call. At 6.25 inch, it fits neatly on a bumper, a cab roof, a mirror bracket or a machine frame.

Light quality and beam pattern
The 60 degree spot beam concentrates output where you aim the lamp, which is what you want for reach: seeing the end of a trail, a boat ramp or the back of a lot. With 2500 lumens in cool white 6000K-6500K, close to daylight, edges, cables, tools and tracks read clearly against dark ground. Mounting a pair at different angles is a smart way to widen coverage around a tractor, a trailer hitch or a work zone.

Electrical and installation notes
The wide 10-30V DC input is the feature installers appreciate most: one part number covers 12V automotive and marine systems as well as 24V trucks and heavy equipment, and it tolerates the voltage swings that come with engine cranking and alternator charging. Wire it through a switch and an appropriately sized fuse or relay, keep the run as short as practical, and seal your connections: the lamp is IP65, and your splices should be protected too. Aim it slightly down so the beam lands where you work instead of blinding the operator or oncoming traffic, and check your provincial rules before using auxiliary lamps on public roads.

Technical specifications
SKU: WRK3672
Power: 36W
LEDs: 12 pcs x 3W high intensity
Lumens: 2500LM
Shape: rectangle, 6.25 inch
Voltage: 10-30V DC
Light angle: 60 degree spot beam
Waterproofing: IP65
Type of white: cool white 6000K-6500K
Life time: 30,000 hours

Where it earns its keep
Typical applications include off-road, 4X4 and 4WD vehicles, ATVs, UTVs, SUVs, trucks, pick-ups, vans, trailers, project vehicles, tractors, excavators, wheel loaders, boats, yachts and motorcycles. It is equally handy on a farm, a forestry road or a snow-plow route. The technical spec sheet is available in the Documentation tab.
Top