From a straight line to a lighting grid
Most track installations start with a single straight run, then quickly hit a limit: the light stops where the track stops. The track X connector XC6104-BN removes that limit by joining four track sections at right angles in a cross configuration. From one central hub, four branches of track lighting leave toward the four sides of the room, so you can aim heads at a kitchen counter on one side, a dining table on the other, a bookcase and an entry at the same time. Add more connectors and the cross becomes a grid that covers a whole commercial space.
Low profile, solid connection
The connector follows a low-profile aesthetic design that keeps the junction discreet and in proportion with the track itself. Inside, solid conductors provide a quadruple track line power connection: power arriving at the hub continues through all four sections, and every head on every branch is energized. The part is cULus listed. For installation, switch the circuit off at the breaker, push each track section fully into the connector, and rely on a qualified electrician who follows the local electrical code.
The brushed nickel look
Brushed nickel is a safe choice for transitional and contemporary interiors. It is less stark than white on a coloured ceiling and softer than black in a bright room, and it echoes the faucets, handles and appliances found in many Canadian kitchens and bathrooms. Matching the brushed nickel track connector to brushed nickel track and heads gives a coordinated, high-end result. The same X connector is also available in black and in white for other colour schemes.
Where it makes the difference
In a condo with an open living area, a single X connector placed near the centre can feed four short runs toward the kitchen, the dining table, the sofa and a feature wall. In a boutique or a pharmacy, several crosses create a grid that lets staff move heads as displays change. In a clinic or an office reception, the four branches light the desk, the waiting area, signage and artwork. The manufacturer states that its track system is compatible with all of its track, accessories and connectors, so straight joints, corner connectors and heads from the same line all fit into the plan.
Planning and upkeep
Mark the power feed and the position of the hub on your ceiling plan first, then measure each branch and list the track sections and connectors you need. After installation, the cross connector only needs an occasional wipe with a soft, dry cloth, power off. Keep the XC6104-BN as the fixed centre of your layout and simply move or add track heads when your needs change.
