LED WALL WASHER STRIP 24W/M

Name: LED WALL WASHER STRIP 24W/M
Brand: LEDCO
SKU: LCLS24V-OPT-24W-30K-IP22
Price: 114.97 CAD
Availability: InStock

SKU: LCLS24V-OPT-24W-30K-IP22

Brand: LEDCO

Turn a plain wall into the best feature of the room. This is a LED wall washer strip, a high-output LED strip light built to graze and wash vertical surfaces with a smooth, even sheet of light instead of the dots and hot spots you get from cheap tape. People look for it as led strip lights, led strip lighting, strip lights, led ceiling lights strip, ruban LED or bande LED, and it does exactly what those searches are really after: continuous, linear, hideable illumination you can run in coves, along ceiling perimeters, behind headboards, under cabinets, inside millwork, in stair nosings, or above a feature wall in stone, brick, wood slat or plaster. Because it is a flexible tape, you cut it, bend it around corners and tuck it into an aluminum channel, so the wall glows and the source disappears.

Here are the real numbers for this one. It is a 24W per metre LED strip running on low-voltage 24V DC, a wattage density that puts it firmly in the high-output class — enough punch to light a full-height wall from floor to ceiling, not just add a soft accent line. The rating is IP22, which means it is made for dry, protected indoor locations: coves, soffits, closed millwork, interior ceilings. The colour is warm white, the tone most homeowners and designers choose for living spaces and hospitality rooms because it flatters wood, warm paint, brick and skin tones. The SKU is LCLS24V-OPT-24W-30K-IP22, and the full technical PDF is available in the Documentation tab of this page so your electrician or integrator has the exact values before the drywall closes up.

It shines in living rooms and basements with a stone or panelled feature wall, primary bedrooms, restaurant and hotel corridors, retail displays, showrooms, office lobbies and reception desks — anywhere a Canadian renovation needs to feel warm and finished without adding more pot lights. Since it runs on low voltage, it pairs with a 24V driver or power supply sized to the total run, and it lives happily inside an aluminum profile with a diffuser lens. If you need the same warm family in other outputs or in a wet-location version, look at the LED strip 24V 4.8W/m IP22, the LED strip 19.2W/m 24V IP66 or the colour-changing RGB LED strip 14.4W/m IP22. Plan your run, order your length, and let the wall do the talking.

Built for washing walls, not just lining them
Most tape light is designed to be seen as a thin accent line. A wall washer strip is designed to throw light across a surface, so the whole wall reads as a soft gradient from top to bottom. That takes density and output, and this tape delivers it at 24W per metre on a flexible circuit board you can cut at the marked points, solder or connect, and curve around inside corners. Mount it in a recessed or surface aluminum LED channel with a frosted lens and the individual diodes blend into one continuous line of light — that is the difference between a professional cove and a visible string of dots.

Technical specifications
SKU: LCLS24V-OPT-24W-30K-IP22
Type: LED wall washer strip / flexible LED tape
Power: 24W per metre
Input voltage: 24V DC (low voltage)
Light colour: warm white
Protection rating: IP22 (dry, protected indoor locations)
Documentation: technical spec sheet (PDF) in the Documentation tab

Electrical and installation notes
Because this is a 24V DC product, it never connects directly to line voltage. You feed it from a low-voltage LED driver or power supply whose output matches the total load of your run: multiply 24W by the number of metres you are installing, then keep headroom on the driver so it is not working at its limit. Long runs are best fed from both ends or split into several circuits to avoid the brightness drop you see at the far end of an overloaded tape. Clean the mounting surface before applying the adhesive back, and use the channel's own clips or the tape's adhesive inside the profile. With an IP22 rating, keep it in dry protected areas — coves, ceiling soffits, closed cabinetry, drywall reveals — and choose an IP66 tape for anything exposed to splashes, damp or outdoor conditions.

Where it earns its keep
Concrete examples from real projects: a basement feature wall in cultured stone with the tape hidden in a ceiling reveal so the texture pops; a hotel corridor where continuous cove light replaces a row of downlights and makes the hallway feel taller; a retail wall of shelving washed evenly so every product is equally lit; a restaurant banquette with a warm glow behind the backrest; a home office with indirect ceiling light that kills screen glare; a millwork bulkhead in a kitchen where the tape washes the upper cabinets. In Québec and across Canada, this kind of indirect ruban LED layer is what makes a renovation feel designed rather than simply lit, and it draws far less energy than the halogen cove lighting it replaces.

Compatibility and the rest of the family
Any 24V driver, 24V dimming system, aluminum profile, end cap, connector or mounting clip made for 24V flexible tape of the matching width will work with this strip. Within the same warm white family you can mix outputs on different surfaces: the discreet LED strip 24V 4.8W/m IP22 for shelves and shallow coves, the LED strip 9.6W/m 24V IP66 or LED strip 19.2W/m 24V IP66 where moisture is a concern, and the LED strip 20W/m 24V CCT when the client wants to tune the colour temperature. Download the spec sheet from the Documentation tab before you cut, and build your lighting plan with confidence.

Technical Files