LED STRIP 19.2W/M (RGBW) - LCLS24V-96W-RGBW40K-IP66

Name: LED STRIP 19.2W/M (RGBW) - LCLS24V-96W-RGBW40K-IP66
Brand: LEDCO
SKU: LCLS24V-96W-RGBW40K-IP66
Price: 114.97 CAD
Availability: InStock

SKU: LCLS24V-96W-RGBW40K-IP66

Brand: LEDCO

Colour, warmth and brightness on a single reel — that's the promise of this RGBW LED strip, SKU LCLS24V-96W-RGBW40K-IP66. Also called LED strip lighting, LED tape light, LED light strips or simply strip lights, it combines red, green and blue chips with a dedicated 4000K white channel, so you get true, usable task light when you want it and full colour when it's time to set a mood. Homeowners use it for cove lighting, under-cabinet runs, toe-kicks, stair nosings, headboards, bar fronts and ceiling coves; contractors and small businesses reach for it to wash a feature wall, outline a reception desk or add signature colour to a restaurant, salon or showroom. One continuous run replaces a string of fixtures and gives you that clean, seamless line of light people search for when they ask for LED ceiling lights strip or indoor LED lighting.

The numbers behind the glow: 19.2W/m (±10%) with 60 LEDs per meter for a dense, even line, a CRI of 90+ so wood grain, paint, skin tones and merchandise look the way they should, and a 120° beam angle that spreads light smoothly instead of spotting. It runs on 24V DC, which means longer runs with less voltage drop, and it is dimmable. The PCB is 12 mm wide with 3 oz copper for better heat management, the maximum run is 10 m, and it can be cut every 100 mm to fit your exact layout. It is UL listed and rated for 50,000+ hours of life. This version carries an IP66 rating, the waterproof build of the family, so damp and splash-prone spots don't scare it.

It shines in kitchens, basements, bathrooms and finished garages, in retail displays, restaurants, gyms, offices and covered outdoor features where Canadian humidity and temperature swings are part of the job. Pair it with a 24V DC driver sized for your total run, an RGBW controller and remote, and an aluminum channel with diffuser for a perfectly even line. Need matching runs in other colours or outputs? See the LED strip 14.4W/m 24V 72W RGB IP66 for pure colour, the LED strip 19.2W/m 24V 96W 30K IP66 for warm white at the same output, or the LED strip 20W/m 24V 100W IP22 CCT for tunable white. Measure your run, add it to your project and light it your way.

Built to run long and look clean
This RGBW LED tape light is built on a 12 mm wide PCB with 3 oz copper, a heavier copper weight that pulls heat away from the diodes and helps the strip hold its colour and output over time. With 60 LEDs per meter the dots sit close together, so once you drop the strip into an aluminum channel with a frosted lens you get a continuous line rather than a row of hot spots. Cut marks every 100 mm let you trim a run to the exact length of a cabinet, a cove or a stair stringer, and the IP66 construction of this version seals the strip against dust and water jets — the right choice for bathrooms, kitchens backsplashes, covered patios and anywhere wipe-downs happen.

Four channels, real white light
Plenty of colour strips fake white by mixing red, green and blue. This one doesn't: it adds a dedicated 4000K white channel, a crisp neutral white that reads clean in kitchens, workspaces and retail. With CRI 90+, colours stay honest — countertops, cabinetry, food, fabric and product packaging look natural instead of washed out. The 120° beam angle spreads light wide and soft, which is exactly what you want when the strip is tucked into a cove, under a cabinet lip or behind a valance and you're bouncing light off a surface. Use the white channel for everyday task and accent lighting, then bring in RGB for holidays, events, branding colours or a bit of evening atmosphere.

Technical specifications
SKU: LCLS24V-96W-RGBW40K-IP66
Power: 19.2W/m ±10%
LEDs per meter: 60 pcs
Colour: RGBW with 4000K white channel
CRI: 90+
Beam angle: 120°
Voltage: 24V DC
Dimmable: Yes
PCB width: 12 mm
PCB thickness: 3 oz
Maximum run length: 10 m
Cut size: 100 mm
Protection rating: IP66
Certification: UL
Lifespan: 50,000+ hours

Wiring and installation
The strip runs on 24V DC, so you'll need a low-voltage driver sized for the load: multiply 19.2 W by your total length in meters, then leave headroom on the driver. Because this is a four-channel product, the control chain is driver, then RGBW controller (a five-wire output: common plus R, G, B and W), then the strip — a very common search around here is for an RGBW remote, and that's exactly the type of controller this tape needs. Respect the 10 m maximum run from a single feed; for longer installations, run parallel home runs back to the power supply instead of daisy-chaining, which keeps brightness and colour consistent end to end. Cut only on the marked 100 mm points, solder or use quality four-channel connectors, and mount in an aluminum profile — recessed, surface or corner — for heat dissipation and a finished look. The strip is dimmable through a compatible low-voltage control system.

Where it earns its keep, and what else to look at
Think kitchen coves and under-cabinet runs, basement bulkheads, stair and hallway accents, a bar or island front, hotel corridors, salon mirrors, gym feature walls, restaurant ceilings and retail display cases that need to change colour for a season or a promotion. For matching or alternative runs, compare the LED strip 14.4W/m 24V 72W RGB IP66, the same-output white version LED strip 19.2W/m 24V 96W 30K IP66, the gentler LED strip 9.6W/m 24V 48W 30K IP66 for cabinet interiors, or the tunable LED strip 20W/m 24V 100W IP22 CCT. The full technical PDF for this model is in the Documentation tab — download it before you spec your driver and channel.

Technical Files