LED WALL WASHER STRIP 24W/M - 10M

Name: LED WALL WASHER STRIP 24W/M - 10M
Brand: LEDCO
SKU: LCLS24V-OPT-24W-30K-IP22-10M
Price: 225.97 CAD
Availability: InStock

SKU: LCLS24V-OPT-24W-30K-IP22-10M

Brand: LEDCO

Some projects need more than a thin line of light — they need a wall bathed evenly from top to bottom. That's exactly what this LED wall washer strip was built for. Known on job sites as LED strip lighting, LED tape light, ribbon light or simply led light strips, this optic wall washer version spreads its beam sideways instead of shooting it straight out, so cove ceilings, feature walls and display backdrops light up smoothly without the hot spots and scallops you get from ordinary tape. It arrives as one continuous 10 m reel, ready to be cut at the marked cut points and run along a ceiling cove, a soffit, a bulkhead or the inside of a niche.

The important numbers are simple to work with. This strip draws 24W per metre on a 24V low-voltage DC supply, and the colour is a warm 3000K white — the tone most homeowners and designers pick for living rooms, hotel lobbies, restaurants and retail walls where the light has to feel inviting rather than clinical. Its IP22 rating makes it an indoor product, perfect for dry, conditioned interiors such as ceilings, coves, millwork and display cases. The full reel measures 10M, enough to wash a long hallway or several rooms from a single order, and the low-voltage design means you can run it safely behind wood, drywall returns and aluminum extrusions. The SKU is LCLS24V-OPT-24W-30K-IP22-10M.

This is a favourite for basement renovations, condo living rooms, boutique change rooms, restaurant feature walls, dental and medical waiting areas, office reception backdrops and any Canadian project where a cove needs to glow instead of glare. Because it runs on the same 24V platform as the rest of the family, it pairs naturally with our other 24V tapes such as the LED strip 20W/m 24V 100W IP22 (CCT) for tunable areas, the LED strip 14.4W/m 24V 72W RGB IP22 for colour accents, or the LED strip 24V 2835 4.8W/m IP22 3000K for lighter accent runs. Plan your cove, add a 24V driver, and give your walls the even, warm glow they deserve.

Built for washing surfaces, not just lining them
A standard tape light points its diodes straight up, which is great for hiding a source but poor at painting a wall. This LED wall washer strip uses an optic that throws the light out at an angle, so from a cove or a ceiling recess the beam reaches down the wall and fades gradually instead of stopping in a hard band. On a flexible circuit board you get the same easy handling as regular LED tape light: it bends along curves, follows bulkheads and slips inside aluminum channel, while delivering a far more even wall gradient. For architectural coves, feature walls, stairwell walls and retail backdrops, that difference is what separates a finished look from a DIY look.

Warm light people actually like
The 3000K colour temperature is warm white — the same family of tone people associate with comfortable living rooms, restaurants and hospitality spaces. It flatters wood, paint, plaster, stone and fabric, and it blends with the warm downlights already used in most Canadian homes and commercial fit-outs. Because the light is spread rather than concentrated, plaster and drywall imperfections are far less likely to be exaggerated than with a narrow grazing beam, which makes it a smart choice on painted feature walls and long corridor runs.

Technical specifications
SKU: LCLS24V-OPT-24W-30K-IP22-10M
Type: LED wall washer strip (optic)
Power: 24W per metre
Voltage: 24V DC
Colour temperature: 3000K
Protection rating: IP22 (indoor use)
Reel length: 10M

Electrical and installation notes
This is a low-voltage 24V product, so it needs a DC driver sized for the total load: multiply the 24W per metre by the length you actually install, then choose a driver with headroom. Cut only at the printed cut marks, feed longer runs from both ends or in sections rather than daisy-chaining one very long line, and keep the tape on a clean, dry, degreased surface for good adhesion. Mounting it inside an aluminum extrusion helps with heat management and gives you a crisp, professional edge; a diffuser lens softens the source further when the strip could be seen from the room. Since the rating is IP22, keep it out of showers, exteriors and any spot exposed to spray or washdown — for those areas, choose a sealed version like the LED strip 19.2W/m 24V 96W 30K IP66 or the LED strip 9.6W/m 24V 48W 30K IP66.

Where it earns its keep, and what pairs with it
Think of a basement renovation where the cove around the ceiling turns a low room into a bright, open space; a boutique where the back wall glows evenly behind the merchandise; a restaurant where a textured feature wall becomes the focal point; a condo hallway that needs light without a row of visible fixtures. In a multi-zone project, this warm 3000K wall washer works alongside the LED strip 17W/m 24V dim to warm IP22 for lounge areas and the LED strip 14.4W/m 24V 72W RGB IP22 for colour scenes, all on the same 24V platform. Note that no spec sheet, IES file or installation video is posted in the Documentation tab for this item — so plan your run length, driver capacity and channel type before ordering, and reach out with your cove dimensions if you want a second set of eyes on the layout.