LED STRIP 19.2W/M (RGBW) - LCLS24V-96W-RGBW40K-IP66-30M

Name: LED STRIP 19.2W/M (RGBW) - LCLS24V-96W-RGBW40K-IP66-30M
Brand: LEDCO
SKU: LCLS24V-96W-RGBW40K-IP66-30M
Price: 675.97 CAD
Availability: InStock

SKU: LCLS24V-96W-RGBW40K-IP66-30M

Brand: LEDCO

Colour and clean white light on the same reel — that's the beauty of this RGBW LED strip. Known as LED strip lights, LED light strips, LED tape or simply strip lighting, this 24V flexible ribbon combines red, green and blue diodes with a dedicated 4000K white chip, so you can set a warm party mood one evening and switch to crisp, usable task light the next morning. It's the go-to solution for cove ceilings, under-cabinet lighting, toe kicks, stair nosings, backlit millwork, display cases, bars, signage and any place you want a clean, continuous line of light instead of a row of visible fixtures. SKU LCLS24V-96W-RGBW40K-IP66-30M.

Each metre packs 60 LEDs for a smooth, dotless-looking run, drawing 19.2W per metre on 24V DC — a low-voltage platform that's safer and easier to run through cabinetry and millwork than line voltage. The CRI 90+ rating means skin tones, wood grain, paint colours and merchandise look true, not washed out, and the 120° beam angle spreads light evenly across the surface above or below it. The strip is dimmable, UL listed, and rated for 50,000+ hours of life. The PCB is 12 mm wide with a 3 oz copper build for better heat management and colour stability over long runs, cuttable every 100 mm, with a maximum run of 10 m per feed. White light is 4000K neutral white.

From a Montréal condo kitchen to a retail counter in Calgary, this tape does double duty: everyday white light plus colour when you want it. Designers love it in cove mouldings, floating vanities, headboards, home theatres, restaurant bars, gyms and reception desks. Pair it with a 24V DC driver, an RGBW controller and an aluminum channel with diffuser for a finished, glare-free line. Need plain white instead? See the LED strip 19.2W/m 24V 96W 30K IP66, the softer LED strip 9.6W/m 24V 48W 30K IP66, or pure colour with the LED strip 14.4W/m 24V 72W RGB IP66. Plan your run, order your length and light it up.

Built for long, clean runs
This flexible LED tape is built on a 12 mm wide PCB with 3 oz copper, a heavier copper weight that pulls heat away from the diodes and keeps light output and colour consistent from the first metre to the last. With 60 LEDs per metre and a 120° lighting angle, the light blends quickly into a smooth band once it's set behind a diffuser or inside a cove, instead of showing hot spots. The strip can be cut every 100 mm at the marked points, so you can tailor each section to a cabinet, a stair riser or a soffit without wasting material.

Colour plus true white
RGBW means four channels: red, green and blue for colour scenes, plus a dedicated 4000K white diode for real, usable neutral white light. That's a big step up from RGB-only tape, where "white" is mixed from the three colours and never looks quite right. With a CRI of 90+, whites stay white, wood stays warm and merchandise or food looks the way it should — exactly what you want above a kitchen counter, in a display case or behind a bar.

Technical specifications
SKU: LCLS24V-96W-RGBW40K-IP66-30M
Power: 19.2W/m ±10%
LEDs per metre: 60 pcs
Voltage: 24V DC
White colour temperature: 4000K
CRI: 90+
Beam angle: 120°
Dimmable: Yes
PCB width: 12 mm
PCB thickness: 3 oz.
Cut size: 100 mm
Maximum run length: 10 m
Lifespan: 50,000+ hours
UL: Yes

Wiring and installation
Because it runs on 24V DC, this strip needs a low-voltage driver sized to the total load: multiply 19.2W by the number of metres you're installing and leave headroom. Respect the 10 m maximum run per power feed — longer installations should be split and fed separately (or fed from both ends) to avoid voltage drop and colour shift at the far end. An RGBW controller with four output channels is required to drive the colour and white channels; the strip is dimmable through compatible low-voltage dimming gear. Mount it on a clean, dry, degreased surface, and for a finished look, set it in an aluminum extrusion with a frosted lens — the channel also acts as a heat sink and protects the tape from knocks in cabinetry and stairwells.

Where it works and what's in the same family
Cove ceilings in a living room, under-cabinet and toe-kick lighting in kitchens, vanity and mirror surrounds, home theatres, headboards, closets, retail shelving, bar fronts, restaurant booths, reception desks, gym feature walls and backlit signage all suit this RGBW strip. If a project needs fixed white only, the family includes the LED strip 19.2W/m 24V 96W 30K IP66 and the entry-level LED strip 4.8W/m 24V 24W 30K IP66; for tunable white there's the LED strip 20W/m 24V 100W IP22 CCT, and for colour-only scenes the LED strip 14.4W/m 24V 72W RGB IP22. The full technical spec sheet for this model is available in the Documentation tab — download it for your electrician, your designer or your permit file.

Technical Files