LED STRIP 19.2W/M

Name: LED STRIP 19.2W/M
Brand: LEDCO
SKU: LCLS24V-96W-27K-IP22-30M
Price: 522.97 CAD
Availability: InStock

SKU: LCLS24V-96W-27K-IP22-30M

Brand: LEDCO

Turn a plain ceiling cove, a run of cabinets or a staircase into something people notice with this 24V LED strip rated 19.2W per metre. Sold as a 30 m roll under SKU LCLS24V-96W-27K-IP22-30M, it's the flexible LED tape light people look for when they search "led strip lights", "led lighting strips" or "led ceiling lights strip" — the same product also called a LED ribbon, light tape or strip lighting. Its warm 2700K glow is the one you want for cozy, lived-in spaces: under upper cabinets in a kitchen, inside a coffered ceiling, along a bar front, under a floating vanity, behind a headboard, in display cases and reception millwork. Residential renovations, restaurants, boutiques, hotel corridors — anywhere you want light without seeing the fixture.

Under the silicone-free surface sit Epistar 2835 SMD chips, 128 LEDs per metre, so the line of light reads smooth instead of dotty once you tuck it in a channel. Efficiency is rated at 120 lm/W and colour rendering at CRI 90+, which means wood grain, paint, skin tones and merchandise keep their true colour — a real difference over cheap tape. The 120° beam angle spreads light wide across a wall or backsplash, the 10 mm PCB with 3 oz copper handles heat and long runs, and the strip is dimmable on 24V DC. It is UL listed, carries an IP22 rating for dry indoor use, cuts every 62.5 mm (8 LEDs), runs up to 10 m maximum per run, and is rated for 50,000+ hours of service.

This 30 m roll is made for real jobs: a full kitchen and island in one house, an entire restaurant ceiling perimeter, office millwork, retail shelving, a basement renovation, or a contractor's stock spool ready for the next call. It pairs with a 24V DC driver and, ideally, an aluminum channel with diffuser — a search Quebec pros make constantly. Prefer a different white? The same strip is offered in LED strip 24V 19.2W/m IP22 3000K, 3500K, 4000K and 5000K. Roll out your light line and make the room glow.

Built for smooth, continuous light
This LED strip light uses Epistar 2835 SMD diodes at a density of 128 LEDs per metre, which is what gives the run its even, ribbon-like appearance rather than a row of visible dots. The flexible circuit board measures 10 mm wide with a 3 oz copper thickness — heavier copper spreads heat away from the diodes and keeps voltage steady over longer runs, a detail that separates project-grade tape from disposable kits. Cut marks fall every 62.5 mm (8 LEDs), so you can size each section to a cabinet, a riser or a cove without wasting material.

Light quality that flatters the room
At 2700K, the colour temperature is a warm, incandescent-like white — the right choice for kitchens with wood or warm-toned cabinetry, bedrooms, dining rooms, lounges and hospitality spaces. Colour rendering is CRI 90+, so finishes, textiles, food and merchandise look the way they should under the light. Output is rated at 120 lumens per watt for 19.2W per metre, and the 120° beam angle washes surfaces evenly instead of punching a narrow stripe, which is exactly what you want for a backsplash, a cove or a toe-kick.

Technical specifications
SKU: LCLS24V-96W-27K-IP22-30M
Chip: Epistar 2835 SMD
LEDs per metre: 128 pcs
Power: 19.2W/m ±10%
Efficacy: 120 lm/W
CRI: 90+
Colour temperature: 2700K
Beam angle: 120º
Voltage: 24V DC
Dimmable: Yes
PCB width: 10 mm
PCB thickness: 3 oz
Maximum run length: 10 m
Cut size: 62.5 mm (8 LEDs)
Protection rating: IP22
Certification: UL
Lifespan: 50,000+ hours

Wiring, dimming and installation
The strip runs on 24V DC and must be powered by a suitable LED driver sized to the total load of your run — remember to count 19.2W for every metre installed, plus headroom. Respect the 10 m maximum run: beyond that, feed additional sections from the driver rather than extending end to end, otherwise you'll see the far end dim. The strip is dimmable when used with a compatible dimmable driver and control. Its IP22 rating means dry, protected indoor locations only — inside millwork, coves, closets and ceilings, not outdoors, not in a shower. Clean and degrease the surface before applying, mount into an aluminum channel with a diffuser whenever the strip may be seen directly, and solder or use proper connectors at cut points for a lasting joint.

Applications, alternatives and documentation
A 30 m roll covers big scopes in one shot: perimeter cove lighting in an open-concept main floor, under-cabinet and under-counter lighting throughout a kitchen, retail shelving and display cases, restaurant bar fronts, hotel corridors, office reception millwork, stair nosings and basement renovations. If your project calls for a neutral or cool white instead, the identical platform is available as LED strip 24V 19.2W/m IP22 3000K or 4000K; for damp or exposed areas, the same 19.2W/m output exists in a sealed version, LED strip 19.2W/m 24V 96W 30K IP66, and a lower-output LED strip 24V 4.8W/m IP22 suits subtle accent work. The complete technical spec sheet for this product is available in the Documentation tab of this page.

Technical Files