LED STRIP 19.2W/M - LCLS24V-96W-27K-IP66

Name: LED STRIP 19.2W/M - LCLS24V-96W-27K-IP66
Brand: LEDCO
SKU: LCLS24V-96W-27K-IP66
Price: 106.97 CAD
Availability: InStock

SKU: LCLS24V-96W-27K-IP66

Brand: LEDCO

Some rooms just need a line of light instead of another fixture on the ceiling — and that is exactly what this LED strip delivers. Known on the job site as LED strip lighting, LED tape, LED light strips or simply strip lights, model LCLS24V-96W-27K-IP66 is a high-output 24V flexible tape built for real projects, not gadgets. Homeowners use it for cove lighting, under-cabinet lighting in the kitchen, toe-kick and stair accents, closets, headboards and bathroom mirrors; contractors and small businesses run it in display cases, reception desks, backbars, signage boxes and long ceiling coves where a continuous line of light beats a row of individual fixtures.

Under the silicone you get Epistar 2835 SMD chips — 128 LEDs per meter — pulling 19.2W/M (±10%) at an efficiency of 120 LM/W, so the light output is strong enough to be the main source in a cove, not just a glow. The 2700K colour temperature gives a warm, inviting tone that flatters wood, stone and skin tones, while the CRI 90+ rendering keeps finishes, fabrics and food looking true. The 120º beam angle spreads smoothly along the run, the strip is dimmable, and it runs on safe 24V DC. The PCB measures 10mm wide with 3oz. copper for steady performance over long runs, with a max length of 10m per run and a cut size of 62.5mm (8 LEDS). It is UL listed, rated IP66 and rated for 50 000+ hours of service.

With its IP66 protection, this tape handles the damp, dusty and splash-prone spots that a standard strip can't: bathrooms and shower niches, kitchen backsplashes, basements, garages, workshops, walk-in coolers and covered patios — a real advantage in Canadian homes where humidity swings with the seasons. It pairs with a 24V DC driver and works beautifully inside an aluminum channel, which hides the diodes and diffuses the line. Need another mood for the same project? The same tape exists in LED strip 19.2W/M 24V 96W 30K IP66, and lower-output companions include LED strip 9.6W/M 24V 48W 30K IP66 and LED strip 4.8W/M 24V 24W 30K IP66. Roll out your line of warm light — order the 2700K IP66 strip today.

Built for long, clean runs
This 24V LED tape uses Epistar 2835 SMD diodes at a density of 128 pcs per meter, which is what kills the "dotting" effect when the strip is installed close to a surface or behind a shallow diffuser. The flexible PCB is 10mm wide — narrow enough to slip into most aluminum profiles — and uses 3oz. copper, a heavier conductor that helps keep voltage and colour consistent from the first LED to the last. The IP66 jacket seals the circuit against dust and water jets, so the tape can live in rooms where steam, splashes and sawdust are part of daily life.

Warm, high-fidelity light
At 2700K, the light lands in classic warm-white territory: cozy, residential, the tone most people associate with a relaxing room at night. What sets this tape apart is CRI 90+, a high colour rendering index that keeps whites clean and reds rich — critical over kitchen counters, in retail display cases, in bathrooms where makeup is applied, and anywhere finishes were chosen carefully. Output is rated at 19.2W/M ±10% with an efficiency of 120 LM/W and a 120º beam angle for an even wash along walls and ceilings.

Technical specifications
Model: LCLS24V-96W-27K-IP66
Chip: Epistar 2835 SMD
LEDs per meter: 128pcs
Power: 19.2W/M ±10%
Efficiency: 120 LM/W
Colour temperature: 2700K
CRI: 90+
Beam angle: 120º
Voltage: 24V DC
Dimmable: Yes
PCB width: 10mm
PCB thickness: 3oz.
Max length: 10m
Cut size: 62.5mm (8 LEDS)
Protection rating: IP66
Certification: UL
Lifespan: 50 000+ hours

Wiring, cutting and dimming
Plan the installation around three numbers. First, 24V DC: the strip must be fed by a 24V DC power supply sized for the total wattage of your run — at 19.2W per meter, a five-meter run draws roughly 96W before any safety margin, so choose a driver with headroom. Second, the max length of 10m per run; longer installations should be split and home-run back to the supply rather than daisy-chained end to end. Third, the cut size of 62.5mm (8 LEDS): cut only on the marked copper pads, then solder or use a compatible connector, and reseal the cut end on this IP66 version to preserve the rating. The tape is dimmable, so pair it with a 24V-compatible dimming driver or controller to take a bright cove down to a soft evening level.

Where it works, and what pairs with it
Think crown-moulding coves in a living room, under-cabinet task light over a quartz counter, a lit toe-kick in a mudroom, stair nosing in a finished basement, a backlit bathroom mirror, illuminated shelving in a boutique, or a glowing bar front in a café. Same family, different look: LED strip 19.2W/M 24V 96W 30K IP66 for a slightly crisper white, LED strip 14.4W/M 24V 72W RGB IP66 for colour-changing accents, or the indoor IP22 version of this exact tape, LED strip 24V 19.2W/M IP22 2700K, for dry areas. Full details, dimensions and ratings are in the technical spec sheet available in the Documentation tab of this page.

Technical Files