LED STRIP 14.4W/M (RGB) - LCLS24V-72W-RGB-IP66-30M

Name: LED STRIP 14.4W/M (RGB) - LCLS24V-72W-RGB-IP66-30M
Brand: LEDCO
SKU: LCLS24V-72W-RGB-IP66-30M
Price: 424.97 CAD
Availability: InStock

SKU: LCLS24V-72W-RGB-IP66-30M

Brand: LEDCO

Turn any room into a colour show with an RGB LED strip that installs in minutes and changes the whole mood at the touch of a button. Also called LED strip lighting, LED light strips, LED tape or ribbon light, this flexible 24V LED strip (SKU LCLS24V-72W-RGB-IP66-30M) puts red, green and blue diodes on one slim circuit board so you can wash a ceiling cove in deep blue, set a warm accent behind a headboard, or match your brand colour in a storefront window. It's a favourite for cove and crown-moulding lighting, under-cabinet and toe-kick accents, stair and hallway runs, bar fronts, display cases, home theatres and signage — anywhere people search for led ceiling lights strip or simple indoor LED lighting that does more than plain white.

The real numbers back up the fun. This strip draws 14.4W per metre (±10%) on 24V DC, packing 60 LEDs per metre for a smooth, dense line of colour instead of visible dots. Colour rendering is rated CRI 90+, so materials, wood tones and paint still look honest when you run it in white-adjacent settings, and the 120º beam angle spreads light evenly across the surface you're grazing. The PCB measures 10 mm wide with 3 oz copper for better heat handling and longer life, and the strip is dimmable with a rated lifespan of 50 000+ hours. It is UL listed, can be cut every 1000 mm at the marked points, and supports runs up to a maximum length of 10 m per feed.

From a Montréal condo renovation to a café counter in Calgary, this RGB LED tape earns its place in kitchens, basements, home gyms, salons, restaurants, retail displays and reception desks. It needs a 24V DC driver sized to your total load plus an RGB controller to run the colours, and it pairs naturally with the rest of the family, including the IP22 version LED strip 14.4W/m 24V 72W RGB IP22 and LED strip 14.4W/m 24V 72W RGB IP66. Add colour to your next project — pick your length and start planning the run.

Built to bend, built to last
This flexible LED strip is built on a 10 mm wide PCB with 3 oz copper, a heavier copper weight that pulls heat away from the diodes and helps the strip hold its output over time. With 60 LEDs per metre, the red, green and blue emitters sit close enough together to blend into a continuous line of colour rather than a row of dots, especially when you run it inside an aluminum channel with a frosted diffuser. The strip rolls out along curved coves, wraps around columns and tucks into millwork reveals, and it can be cut to length at the marked 1000 mm intervals so a run finishes exactly where you want it.

Colour and light quality
RGB means the strip mixes red, green and blue to produce a full palette of saturated colours through a compatible RGB controller — think game-day colours in a basement, seasonal tones in a storefront, or a slow fade behind a bar. The CRI 90+ rating means high-fidelity colour rendering, a real advantage when the light grazes wood, stone, fabric or painted drywall. The 120º beam angle spreads the output wide, which is why the strip works best mounted close to the surface it lights or behind a diffuser that softens the individual diodes.

Technical specifications
SKU: LCLS24V-72W-RGB-IP66-30M
Colour: RGB
Power: 14.4W/m ±10%
Voltage: 24V DC
LEDs per metre: 60 pcs
CRI: 90+
Beam angle: 120º
PCB width: 10 mm
PCB thickness: 3 oz
Cut size: 1000 mm
Maximum run length: 10 m
Dimmable: Yes
Lifespan: 50 000+ hours
Certification: UL

Wiring, dimming and installation
The strip runs on 24V DC, so it needs a low-voltage driver sized for the total wattage of your run, plus a little headroom, and an RGB controller between the driver and the tape to handle colour changes. Multiply 14.4W by the number of metres you plan to install to size the supply, and respect the maximum length of 10 m per feed — longer installations should be split into separate runs fed from the source rather than daisy-chained end to end, which is the classic cause of colour drift at the far end. Clean the mounting surface before sticking the tape down, cut only on the marked 1000 mm cut lines, and use solderless connectors or soldered leads at corners. Because the strip is dimmable, you can pair it with compatible low-voltage dimming on the driver side to fine-tune the intensity once the colour is set.

Where it works and what's in the Documentation tab
Contractors use this RGB LED tape for cove lighting in living rooms and hotel corridors, under handrails on stairs, behind bathroom mirrors, inside display cases and toe-kicks, along bar fronts and reception desks, and in home theatres where colour sets the mood. If your project calls for fixed white light instead of colour, the same family offers single-colour options such as the LED strip 9.6W/m 24V 48W IP66 and the brighter LED strip 19.2W/m 24V 96W IP66, while LED strip 20W/m 24V 100W IP22 CCT lets you tune the white. The full technical PDF spec sheet for this SKU is available in the Documentation tab — download it for the complete specifications before you order your run.

Technical Files