LED STRIP 19.2W/M (RGBW) - LCLS24V-96W-RGBW27K-IP22-30M

Name: LED STRIP 19.2W/M (RGBW) - LCLS24V-96W-RGBW27K-IP22-30M
Brand: LEDCO
SKU: LCLS24V-96W-RGBW27K-IP22-30M
Price: 594.97 CAD
Availability: InStock

SKU: LCLS24V-96W-RGBW27K-IP22-30M

Brand: LEDCO

Colour and comfort on the same reel: this RGBW LED strip gives you millions of colours plus a real 2700K warm white, all in one 12 mm tape. People search for it as led strip lights, led light strips, led strip lighting or simply strip lights — and this one (SKU LCLS24V-96W-RGBW27K-IP22-30M) is the version made for people who want mood colour at night and clean, usable white light the rest of the time. Think cove ceilings, under-cabinet runs, toe-kicks, bar fronts, display cases, headboards, home theatres, retail shelving and accent walls. Because the RGB chips and a dedicated warm white chip sit on the same board, you never have to choose between a pink-ish "white" made of mixed colours and the cozy glow a living room actually needs.

This is a 24V DC strip drawing 19.2 W per metre, built at a dense 120 LEDs per metre on a 2 oz density white PCB for good heat spreading and even colour mixing. The white channel is 2700K and the CRI is 90+, so skin tones, wood, fabric and paint look right — a big deal in kitchens, bathrooms and boutiques. The 120° beam angle washes surfaces smoothly, the segment width is 12 mm and the tape is cuttable every 50 mm, so it follows cabinets, stairs and curves without waste. It is rated IP22 for indoor use, operates from -25°C to 60°C, is UL listed, and is rated for 50,000+ hours. Dimming and control options include DMX, PWM, RF PWM, 0-10V and MLV incandescent. Mounting is quick thanks to the 3M double-sided tape on non-porous surfaces, and reels are 5 m long.

From a condo kitchen in Montréal to a restaurant ceiling cove in Calgary, this RGBW colour-changing LED tape earns its place: warm white for everyday service, colour for holidays, branding, events or game nights. It pairs naturally with the rest of the 24V family, so you can mix technologies on one project — for example single-colour runs with the LED strip 19.2W/m 24V 96W 30K IP66 in damp areas, or pure colour zones with the LED strip 14.4W/m 24V 72W RGB IP22. Need tunable white instead? Look at the LED strip 20W/m 24V 100W IP22 CCT. Plan your 24V power supply and controller, and light your project the way you imagined it.

Built for even, flicker-free colour
This RGBW LED strip packs 120 LEDs per metre onto a 2 oz density white PCB. The heavier copper helps pull heat away from the diodes, which is what keeps colour and output stable over long runs, and the white board reflects light back out instead of absorbing it. The tape measures 12 mm wide and can be cut every 50 mm at the marked points, so you can trim runs to cabinet lengths, stair treads or shelf widths. Mounting on non-porous surfaces is done with the factory-applied 3M double-sided tape, and each reel is 5 m long.

Colour plus true warm white
RGBW means four channels: red, green and blue for saturated colour and effects, plus a dedicated 2700K white chip for everyday lighting. That warm white delivers CRI 90+, so materials, food, merchandise and skin tones read accurately — far better than trying to fake white by mixing RGB. The 120° beam angle spreads light wide and short, which is exactly what you want inside a cove, under an upper cabinet or behind a valance where the strip is close to the surface being washed.

Technical specifications
SKU: LCLS24V-96W-RGBW27K-IP22-30M
Voltage: 24V DC
Power consumption: 19.2W/M
LED density: 120 LEDs/m
Colour: RGBW – 2700K white channel
CRI: 90+
Beam angle: 120º
Segment width: 12 mm
Cuttable segments: 50 mm
Reel length: 5 m
Board type: 2 oz density, white PCB
Protection rating: IP22
Operating temperature: -25°C to 60°C
Dimming: DMX, PWM, RF PWM, 0-10V, MLV incandescent
Mounting: 3M double-sided tape (non-porous surfaces)
UL: Yes
Lifespan: 50,000+ hours

Wiring, power and control
Running at 24V DC, the strip needs a listed 24V power supply sized for the load — remember the draw is 19.2 W per metre, so add up your total metres before choosing the driver, plus headroom. The spec sheet's connection guide is clear on one point: parallel connections are strongly recommended, and you should not exceed the recommended run length. Push past it and the far end of the tape dims and the strip degrades over time. For a long, continuous visual line, use a middle connection — a parallel feed wired to the middle of the run — so both halves stay bright and even. On the control side, the four channels work with DMX, PWM, RF PWM, 0-10V and MLV incandescent dimming, which means everything from a simple remote scene controller to a full theatrical or architectural control system.

Where it works and what to pair it with
Its IP22 rating makes it an indoor product: kitchen coves and under-cabinet lighting, bedroom headboards and closets, basements and home theatres, staircases, reception desks, bar backs, retail shelving, display cases and restaurant ceilings. With an operating range of -25°C to 60°C, it also handles unheated indoor spaces and enclosed coves. Aluminum channel with a diffuser is the best friend of any LED tape: it hides dots, protects the strip and helps with heat. For wet or washdown areas, choose an IP66 version instead, such as the LED strip 9.6W/m 24V 48W 30K IP66 or the LED strip 19.2W/m 24V 96W 30K IP66; for subtle low-output accents, the LED strip 24V 4.8W/m IP22 3000K is an easy companion on the same 24V system. The full spec sheet, including the dimensional drawing and the parallel and middle connection diagrams, is in the Documentation tab.

Technical Files