24V 5M IP20 4MM COB LED STRIP - WHITE

Name: 24V 5M IP20 4MM COB LED STRIP - WHITE
Brand: LED MONTREAL
SKU: COB4-3000
Price: 104.97 CAD
Availability: InStock

SKU: COB4-3000

Brand: LED MONTREAL

Say goodbye to that row of little dots in your cove lighting. This 24V 5M IP20 4MM COB LED strip from LED MONTREAL (SKU COB4-3000) gives you one smooth, continuous line of light — the dotless look designers ask for and the reason so many people searching for LED strip lights, LED light strips or LED strip lighting end up choosing COB instead of an old-school SMD tape. At only 4mm wide and 2mm thick, this ribbon slips into places a standard LED lighting strip simply cannot go: under cabinets, inside shallow aluminum channels, along a stair nosing, behind a headboard, in a crown moulding cove or under a floating shelf. It is the go-to choice for accent lighting, indirect ceiling lighting and task lighting in kitchens, bathrooms, offices, retail displays and millwork.

The numbers behind the pretty light: this strip runs on 24V DC, draws 8W per meter and delivers a typical 800 lumens per meter, with a 98.4° beam angle that spreads light evenly instead of firing a hot line at your ceiling. Colour temperature is 3000K Warm White, and a CRI of 90+ means wood grain, skin tones, fabrics and paint colours look the way they should — a real difference on kitchen counters and in bathrooms. The 5 meter reel is built on a 3-ounce copper circuit board for better light consistency and heat dissipation, is rated IP20 for indoor use only, and is rated for 50,000+ hours. It is cULus certified for Canada and the USA, cuttable every 50mm, backed with 3M self-adhesive, and fully dimmable with a low-voltage dimmer/remote combo or a dimmable power supply paired with a 120V AC dimmer.

From a condo kitchen renovation in Montréal to a clinic reception desk, a café bar front or a basement stairwell, this COB LED strip does the quiet, expensive-looking work. Each reel ships with a female DC plug (15cm) on one end for a plug-in transformer and two wires (15cm) on the other end for hardwiring to a driver — so you can go plug-and-play or fully integrated. Plan on a power supply of at least 10W per meter, and while a heat sink is not mandatory, mounting the tape in an aluminum channel will keep it cool and looking sharp for years. Ready to draw a perfect line of light in your next project? Add this strip to your cart and build it your way.

Dotless light, thanks to COB
Traditional strips place individual LED chips a few millimetres apart, which is exactly why you see dots and scalloping on the wall above your cabinets. A COB LED strip (Chip On Board) covers the emitters with a continuous phosphor layer, so what you see is a single uninterrupted line of light. Add the 98.4° lighting angle and the result is a soft, wide, even wash — ideal for indirect LED ceiling light strip coves where every imperfection normally shows. The tape measures just 4mm wide and 2mm thick, which is what makes it so easy to hide inside slim millwork reveals and narrow extrusions.

Built like a professional-grade product
The circuit board uses 3 ounces of copper, roughly the kind of construction you want when a strip has to run several meters without visible voltage drop or hot spots. More copper means better current distribution and better heat dissipation, which directly protects colour consistency and lifespan — rated here at 50,000+ hours. The back carries a 3M self-adhesive backing for clean mounting on a smooth, degreased surface. Heat sinking is not strictly necessary, but installing the strip on a heat-dissipating surface or inside an appropriate aluminum channel is strongly recommended, and it also gives you a finished, professional edge plus a diffuser to soften the light even more.

Technical specifications
SKU: COB4-3000
Brand: LED MONTREAL
Model: COB4
Chip: COB
Length: 5 meters
Width: 4mm
Height: 2mm
Voltage: 24V DC
Power consumption: 8W/m
Recommended power supply: 10W/m
Typical luminous flux: 800 lumens/m (varies slightly with the Kelvin chosen)
Colour temperature: 3000K Warm White
CRI: 90+
Lighting angle: 98.4°
Circuit board: 3 ounces copper
Can be cut: every 50mm
IP rating: IP20, indoor use only
Operating temperature: 40C to -10C
Lifespan: 50,000+ hours
Certification: cULus for Canada and USA
Self-adhesive: 3M

Wiring, dimming and installation
Everything runs on safe 24V DC low voltage. The reel arrives with a female DC plug (15cm) at one end — perfect for a plug-in transformer — and two bare wires (15cm) at the other end for hardwiring to a driver inside a cabinet or ceiling. Size your power supply at 10W per meter to leave healthy headroom: a full 5 meter run therefore needs a driver rated accordingly. Cut only on the marked points, every 50mm, and respect polarity when you solder; note that no quick connector is available for this 4mm format, so soldering (or using the factory leads) is the way to go. For dimming, you have two proven paths: a low-voltage dimmer/remote combo installed after the power supply, or a dimmable power supply controlled by a 120V AC wall dimmer.

Where it works and what to read
Homeowners use it under kitchen cabinets, above upper cabinets for a warm ceiling glow, around bathroom mirrors, in closets, under stair treads and inside display niches. Contractors and small businesses put it behind reception desks, under retail shelving, along restaurant bar fronts, in hotel corridors and in office coves — anywhere a clean architectural line beats a visible fixture. The 3000K warm white tone suits residential and hospitality spaces, while the 90+ CRI keeps merchandise, food and finishes looking true. The full technical PDF for this 4mm COB LED strip is available in the Documentation tab of this page: check it before ordering your driver, channel and dimmer so everything lands right the first time.

Technical Files