2" LUNA LED ROUND FIXED COLOR SELECTABLE RECESSED FIXTURE - RA2-7F-90BN

2" LUNA LED ROUND FIXED COLOR SELECTABLE RECESSED FIXTURE - RA2-7F-90BN

SKU: RA2-7F-90BN

Brand: LITELINE

Small aperture, big presence: the 2" LUNA LED round fixed color selectable recessed fixture (SKU RA2-7F-90BN) from LITELINE packs a surprising amount of light into a discreet 2-inch opening. Call it a pot light, a round LED downlight or a mini recessed light — this is the fixture you reach for when you want clean ceilings, almost invisible hardware and a beautiful, low-glare beam. Its regressed optic sits deep in a brushed nickel trim, so you see the light, not the source. Homeowners renovating a kitchen or hallway, contractors finishing a condo, and shop owners lighting a display niche all use this little downlight the same way: rows of tidy, perfectly aligned points of light that make a room feel finished.

Under the trim sits a 7W LED module delivering up to 700 lumens and up to 103 lumens per watt, with a typical CRI of 96 so wood grain, paint, skin tones and merchandise look true. The on-fixture CCT selectable switch gives you five colour temperatures — 2700 K, 3000 K, 3500 K, 4000 K and 5000 K — with measured output of 626, 650, 675, 693 and 640 lumens respectively, so one box covers warm living spaces and crisp task areas. It runs on 100-135V AC, 50/60Hz, is dimmable from 100% to 10% with standard forward-phase / reverse-phase dimmers, and is rated Energy Star, cETLus, Class II, airtight, IC rated for direct contact with insulation and suitable for wet locations, indoors or out. Beam spread is 40°, projected life is 70% at 50,000 hours, and it carries a lifetime warranty. Hole cut: Ø 2½" (64 mm).

It shines in kitchens over counters and islands, in bathrooms and showers thanks to the wet location rating, in entries, closets, stairwells, covered porches and soffits that face a Canadian winter — the fixture starts down to -40°C (-40°F). Small retail, salons and cafés use it for wall niches and accent rows. Two spring-loaded clips grip any ceiling material for remodel work, and an optional pre-mounting plate handles new construction. Need a different look or a warm-dimming version? Match it with the 2" Luna round recessed fixture in white, the black finish version or the Dim-to-Warm brushed nickel model. Plan your layout and order yours today.

109.97$


Built to disappear into the ceiling
The LUNA 2" uses a durable airtight aluminum body with an anodized blue heat sink that keeps airflow moving around the LED module — the simplest way to protect light output over the long haul. The brushed nickel trim (BN) and regressed optics keep the source out of your sightline, which is exactly what you want in a low-ceiling basement, a hallway or a bedroom where glare ruins the mood. Overall depth is compact: 2¾" (70 mm) high with a 4 5⁄8" (117 mm) driver box, a 2 5⁄16" (59 mm) trim projection and a 2 13⁄16" (71 mm) diameter, for a Ø 2½" (64 mm) hole cut. Part of the DESIGNER SERIES 2", this small aperture pot light is also offered in 3", 3.5", 4" and 5" or 6" apertures when a project needs uniformity from room to room.

Light quality and colour control
A single CCT select switch on the fixture steps through five positions: 2700 K, 3000 K, 3500 K, 4000 K and 5000 K. Lumen output follows the setting — 626 lm at 2700 K, 650 lm at 3000 K, 675 lm at 3500 K, 693 lm at 4000 K and 640 lm at 5000 K — so you can stock one SKU and fine-tune on site instead of reordering. With a typical CRI of 96 and a 40° beam spread, colours stay honest and the pool of light stays controlled, which is why designers like this fixture over art walls, backsplashes and merchandising niches. Wall niches in small commercial spaces are a stated application for the LUNA 2".

Electrical, dimming and installation
The extruded aluminum hardwire box holds a 170 mA dimmable Class II electronic LED driver with 100-135V AC input, and three "Quick connect" push-in terminals make wiring fast. An 18" (457 mm) FT6 rated cable with a DC 2.1 connector links driver to fixture and is approved for use in plenums and suspended ceilings — note that it is not approved for branch wiring. Two spring-loaded clips let the housing snap into any ceiling material for remodel work, while an optional pre-mounting plate, hanger bars and butterfly brackets cover new construction; a 60" flexible connector is available to extend the distance between fixture and driver, along with a vapor barrier accessory and a commercial grade driver option. Dimming runs 100%-10% with industry standard forward-phase / reverse-phase dimmers.

Technical specifications
SKU: RA2-7F-90BN
Brand: LITELINE
Application: Ceiling recess mount
Approved location: Wet / insulated ceilings
Wattage: 7W
Lumens: Up to 700
Lumens per watt: Up to 103
CRI: 96
CCT (color selectable): 2700 K / 3000 K / 3500 K / 4000 K / 5000 K
Beam angle: 40°
Input: 100-135V AC, 50/60Hz
Dimming: Yes, 100%-10%, forward/reverse-phase
Power factor: 0.9
Hole cut: Ø 2½" (64 mm)
Class II: Yes
Certification: cETLus, Energy Star, JA8-2016, Title 24
IC rated: Yes, direct contact with insulation, airtight
Minimum starting temperature: -40°C (-40°F)
Projected life: 70% @ 50,000 hrs
Warranty: Lifetime
Finish: Brushed nickel (BN)

Applications, family and documentation
Think kitchen perimeter lighting on a dimmer, a run of four over a shower or tub, soffit and porch lighting that faces snow and rain, closet and stair lighting in a condo, or a discreet grid in a boutique or dental office. Because the LUNA 2" is IC rated and airtight, it drops straight into insulated ceilings without building a box around it — a real advantage in Canadian renovations where the attic is tight and the vapour barrier matters. Need the same fixture in another look, or a warm-dimming effect that mimics halogen? See the white 2" Luna recessed downlight, the black 2" Luna recessed downlight, or the Dim-to-Warm versions (3000 K ~ 2000 K) in brushed nickel and white. The full technical PDF spec sheet is available in the Documentation tab for dimensions, ordering guide and photometric data.

Related products

Top