Built to last, built to hideThe LUNA 2" starts with a durable airtight aluminum body and an anodized blue heat sink that keeps airflow moving around the LED light source — the key to long life in an insulated ceiling. The regressed optic pushes the light source back into the housing, which is why this
2 inch recessed downlight reads as a soft glow instead of a hot spot when you look up at it. The black (BK) trim finish is ideal for dark ceilings, media rooms and retail, where you want the light and not the fixture to be noticed. Because the fixture is airtight and approved for direct contact with insulation, it works in ceilings where air-sealing matters.
Light quality you can seeA 7 W LED module produces up to 700 lumens with a typical CRI of 96, and a 40° beam spread that layers nicely when fixtures are spaced along a hallway or over a counter. The on-fixture
colour selectable switch offers five positions — 2700 K, 3000 K, 3500 K, 4000 K and 5000 K — with measured output of 626, 650, 675, 693 and 640 lumens respectively, so you can warm up a bedroom and cool down a laundry room using the same stocked SKU. Dimming is smooth from 100% to 10% with industry standard forward-phase / reverse-phase dimmers (contact factory for the list of compatible dimmers).
Technical specificationsSKU: RA2-7F-90BK
Application: Ceiling recess mount
Approved location: Wet / insulated ceilings
Wattage: 7W
Lumens: Up to 700
Lumens per watt: Up to 103
CCT (colour selectable): 2700 K / 3000 K / 3500 K / 4000 K / 5000 K
CRI: 96
Beam angle: 40°
Input: 100-135V AC, 50/60Hz
Dimming: Yes, 100%-10%, forward/reverse-phase
Power factor: 0.9
Class II: Yes
Hole cut: Ø 2½" (64 mm)
Minimum starting temperature: -40°C (-40°F)
Projected life: 70% @ 50,000 hrs
Certification: cETLus, Energy Star, JA8-2016, Title 24
Colour: BK (black)
Warranty: Lifetime
Wiring and installationThe fixture ships with two spring loaded clips that grab any ceiling material, making remodel installs fast: cut a Ø 2½" (64 mm) hole, wire the box, tuck it up and push the fixture home. An optional pre-mounting plate is available for new construction. The extruded aluminum hardwire box holds a 170 mA dimmable Class II electronic LED driver with 100-135V AC input and three "Quick connect" push-in terminals for fast wiring. An 18" (457 mm) FT6 rated cable with a DC 2.1 connector links driver to fixture and is approved for use in plenums and suspended ceilings — note that it is not approved for branch wiring. Fixture dimensions include a 2¾" (70 mm) and 2 13⁄16" (71 mm) profile with a 4 5⁄8" (117 mm) driver box, so it fits where bigger cans cannot.
Where it works, and what pairs with itThink bathroom ceilings and shower stalls, covered entries and soffits, kitchen perimeters, wall niches in boutiques and clinics, stair nosings, and hotel corridors — the wet location rating and -40°C (-40°F) starting temperature make it a realistic choice for Canadian exterior soffits. For a uniform look across a whole project, LUNA is also available in 3", 3.5", 4" and 5" or 6". Mix finishes on the same job with the
white LUNA 2" round fixed or
brushed nickel LUNA 2" round fixed, and choose
Dim-to-Warm in black or
Dim-to-Warm in white for rooms where the light should warm from 3000 K to 2000 K as it dims. Full details, dimensions and the ordering guide are in the technical spec sheet available in the Documentation tab.