TRUNNION BRACKET FOR LED FLOODLIGHTS 400W-500W

Name: TRUNNION BRACKET FOR LED FLOODLIGHTS 400W-500W
Brand: LEDCO
SKU: LCFLD-BRACKET-500W-T-BK
Price: 58.97 CAD
Availability: InStock

SKU: LCFLD-BRACKET-500W-T-BK

Brand: LEDCO

Aiming is everything with a big floodlight, and that is exactly what this trunnion bracket for LED floodlights 400W-500W gives you. Also called a trunnion mount, a flood light bracket, a yoke or simply a light mounting bracket, it cradles the fixture between two arms so the head tilts up or down and locks exactly where you want it. Instead of a fixed head throwing light wherever it happens to point, you get a directional light source you fine-tune on site: a clean, even wall wash, a yard lit without glare spilling toward the neighbours, or a beam pushed deep into the far corner of a parking lot. Model LCFLD-BRACKET-500W-T-BK is the black, large-format version sized for high-output flood heads.

The bracket is built from rugged metal with a coated surface that resists corrosion, moisture and UV exposure, so it holds up in outdoor and wet-location installations as well as unheated indoor spaces like warehouses, shops and barns. Pre-drilled mounting holes and slotted hardware let you go surface, pole or ceiling mount, and the frame is designed to carry the weight of large, high-output LED flood fixtures rather than small decorative heads. The black finish disappears against dark soffits, steel structures and poles, which keeps the attention on the light rather than on the hardware. Because it is a pure mechanical accessory, there is nothing to wire, nothing to fail electrically and nothing to maintain beyond a quick check of the pivot bolts.

This is the hardware you reach for on commercial and industrial jobs: loading docks, truck yards, storage lots, arenas, farm buildings, construction sites and building façades — anywhere a Canadian winter, wind and road spray punish cheap mounting hardware. Mounting patterns vary from one fixture family to another, so confirm that the hole spacing and slot width match your flood before ordering; smaller heads are served by the Trunnion bracket for LED floodlights, and other aiming styles are available with the Knuckle bracket for LED floodlight, the Pole bracket for LED floodlights and the U bracket for LED floodlight. Order yours and aim your floodlight with confidence.

Compatible with
Works with:
Fixture: LCFLD400-450-500W-50K-UV-BK, LCFLD400-450-500W-50K-UV-BR

Built for heavy heads
A 400W to 500W LED flood is a serious piece of equipment, and the mounting hardware has to match. This trunnion bracket is made of rugged metal with a protective coated surface that stands up to corrosion, moisture and UV exposure. The two-arm yoke design distributes the load on both sides of the fixture instead of hanging everything off a single pivot, which is why it is the preferred solution for large, high-output flood heads mounted high on walls, poles and structural steel. The black finish blends into dark soffits, canopies and painted structures, keeping the installation visually clean.

Aiming and adjustment
The whole point of a trunnion mount is control. The head pivots between the arms so you can tilt it down to wash a loading dock, level it to light a yard, or raise it to graze a façade. Once the beam sits where you want it, the pivot bolts lock the position. On site, the sequence that saves headaches is simple: anchor into solid structure with hardware rated for the substrate, set your aim before fully torquing the pivot bolts, then tighten firmly and re-check the aim after the first windy week — vibration and thermal cycling can nudge a freshly set head.

Technical specifications
SKU: LCFLD-BRACKET-500W-T-BK
Type: Trunnion bracket (yoke-style aiming hardware)
Designed for: LED floodlights 400W-500W
Finish: Black
Material: Rugged metal with coated surface resistant to corrosion, moisture and UV
Mounting: Surface, pole or ceiling, using pre-drilled holes and slotted hardware
Location: Suitable for outdoor and wet-location installations, and unheated indoor spaces

Compatibility — read before ordering
This bracket is intended for large-format LED floodlights in the higher output range. Mounting patterns are not universal: hole spacing and slot width vary between fixture families, so measure your flood's mounting points and compare them before you order. If your fixtures are smaller, the same aiming style is offered in a compact size with the Trunnion bracket for LED floodlights, which pairs naturally with heads such as the 30-50-60W LED floodlight. For pole-top runs, the Pole bracket for LED floodlights is the better answer, while the Knuckle bracket for LED floodlight suits smaller fixtures that need quick single-point aiming.

Where it earns its keep
Contractors use trunnions on truck yards, storage and equipment lots, sports and arena lighting, building façades, quarries, farm buildings, warehouse exteriors and temporary construction lighting. Homeowners with large properties use them to light a driveway, a barn or a workshop wall without blinding the house next door. In Canadian conditions — freeze-thaw cycles, ice loading, road salt and summer sun — the coated metal construction and solid two-arm support are what keep a heavy flood pointed where you set it, season after season. There is no spec sheet or IES file listed in the Documentation tab for this mounting accessory; the photometrics you need come from the floodlight itself.