TRUNNION BRACKET FOR LED FLOODLIGHTS - LCFLD-BRACKET-T-BR

Name: TRUNNION BRACKET FOR LED FLOODLIGHTS - LCFLD-BRACKET-T-BR
Brand: LEDCO
SKU: LCFLD-BRACKET-T-BR
Price: 51.97 CAD
Availability: InStock

SKU: LCFLD-BRACKET-T-BR

Brand: LEDCO

Some floodlights arrive ready to bolt up, and some arrive as a bare fixture waiting for hardware — this is the hardware. The trunnion bracket for LED floodlights, SKU LCFLD-BRACKET-T-BR, is the U-shaped yoke people also call a trunnion mount, a flood light bracket, a light mounting bracket or simply an installation bracket. It cradles the floodlight on both sides, pivots on its bolts, and lets you aim the beam exactly where the light is needed — down a wall, across a parking area, over a yard or up onto a sign — then lock it there for good.

The design is all about control and durability. Because the yoke grips the fixture at two points instead of one, the floodlight stays put under vibration and wind load, so the angle you set on install day is the angle you still have next spring. It is made of durable, corrosion-resistant material with a protective finish, which is what you want for exterior use beside wet-location rated fixtures facing Canadian winters, road salt and freeze-thaw cycles. Mounting is flexible too: wall, ceiling, soffit, pole or ground stake, depending on the project. Several sizes are offered to match different floodlight bodies, so always check the mounting points and hole spacing on your fixture before ordering to be sure the hardware lines up.

This bracket earns its keep on house exteriors, garage and barn walls, warehouse loading docks, storage yards, small commercial parking lots, sports and play areas, sign lighting and construction sites. It is the natural companion to a compact floodlight such as the 30-50-60W LED floodlight, and if your job calls for a different mounting style you can compare the knuckle bracket for LED floodlight, the pole bracket for LED floodlights or the U bracket for LED floodlight. Pick the bracket that matches your fixture, aim it once, and enjoy light that lands exactly where you put it.

Compatible with
Works with:
Fixture: LCFLD-60W-50W-30W-CCT-MK-U

Built to hold an aim
A trunnion is the simplest, strongest way to hang a floodlight. The U-shaped yoke wraps the fixture and bolts to it on both sides, so the load is shared and the fixture cannot twist on a single pivot point. That two-point grip is why trunnion mounting is the standard choice on larger or wind-exposed installations: the bracket resists vibration and wind load, and it will not sag over time. Set the beam once and the aiming angle stays true long after the crew has packed up.

Materials and outdoor use
The bracket is made of durable, corrosion-resistant material with a protective finish and is intended for exterior use alongside wet-location rated fixtures. In Canada that matters: a mounting bracket lives through freezing rain, road spray, snow load and summer heat, and hardware that rusts or loosens turns a well-aimed floodlight into a light pointed at the sky. Solid construction keeps the pivot tight and the finish keeps the weather out.

Mounting and installation
The bracket suits wall, ceiling, soffit, pole or ground-stake mounting, depending on your project. Fasten it to a solid structural surface — framing, masonry anchors or a steel pole — using anchors rated for that substrate, never into siding alone. Leave the pivot bolts slightly loose while you position the fixture, swing the floodlight until the beam covers the target area, then tighten fully. Confirm the final angle after dark, when you can actually see where the light falls and where it spills onto a neighbour's window. On exterior walls, run weatherproof sealant at the fasteners so moisture cannot track behind the bracket and into the wall cavity.

Compatibility — check before you order
Several trunnion sizes are available to match different floodlight bodies, so measure the mounting points and hole spacing on your fixture before ordering to make sure the hardware lines up. This one carries SKU LCFLD-BRACKET-T-BR. Within the same family you will also find the trunnion bracket for LED floodlights in the other finish, the heavier trunnion bracket for LED floodlights 400W-500W for high-wattage bodies, plus the knuckle bracket for LED floodlight and the pole bracket for LED floodlights when the site calls for a knuckle-style swivel or a pole arm instead of a yoke.

Where it gets used
Contractors reach for trunnion brackets on warehouse and shop walls, loading docks, equipment yards, farm buildings, municipal and school grounds, tennis and pickleball courts, and sign or facade lighting. Homeowners use them over driveways, garage doors, decks and back yards, often paired with a compact floodlight like the 30-50-60W LED floodlight. In every case the value is the same: a bracket that keeps a modern LED floodlight pointed where you decided it should point, season after season. If a spec sheet or installation document is available for this bracket, you will find it in the Documentation tab of this page.